- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
TSC series carbide roughing end mill, fine pitch / long model
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
- TS
- General Steel
- 4 Flutes
- L (Long)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| SN-TSC-RFPL6-[30-75/1]-25 |
| SN-TSC-RFPL8-[35-76/1]-30 |
| SN-TSC-RFPL10-[40-70/1]-35 |
| SN-TSC-RFPL12-[45-90/1]-40 |
| SN-TSC-RFPL16-[65-93/1]-55 |
| SN-TSC-RFPL20-[75-112/1]-65 |
| TSC-RFPL6 |
| TSC-RFPL8 |
| TSC-RFPL10 |
| TSC-RFPL12 |
| TSC-RFPL16 |
| TSC-RFPL20 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Tolerance of OD (mm) | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Days | 6 | 25 | 6 | 100 | 30 ～ 75 | Standard Neck Relief | 0 ~ -0.058 | □ | ||
- | 1 | 8 Days | 8 | 30 | 8 | 100 | 35 ～ 76 | Standard Neck Relief | 0 ~ -0.058 | □ | ||
- | 1 | 8 Days | 10 | 35 | 10 | 100 | 40 ～ 70 | Standard Neck Relief | 0 ~ -0.07 | □ | ||
- | 1 | 8 Days | 12 | 40 | 12 | 125 | 45 ～ 90 | Standard Neck Relief | 0 ~ -0.07 | □ | ||
- | 1 | 8 Days | 16 | 55 | 16 | 125 | 65 ～ 93 | Standard Neck Relief | 0 ~ -0.07 | □ | ||
- | 1 | 8 Days | 20 | 65 | 20 | 150 | 75 ～ 112 | Standard Neck Relief | 0 ~ -0.084 | □ | ||
79.88 € | 1 | Available | 5 Days | 6 | 25 | 6 | 100 | - | Stocked Product | 0 ~ -0.058 | ● | |
82.05 € | 1 | Available | 5 Days | 8 | 30 | 8 | 100 | - | Stocked Product | 0 ~ -0.058 | ● | |
90.09 € | 1 | Available | 5 Days | 10 | 35 | 10 | 100 | - | Stocked Product | 0 ~ -0.07 | ● | |
92.06 € | 1 | Available | 5 Days | 12 | 40 | 12 | 125 | - | Stocked Product | 0 ~ -0.07 | ● | |
146.83 € | 1 | Available | 5 Days | 16 | 55 | 16 | 125 | - | Stocked Product | 0 ~ -0.07 | ● | |
218.41 € | 1 | Available | 5 Days | 20 | 65 | 20 | 150 | - | Stocked Product | 0 ~ -0.084 | ● |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Number of Flutes | |
| Outer Diameter D |
|||||
| TSC-RFPL | 6 | 25 | 100 | 6 | 4 |
| 8 | 30 | 100 | 8 | 4 | |
| 10 | 35 | 100 | 10 | 4 | |
| 12 | 40 | 125 | 12 | 4 | |
| 16 | 55 | 125 | 16 | 4 | |
| 20 | 65 | 150 | 20 | 4 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● It adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Roughing |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Geometry | Ultra-Small R |
| Torsion Angle (θ) | Weak Helix (15 to 25°) |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Standard Neck Relief
- Stocked Product
-
Type
- SN-TSC-RFPL
- TSC-RFPL
Filter by standard shipping days
-
- All
- 5 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.