Ball screw nuts / block nut / diameter 14 - 45 / pitch 4 - 12 / BNT
- Volume Discount
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.
- Stock
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Screw Shaft O.D. d (mm) | Lead (mm) | Axial gap | Number of Load Circuits (Rows x Windings) | Basic Load Rating Dynamic Rating Ca (N) | Basic Load Rating Static Rating Coa (N) | Dust-proof Seal Type | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
227.85 € | 1 | 20 Days | 10 | 14 | 4 | 0.1 | 1×3.65 | 5500 | 11500 | NA | ||
280.97 € | 1 | 6 Days | 10 | 14 | 4 | 0.1 | 1×3.65 | 5500 | 11500 | Brush seal | ||
227.85 € | 1 | 20 Days | 10 | 14 | 5 | 0.1 | 1×2.65 | 5000 | 11400 | NA | ||
280.97 € | 1 | 6 Days | 10 | 14 | 5 | 0.1 | 1×2.65 | 5000 | 11400 | Brush seal | ||
252.88 € | 1 | 20 Days | 10 | 16 | 5 | 0.1 | 1×2.65 | 5400 | 13300 | NA | ||
309.22 € | 1 | 6 Days | 10 | 16 | 5 | 0.1 | 1×2.65 | 5400 | 13300 | Brush seal | ||
317.97 € | 1 | 20 Days | 10 | 18 | 8 | 0.1 | 1×3.65 | 13100 | 31000 | NA | ||
378.29 € | 1 | 23 Days | - | 18 | 8 | 0.1 | 1×3.65 | 13100 | 31000 | Brush seal | ||
240.36 € | 1 | 20 Days | 10 | 20 | 5 | 0.1 | 1×2.65 | 6000 | 16500 | NA | ||
325.57 € | 1 | Available | 6 Days | 10 | 20 | 5 | 0.1 | 1×2.65 | 6000 | 16500 | Brush seal | |
240.36 € | 1 | 20 Days | 10 | 20 | 10 | 0.1 | 1×2.65 | 10600 | 25100 | NA | ||
302.86 € | 1 | 6 Days | 10 | 20 | 10 | 0.1 | 1×2.65 | 10600 | 25100 | Brush seal | ||
262.90 € | 1 | 20 Days | 10 | 25 | 5 | 0.1 | 1×2.65 | 6700 | 20800 | NA | ||
327.89 € | 1 | 6 Days | 10 | 25 | 5 | 0.1 | 1×2.65 | 6700 | 20800 | Brush seal | ||
390.58 € | 1 | 20 Days | 10 | 25 | 10 | 0.1 | 2×2.65 | 31200 | 83700 | NA | ||
453.64 € | 1 | 6 Days | 10 | 25 | 10 | 0.1 | 2×2.65 | 31200 | 83700 | Brush seal | ||
290.43 € | 1 | 20 Days | 10 | 28 | 6 | 0.1 | 1×2.65 | 7000 | 23400 | NA | ||
361.03 € | 1 | 23 Days | - | 28 | 6 | 0.1 | 1×2.65 | 7000 | 23400 | Brush seal | ||
360.52 € | 1 | 20 Days | 10 | 28 | 6 | 0.1 | 2×2.65 | 12800 | 46800 | NA | ||
416.49 € | 1 | 6 Days | 10 | 28 | 6 | 0.1 | 2×2.65 | 12800 | 46800 | Brush seal | ||
458.18 € | 1 | 20 Days | 10 | 32 | 10 | [0.2 or Less (Rolled)] 0.14 | 1×2.65 | 19800 | 53800 | NA | ||
527.42 € | 1 | 23 Days | - | 32 | 10 | [0.2 or Less (Rolled)] 0.14 | 1×2.65 | 19800 | 53800 | Brush seal | ||
548.31 € | 1 | 20 Days | 10 | 32 | 10 | [0.2 or Less (Rolled)] 0.14 | 2×2.65 | 36000 | 107500 | NA | ||
616.90 € | 1 | 6 Days | 10 | 32 | 10 | [0.2 or Less (Rolled)] 0.14 | 2×2.65 | 36000 | 107500 | Brush seal | ||
453.18 € | 1 | 20 Days | 10 | 36 | 10 | [0.2 or Less (Rolled)] 0.17 | 1×2.65 | 20800 | 59300 | NA | ||
527.42 € | 1 | 23 Days | - | 36 | 10 | [0.2 or Less (Rolled)] 0.17 | 1×2.65 | 20800 | 59300 | Brush seal | ||
578.37 € | 1 | 20 Days | 10 | 36 | 10 | [0.2 or Less (Rolled)] 0.17 | 2×2.65 | 37800 | 118700 | NA | ||
625.79 € | 1 | 23 Days | - | 36 | 10 | [0.2 or Less (Rolled)] 0.17 | 2×2.65 | 37800 | 118700 | Brush seal | ||
823.73 € | 1 | 20 Days | 10 | 45 | 12 | 0.2 | 2×2.65 | 49500 | 169000 | NA | ||
901.03 € | 1 | 23 Days | - | 45 | 12 | 0.2 | 2×2.65 | 49500 | 169000 | Brush seal |
Loading...
Basic information
| Type | Rolled | Features | Standard | Flange Shape | Block |
|---|---|---|---|---|---|
| Preload | NA | Conditions of Use | Standard / Dust Proofing | Nut Shape | Single |
| Circuit System | Return Pipe Type | Screw Type | Single nut |
Configure
Basic Attributes
-
Screw Shaft O.D. d(mm)
-
Lead(mm)
-
Axial gap
- 0.2
- 0.1
- 0.2 or Less (Rolled)
-
Number of Load Circuits(Rows x Windings)
- 1×2.65
- 2×2.65
- 1×3.65
-
Dust-proof Seal Type
- Brush seal
- NA
-
Type
- BNT
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 6 Days or Less
- 20 Days or Less
- 23 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.