TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-High performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
-The application of a rounded cutting edge at the rear end of the flute suppresses machining streaks that occur when machining the side face in multiple steps (product shown in Fig. 3 only).
-The helix angle of 45° makes it ideal for high-speed machining, compared with the general helix angle of 30°
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
- TS
- General Steel
- 3 Flutes
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Figure | Under Neck Diameter d1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
79.75 € | 1 | Available | 5 Days | 2 | 3.5 | 6 | 80 | 30 | 1 | 1.9 | |
73.90 € | 1 | Available | 5 Days | 2.5 | 4.5 | 6 | 80 | 30 | 1 | 2.4 | |
64.59 € | 1 | Available | 5 Days | 3 | 5 | 6 | 80 | 30 | 1 | 2.9 | |
68.59 € | 1 | Available | 5 Days | 4 | 6 | 6 | 80 | 35 | 1 | 3.8 | |
75.33 € | 1 | Available | 5 Days | 5 | 8 | 6 | 100 | 50 | 1 | 4.8 | |
78.11 € | 1 | Available | 5 Days | 6 | 9 | 6 | 120 | 70 | 2 | 5.7 | |
95.83 € | 1 | Available | 5 Days | 7 | 12 | 6 | 135 | - | 3 | - | |
104.50 € | 1 | Available | 5 Days | 8 | 12 | 8 | 135 | 85 | 2 | 7.6 | |
111.40 € | 1 | Available | 5 Days | 8 | 12 | 6 | 135 | - | 3 | - | |
82.94 € | 1 | Available | 5 Days | 9 | 13 | 8 | 135 | - | 3 | - | |
120.32 € | 1 | Available | 5 Days | 10 | 15 | 10 | 150 | 100 | 2 | 9.5 | |
83.57 € | 1 | Available | 5 Days | 10 | 15 | 8 | 150 | - | 3 | - | |
139.98 € | 1 | Available | 5 Days | 11 | 18 | 10 | 160 | - | 3 | - | |
97.54 € | 1 | Available | 5 Days | 12 | 18 | 12 | 160 | 108 | 2 | 11.5 | |
107.38 € | 1 | Available | 5 Days | 12 | 18 | 10 | 160 | - | 3 | - | |
107.38 € | 1 | Available | 5 Days | 13 | 20 | 12 | 160 | - | 3 | - | |
152.06 € | 1 | Available | 5 Days | 16 | 24 | 16 | 180 | 120 | 2 | 15.5 | |
167.22 € | 1 | Available | 5 Days | 17 | 25 | 16 | 180 | - | 3 | - | |
272.29 € | 1 | Available | 5 Days | 18 | 27 | 16 | 180 | - | 3 | - | |
310.40 € | 1 | Available | 5 Days | 20 | 30 | 20 | 200 | 140 | 2 | 19.5 |
Loading...
Specifications
| Model Number | Shank Diameter d |
Flute Length ℓ |
Under Neck Diameter d1 |
Length Under Neck ℓ1 |
Overall Length L |
Figure | ||
| Outer Diameter D |
Shank Diameter d |
|||||||
| TSC-LS-HEM3S | 2 | — | 6 | 3.5 | 1.9 | 30 | 80 | 1 |
| 2.5 | — | 6 | 4.5 | 2.4 | 30 | 80 | 1 | |
| 3 | — | 6 | 5 | 2.9 | 30 | 80 | 1 | |
| 4 | — | 6 | 6 | 3.8 | 35 | 80 | 1 | |
| 5 | — | 6 | 8 | 4.8 | 50 | 100 | 1 | |
| 6 | — | 6 | 9 | 5.7 | 70 | 120 | 2 | |
| 7 | — | 6 | 12 | — | — | 135 | 3 | |
| 8 | 6 | 6 | 12 | — | — | 135 | 3 | |
| 8 | — | 8 | 12 | 7.6 | 85 | 135 | 2 | |
| 9 | — | 8 | 13 | — | — | 135 | 3 | |
| 10 | 8 | 8 | 15 | — | — | 150 | 3 | |
| 10 | — | 10 | 15 | 9.5 | 100 | 150 | 2 | |
| 11 | — | 10 | 18 | — | — | 160 | 3 | |
| 12 | 10 | 10 | 18 | — | — | 160 | 3 | |
| 12 | — | 12 | 18 | 11.5 | 108 | 160 | 2 | |
| 13 | — | 12 | 20 | — | — | 160 | 3 | |
| 16 | — | 16 | 24 | 15.5 | 120 | 180 | 2 | |
| 17 | — | 16 | 25 | — | — | 180 | 3 | |
| 18 | — | 16 | 27 | — | — | 180 | 3 | |
| 20 | — | 20 | 30 | 19.5 | 140 | 200 | 2 |
[ ! ] For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● The rounded edge of the blade rear end suppresses machining streaks caused by multi-stage machining of side surfaces (product in figure 3 only).
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 3 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Geometry | With Lead |
| Torsion Angle (θ) | Powerful Helix (45° to 60°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Type
- TSC-LS-HEM3S
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.