- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
All Ball LM Guide, World Standard, HSR-M1 Type for High Temperature
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| HSR15M1A[1,2,3,4,5,6,7,8,9]+[67-1240/1]L |
| HSR15M1A[1,2,3,4,5,6,7,8,9]+[67-1240/1]L[H,P,SP,UP] |
| HSR15M1A[1,2,3,4,5,6,7,8,9]C1+[67-1240/1]L |
| HSR15M1A[1,2,3,4,5,6,7,8,9]C1+[67-1240/1]L[H,P,SP,UP] |
| HSR15M1B[1,2,3,4,5,6,7,8,9]+[67-1240/1]L |
| HSR15M1B[1,2,3,4,5,6,7,8,9]+[67-1240/1]L[H,P,SP,UP] |
| HSR15M1B[1,2,3,4,5,6,7,8,9]C1+[67-1240/1]L |
| HSR15M1B[1,2,3,4,5,6,7,8,9]C1+[67-1240/1]L[H,P,SP,UP] |
| HSR15M1YR[1,2,3,4,5,6,7,8,9]+[67-1240/1]L |
| HSR15M1YR[1,2,3,4,5,6,7,8,9]+[67-1240/1]L[H,P,SP,UP] |
| HSR15M1YR[1,2,3,4,5,6,7,8,9]C1+[67-1240/1]L |
| HSR15M1YR[1,2,3,4,5,6,7,8,9]C1+[67-1240/1]L[H,P,SP,UP] |
| HSR20M1A[1,2,3,4,5,6,7,8,9]+[89-1500/1]L |
| HSR20M1A[1,2,3,4,5,6,7,8,9]+[89-1500/1]L[H,P,SP,UP] |
| HSR20M1A[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]L |
| HSR20M1A[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]L[H,P,SP,UP] |
| HSR20M1B[1,2,3,4,5,6,7,8,9]+[89-1500/1]L |
| HSR20M1B[1,2,3,4,5,6,7,8,9]+[89-1500/1]L[H,P,SP,UP] |
| HSR20M1B[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]L |
| HSR20M1B[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]L[H,P,SP,UP] |
| HSR20M1LA[1,2,3,4,5,6,7,8,9]+[105-1500/1]L |
| HSR20M1LA[1,2,3,4,5,6,7,8,9]+[105-1500/1]L[H,P,SP,UP] |
| HSR20M1LA[1,2,3,4,5,6,7,8,9]C[0,1]+[105-1500/1]L |
| HSR20M1LA[1,2,3,4,5,6,7,8,9]C[0,1]+[105-1500/1]L[H,P,SP,UP] |
| HSR20M1LB[1,2,3,4,5,6,7,8,9]+[105-1500/1]L |
| HSR20M1LB[1,2,3,4,5,6,7,8,9]+[105-1500/1]L[H,P,SP,UP] |
| HSR20M1LB[1,2,3,4,5,6,7,8,9]C[0,1]+[105-1500/1]L |
| HSR20M1LB[1,2,3,4,5,6,7,8,9]C[0,1]+[105-1500/1]L[H,P,SP,UP] |
| HSR20M1LR[1,2,3,4,5,6,7,8,9]+[105-1500/1]L |
| HSR20M1LR[1,2,3,4,5,6,7,8,9]+[105-1500/1]L[H,P,SP,UP] |
| HSR20M1LR[1,2,3,4,5,6,7,8,9]C[0,1]+[105-1500/1]L |
| HSR20M1LR[1,2,3,4,5,6,7,8,9]C[0,1]+[105-1500/1]L[H,P,SP,UP] |
| HSR20M1R[1,2,3,4,5,6,7,8,9]+[89-1500/1]L |
| HSR20M1R[1,2,3,4,5,6,7,8,9]+[89-1500/1]L[H,P,SP,UP] |
| HSR20M1R[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]L |
| HSR20M1R[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]L[H,P,SP,UP] |
| HSR20M1YR[1,2,3,4,5,6,7,8,9]+[89-1500/1]L |
| HSR20M1YR[1,2,3,4,5,6,7,8,9]+[89-1500/1]L[H,P,SP,UP] |
| HSR20M1YR[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]L |
| HSR20M1YR[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]L[H,P,SP,UP] |
| HSR25M1A[1,2,3,4,5,6,7,8,9]+[97-1500/1]L |
| HSR25M1A[1,2,3,4,5,6,7,8,9]+[97-1500/1]L[H,P,SP,UP] |
| HSR25M1A[1,2,3,4,5,6,7,8,9]C[0,1]+[97-1500/1]L |
| HSR25M1A[1,2,3,4,5,6,7,8,9]C[0,1]+[97-1500/1]L[H,P,SP,UP] |
| HSR25M1B[1,2,3,4,5,6,7,8,9]+[97-1500/1]L |
| HSR25M1B[1,2,3,4,5,6,7,8,9]+[97-1500/1]L[H,P,SP,UP] |
| HSR25M1B[1,2,3,4,5,6,7,8,9]C[0,1]+[97-1500/1]L |
| HSR25M1B[1,2,3,4,5,6,7,8,9]C[0,1]+[97-1500/1]L[H,P,SP,UP] |
| HSR25M1LA[1,2,3,4,5,6,7,8,9]+[116-1500/1]L |
| HSR25M1LA[1,2,3,4,5,6,7,8,9]+[116-1500/1]L[H,P,SP,UP] |
| HSR25M1LA[1,2,3,4,5,6,7,8,9]C[0,1]+[116-1500/1]L |
| HSR25M1LA[1,2,3,4,5,6,7,8,9]C[0,1]+[116-1500/1]L[H,P,SP,UP] |
| HSR25M1LB[1,2,3,4,5,6,7,8,9]+[116-1500/1]L |
| HSR25M1LB[1,2,3,4,5,6,7,8,9]+[116-1500/1]L[H,P,SP,UP] |
| HSR25M1LB[1,2,3,4,5,6,7,8,9]C[0,1]+[116-1500/1]L |
| HSR25M1LB[1,2,3,4,5,6,7,8,9]C[0,1]+[116-1500/1]L[H,P,SP,UP] |
| HSR25M1LR[1,2,3,4,5,6,7,8,9]+[116-1500/1]L |
| HSR25M1LR[1,2,3,4,5,6,7,8,9]+[116-1500/1]L[H,P,SP,UP] |
