TiAlN Coated Carbide Drill with Corner Radius, Stub Model, Regular Model
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
[Features]
-Corner radius treatment suppresses chipping
-The waveform achieves excellent cutting sharpness and strength and promotes chip evacuation
-The high centripetal force is demonstrated by the use of triple rake + R-thinning
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
-Corner radius treatment suppresses chipping
-The waveform achieves excellent cutting sharpness and strength and promotes chip evacuation
-The high centripetal force is demonstrated by the use of triple rake + R-thinning
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TAC-CR-RFESDBA8.5
Part Number
|
|---|
| TAC-CR-RFESDBA8.5 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | |
|---|---|---|---|---|
118.25 € | 1 | Available | 5 Days |
Loading...
Specifications
| Groove Length ℓ | Overall Length L | Shank Diameter d | ||
| Diameter D | ||||
| TAC-CR-RFESDRA | 3 | 28 | 66 | 6 |
| 3.2 | 28 | 66 | 6 | |
| 3.3 | 28 | 66 | 6 | |
| 3.8 | 36 | 74 | 6 | |
| 4 | 36 | 74 | 6 | |
| 4.2 | 36 | 74 | 6 | |
| 4.5 | 36 | 74 | 6 | |
| 5 | 44 | 82 | 6 | |
| 5.3 | 44 | 82 | 6 | |
| 5.5 | 44 | 82 | 6 | |
| 6 | 44 | 82 | 6 | |
| 6.3 | 53 | 91 | 8 | |
| 6.5 | 53 | 91 | 8 | |
| 6.8 | 53 | 91 | 8 | |
| 7 | 53 | 91 | 8 | |
| 7.8 | 53 | 91 | 8 | |
| 8 | 53 | 91 | 8 | |
| 8.5 | 61 | 103 | 10 | |
| 9 | 61 | 103 | 10 | |
| 9.3 | 61 | 103 | 10 | |
| 9.5 | 61 | 103 | 10 | |
| 10 | 61 | 103 | 10 | |
| 10.3 | 71 | 118 | 12 | |
| 10.5 | 71 | 118 | 12 | |
| 10.8 | 71 | 118 | 12 | |
| 11 | 71 | 118 | 12 | |
| 11.5 | 71 | 118 | 12 | |
| 12 | 71 | 118 | 12 | |
| 13 | 77 | 124 | 14 |
For Cutting Conditions, Refer to >>Click here.
More Information
● Chipping is prevented with a corner radius coating.
● Adopting a wave-shaped blade provides for outstanding sharpness and strength and also promotes the discharge of cutting chips.
● The provision of three rakes + R thinning demonstrates extremely good centripetal properties.
● Using a combination of ultrafine particulate carbide + TiAℓN coating, it has superior wear resistance, which allows for high-speed machining.
Basic information
| Hole diameter (drill diameter) D(mm) | 8.5 | Groove Length L(mm) | 47 | work material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron |
|---|---|---|---|---|---|
| Tool Material Type | Carbide | Overall Length L(mm) | 89 | Shank Type | End Mill Shank |
| Coating Y/N | Included | Coating Type | TiAlN | With/without Oil Hole | None |
| Point Angle(°) | 140 | Thinning | Included | Shank Diameter d | 10 |
| Diameter Tolerance | 0 ~ -0.015 | Tolerance of Shank Diameter | 0 ~ -0.009 |
This page is TiAlN Coated Carbide Drill with Corner Radius, Stub Model, Regular Model, part number TAC-CR-RFESDBA8.5.
You can find the detail information about specifications and dimensions on part number TAC-CR-RFESDBA8.5.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.