- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Carbide Straight Edge Taper Corner Angle End Mill, 2-flute / Chamfering Blade Type
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| STCACMEM4-[0.5-2.5/0.01]-[5-85/1]-[0-59/1]-[0.1-1.15/0.01]-[0-30/1]-[0-59/1]-[0.5-8/0.5]-[0.5-1.7/0.1]-[F,T] |
| STCACMEM4-[0.5-2.5/0.01]-[5-85/1]-[0-59/1]-[0.1-1.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-1.7/0.1]-[F,T] |
| STCACMEM6-[0.5-4.5/0.01]-[5-85/1]-[0-59/1]-[0.1-2.15/0.01]-[0-30/1]-[0-59/1]-[0.5-10/0.5]-[0.5-2.7/0.1]-[F,T] |
| STCACMEM6-[0.5-4.5/0.01]-[5-85/1]-[0-59/1]-[0.1-2.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-2.7/0.1]-[F,T] |
| STCACMEM8-[0.5-6.5/0.01]-[5-85/1]-[0-59/1]-[0.1-3.15/0.01]-[0-30/1]-[0-59/1]-[0.5-12/0.5]-[0.5-3.7/0.1]-[F,T] |
| STCACMEM8-[0.5-6.5/0.01]-[5-85/1]-[0-59/1]-[0.1-3.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-3.7/0.1]-[F,T] |
| STCACMEM10-[0.5-8.5/0.01]-[5-85/1]-[0-59/1]-[0.1-4.15/0.01]-[0-30/1]-[0-59/1]-[0.5-14/0.5]-[0.5-4.7/0.1]-[F,T] |
| STCACMEM10-[0.5-8.5/0.01]-[5-85/1]-[0-59/1]-[0.1-4.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-4.7/0.1]-[F,T] |
| STCACMEM12-[0.5-10.5/0.01]-[0-85/1]-[0-59/1]-[0.1-5.15/0.01]-[0-30/1]-[0-59/1]-[0.5-16/0.5]-[0.5-5.7/0.1]-[F,T] |
| STCACMEM12-[0.5-10.5/0.01]-[0-85/1]-[0-59/1]-[0.1-5.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-5.7/0.1]-[F,T] |
| STCACMEM16-[0.5-14.5/0.01]-[5-85/1]-[0-59/1]-[0.1-7.15/0.01]-[0-30/1]-[0-59/1]-[0.5-20/0.5]-[0.5-7.7/0.1]-[F,T] |
| STCACMEM16-[0.5-14.5/0.01]-[5-85/1]-[0-59/1]-[0.1-7.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-7.7/0.1]-[F,T] |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Shank Diameter d (mm) | Overall Length L (mm) | #2 | #3 | #4 | #5 | #6 | #7 | #8 | #9 | 1D | 2D | 3D | 4D | F | T | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 7 Days | 4 | 50 | 0.5 ～ 2.5 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 1.15 | 0 ～ 30 | 0 ～ 59 | 0.5 ～ 8 | 0.5 ～ 1.7 | - | - | - | - | F | T | ||
- | 1 | 7 Days | 4 | 50 | 0.5 ～ 2.5 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 1.15 | 0 ～ 30 | 0 ～ 59 | - | 0.5 ～ 1.7 | 1 | 2 | 3 | 4 | F | T | ||
- | 1 | 7 Days | 6 | 60 | 0.5 ～ 4.5 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 2.15 | 0 ～ 30 | 0 ～ 59 | 0.5 ～ 10 | 0.5 ～ 2.7 | - | - | - | - | F | T | ||
- | 1 | 7 Days | 6 | 60 | 0.5 ～ 4.5 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 2.15 | 0 ～ 30 | 0 ～ 59 | - | 0.5 ～ 2.7 | 1 | 2 | 3 | 4 | F | T | ||
- | 1 | 7 Days | 8 | 60 | 0.5 ～ 6.5 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 3.15 | 0 ～ 30 | 0 ～ 59 | 0.5 ～ 12 | 0.5 ～ 3.7 | - | - | - | - | F | T | ||