| HSR25M1LR[1,2,3,4,5,6,7,8,9]C[0,1]+[116-1500/1]L |
| HSR25M1LR[1,2,3,4,5,6,7,8,9]C[0,1]+[116-1500/1]L[H,P,SP,UP] |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Block Type | Rail Width W1 (mm) | Mounting Height M (mm) | The number of LM blocks combined with a axis | Rail Length L (mm) | Radial Clearance | Accuracy Grade | Nominal Part Number | Basic Load Rating Dynamic Rating C (N) | Basic Load Rating Static Rating Co (N) | Allowable Static Moment MA (Nm) | Allowable Static Moment MB (Nm) | Allowable Static Moment MC (Nm) | Block Mounting Hole Pitch (Width Direction) (mm) | Block Mounting Hole Pitch (Length Direction) (mm) | Block Mounting Hole Diameter | Rail Mounting Hole Pitch (mm) | Rail Mounting Hole Diameter | Block external dimension W (mm) | Block external dimension L (mm) | Mounting hole for blocks | Mounting Hole Dimension H (ø) | Mounting Hole Screw Depth (mm) | Block dimension L1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 19 Days | Wide | 15 | 24 | 1 ～ 9 | 67 ～ 1240 | Normal | Standard Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 59.6 | Tapped Hole | - | Through | 38.8 | ||
- | 1 | 19 Days | Wide | 15 | 24 | 1 ～ 9 | 67 ～ 1240 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 59.6 | Tapped Hole | - | Through | 38.8 | ||
- | 1 | 19 Days | Wide | 15 | 24 | 1 ～ 9 | 67 ～ 1240 | Light Preload | Standard Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 59.6 | Tapped Hole | - | Through | 38.8 | ||
- | 1 | 19 Days | Wide | 15 | 24 | 1 ～ 9 | 67 ～ 1240 | Light Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 59.6 | Tapped Hole | - | Through | 38.8 | ||
- | 1 | 19 Days | Wide | 15 | 24 | 1 ～ 9 | 67 ～ 1240 | Normal | Standard Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 59.6 | Drilled Hole | 4.5 | Through | 38.8 | ||
- | 1 | 19 Days | Wide | 15 | 24 | 1 ～ 9 | 67 ～ 1240 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 59.6 | Drilled Hole | 4.5 | Through | 38.8 | ||
- | 1 | 19 Days | Wide | 15 | 24 | 1 ～ 9 | 67 ～ 1240 | Light Preload | Standard Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 59.6 | Drilled Hole | 4.5 | Through | 38.8 | ||
- | 1 | 19 Days | Wide | 15 | 24 | 1 ～ 9 | 67 ～ 1240 | Light Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 59.6 | Drilled Hole | 4.5 | Through | 38.8 | ||
- | 1 | 19 Days | Standard | 15 | 28 | 1 ～ 9 | 67 ～ 1240 | Normal | Standard Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 11.5 | 18 | 4 | 60 | 4.5 | 33.5 | 59.6 | Tapped Hole | - | 5 | 38.8 | ||
- | 1 | 19 Days | Standard | 15 | 28 | 1 ～ 9 | 67 ～ 1240 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 11.5 | 18 | 4 | 60 | 4.5 | 33.5 | 59.6 | Tapped Hole | - | 5 | 38.8 | ||
- | 1 | 19 Days | Standard | 15 | 28 | 1 ～ 9 | 67 ～ 1240 | Light Preload | Standard Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 11.5 | 18 | 4 | 60 | 4.5 | 33.5 | 59.6 | Tapped Hole | - | 5 | 38.8 | ||
- | 1 | 19 Days | Standard | 15 | 28 | 1 ～ 9 | 67 ～ 1240 | Light Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 15 | 8330 | 13500 | 80.5 | 80.5 | 84.4 | 11.5 | 18 | 4 | 60 | 4.5 | 33.5 | 59.6 | Tapped Hole | - | 5 | 38.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Normal | Standard Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 53 | 40 | 6 | 60 | 4.5 | 63 | 76 | Tapped Hole | - | Through | 50.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 53 | 40 | 6 | 60 | 4.5 | 63 | 76 | Tapped Hole | - | Through | 50.