- | 1 | 7 Days | 8 | 60 | 0.5 ～ 6.5 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 3.15 | 0 ～ 30 | 0 ～ 59 | - | 0.5 ～ 3.7 | 1 | 2 | 3 | 4 | F | T | ||
- | 1 | 7 Days | 10 | 80 | 0.5 ～ 8.5 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 4.15 | 0 ～ 30 | 0 ～ 59 | 0.5 ～ 14 | 0.5 ～ 4.7 | - | - | - | - | F | T | ||
- | 1 | 7 Days | 10 | 80 | 0.5 ～ 8.5 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 4.15 | 0 ～ 30 | 0 ～ 59 | - | 0.5 ～ 4.7 | 1 | 2 | 3 | 4 | F | T | ||
- | 1 | 7 Days | 12 | 80 | 0.5 ～ 10.5 | 0 ～ 85 | 0 ～ 59 | 0.1 ～ 5.15 | 0 ～ 30 | 0 ～ 59 | 0.5 ～ 16 | 0.5 ～ 5.7 | - | - | - | - | F | T | ||
- | 1 | 7 Days | 12 | 80 | 0.5 ～ 10.5 | 0 ～ 85 | 0 ～ 59 | 0.1 ～ 5.15 | 0 ～ 30 | 0 ～ 59 | - | 0.5 ～ 5.7 | 1 | 2 | 3 | 4 | F | T | ||
- | 1 | 7 Days | 16 | 100 | 0.5 ～ 14.5 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 7.15 | 0 ～ 30 | 0 ～ 59 | 0.5 ～ 20 | 0.5 ～ 7.7 | - | - | - | - | F | T | ||
- | 1 | 7 Days | 16 | 100 | 0.5 ～ 14.5 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 7.15 | 0 ～ 30 | 0 ～ 59 | - | 0.5 ～ 7.7 | 1 | 2 | 3 | 4 | F | T |
Loading...
Specification Table
| Model Number | Blade Diameter D 0.01mm Unit Specification | Corner Angle (Single corner) θ1 °−min 1' Unit Specification | Angle Width D1 0.1 mm Unit Specification | Single Corner θ2 °−min 1' Unit Specification | Blade Length* ℓ 0.5mm Unit Specification | Chamfering Blade Width* CM 0.1 mm Unit Specification | Bottom Blade Shape (Selection) | Blade ℓ1 | Overall Length L | ||
| Shank diameter d | |||||||||||
| Specified Range | ℓmax. | ||||||||||
| STCACMEM | 4 | 0.50 to 2.50 | 5°0' to 85°0' | 0.1 ≤ D1 ≤ (D−0.2)/2 | 0°15' to 30°0' | (1) 0.5 ≤ ℓ ≤ D×4 and (2) ℓ ≤ ℓmax. (See table at right) and (3)  | 8.0 | 0.5 ≤ CM ≤ * | T (Indented Center) F (Flat) | ℓ1 = ℓ+CM | 50 |
| 6 | 0.50 to 4.50 | 10.0 | 60 | ||||||||
| 8 | 0.50 to 6.50 | 12.0 | 60 | ||||||||
| 10 | 0.50 to 8.50 | 14.0 | 80 | ||||||||
| 12 | 0.50 to 10.50 | 16.0 | 80 | ||||||||
| 16 | 0.50 to 14.50 | 20.0 | 100 | ||||||||
*Note that the chamfering blade width (CM) may not be available depending on the size.
Maximum chamfering blade width CM (max) = (d − D − tan θ× ℓ × 2) / 2
*Specify ℓ so that it meets all the conditions of (1), (2) and (3).
*Depending on the size of ℓ, all slope angles may be the blade length.
Click here for the cutting conditions
Basic information
| Material | Ultrafine Particulate Carbide | Cutting Part ℓ1(mm) | ℓ1 = ℓ + CM |
|---|
Configure
Basic Attributes
-
Shank Diameter d(mm)
- 4
- 6
- 8
- 10
- 12
- 16
-
Overall Length L(mm)
-
#2
-
#3
-
#4
-
#5
-
#6
-
#7
-
#8
-
#9
-
1D
- 1
-
2D
- 2
-
3D
- 3
-
4D
- 4
-
F
- F
-
T
- T
-
Type
- STCACMEM
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.