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 53 | 40 | 6 | 60 | 4.5 | 63 | 76 | Tapped Hole | - | Through | 50.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 53 | 40 | 6 | 60 | 4.5 | 63 | 76 | Tapped Hole | - | Through | 50.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Normal | Standard Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 53 | 40 | 6 | 60 | 4.5 | 63 | 76 | Drilled Hole | 6 | Through | 50.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 53 | 40 | 6 | 60 | 4.5 | 63 | 76 | Drilled Hole | 6 | Through | 50.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 53 | 40 | 6 | 60 | 4.5 | 63 | 76 | Drilled Hole | 6 | Through | 50.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 53 | 40 | 6 | 60 | 4.5 | 63 | 76 | Drilled Hole | 6 | Through | 50.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Normal | Standard Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 53 | 40 | 6 | 60 | 4.5 | 63 | 92 | Tapped Hole | - | Through | 66.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 53 | 40 | 6 | 60 | 4.5 | 63 | 92 | Tapped Hole | - | Through | 66.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 53 | 40 | 6 | 60 | 4.5 | 63 | 92 | Tapped Hole | - | Through | 66.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 53 | 40 | 6 | 60 | 4.5 | 63 | 92 | Tapped Hole | - | Through | 66.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Normal | Standard Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 53 | 40 | 6 | 60 | 4.5 | 63 | 92 | Drilled Hole | 6 | Through | 66.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 53 | 40 | 6 | 60 | 4.5 | 63 | 92 | Drilled Hole | 6 | Through | 66.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 53 | 40 | 6 | 60 | 4.5 | 63 | 92 | Drilled Hole | 6 | Through | 66.8 | ||
- | 1 | 44 Days | Wide | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 53 | 40 | 6 | 60 | 4.5 | 63 | 92 | Drilled Hole | 6 | Through | 66.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Normal | Standard Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 32 | 50 | 5 | 60 | 4.5 | 44 | 92 | Tapped Hole | - | 6 | 66.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 32 | 50 | 5 | 60 | 4.5 | 44 | 92 | Tapped Hole | - | 6 | 66.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 32 | 50 | 5 | 60 | 4.5 | 44 | 92 | Tapped Hole | - | 6 | 66.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 105 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 21300 | 31800 | 323 | 323 | 270 | 32 | 50 | 5 | 60 | 4.5 | 44 | 92 | Tapped Hole | - | 6 | 66.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Normal | Standard Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 32 | 36 | 5 | 60 | 4.5 | 44 | 76 | Tapped Hole | - | 6 | 50.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 32 | 36 | 5 | 60 | 4.5 | 44 | 76 | Tapped Hole | - | 6 | 50.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 32 | 36 | 5 | 60 | 4.5 | 44 | 76 | Tapped Hole | - | 6 | 50.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 32 | 36 | 5 | 60 | 4.5 | 44 | 76 | Tapped Hole | - | 6 | 50.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Normal | Standard Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 11.5 | 25 | 5 | 60 | 4.5 | 43.5 | 76 | Tapped Hole | - | 6 | 50.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 11.5 | 25 | 5 | 60 | 4.5 | 43.5 | 76 | Tapped Hole | - | 6 | 50.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 11.5 | 25 | 5 | 60 | 4.5 | 43.5 | 76 | Tapped Hole | - | 6 | 50.8 | ||
- | 1 | 44 Days | Standard | 20 | 30 | 1 ～ 9 | 89 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 20 | 13800 | 23800 | 190 | 190 | 201 | 11.5 | 25 | 5 | 60 | 4.5 | 43.5 | 76 | Tapped Hole | - | 6 | 50.8 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 97 ～ 1500 | Normal | Standard Grade | 25 | 19900 | 34400 | 307 | 307 | 344 | 57 | 45 | 8 | 60 | 7 | 70 | 83.9 | Tapped Hole | - | Through | 59.5 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 97 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 25 | 19900 | 34400 | 307 | 307 | 344 | 57 | 45 | 8 | 60 | 7 | 70 | 83.9 | Tapped Hole | - | Through | 59.5 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 97 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 25 | 19900 | 34400 | 307 | 307 | 344 | 57 | 45 | 8 | 60 | 7 | 70 | 83.9 | Tapped Hole | - | Through | 59.5 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 97 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 25 | 19900 | 34400 | 307 | 307 | 344 | 57 | 45 | 8 | 60 | 7 | 70 | 83.9 | Tapped Hole | - | Through | 59.5 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 97 ～ 1500 | Normal | Standard Grade | 25 | 19900 | 34400 | 307 | 307 | 344 | 57 | 45 | 7 | 60 | 7 | 70 | 83.9 | Drilled Hole | 7 | Through | 59.5 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 97 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 25 | 19900 | 34400 | 307 | 307 | 344 | 57 | 45 | 7 | 60 | 7 | 70 | 83.9 | Drilled Hole | 7 | Through | 59.5 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 97 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 25 | 19900 | 34400 | 307 | 307 | 344 | 57 | 45 | 7 | 60 | 7 | 70 | 83.9 | Drilled Hole | 7 | Through | 59.5 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 97 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 25 | 19900 | 34400 | 307 | 307 | 344 | 57 | 45 | 7 | 60 | 7 | 70 | 83.9 | Drilled Hole | 7 | Through | 59.5 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 116 ～ 1500 | Normal | Standard Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 57 | 45 | 8 | 60 | 7 | 70 | 103 | Tapped Hole | - | Through | 78.6 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 116 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 57 | 45 | 8 | 60 | 7 | 70 | 103 | Tapped Hole | - | Through | 78.6 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 116 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 57 | 45 | 8 | 60 | 7 | 70 | 103 | Tapped Hole | - | Through | 78.6 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 116 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 57 | 45 | 8 | 60 | 7 | 70 | 103 | Tapped Hole | - | Through | 78.6 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 116 ～ 1500 | Normal | Standard Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 57 | 45 | 7 | 60 | 7 | 70 | 103 | Drilled Hole | 7 | Through | 78.6 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 116 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 57 | 45 | 7 | 60 | 7 | 70 | 103 | Drilled Hole | 7 | Through | 78.6 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 116 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 57 | 45 | 7 | 60 | 7 | 70 | 103 | Drilled Hole | 7 | Through | 78.6 | ||
- | 1 | 23 Days | Wide | 23 | 36 | 1 ～ 9 | 116 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 57 | 45 | 7 | 60 | 7 | 70 | 103 | Drilled Hole | 7 | Through | 78.6 | ||
- | 1 | 23 Days | Standard | 23 | 40 | 1 ～ 9 | 116 ～ 1500 | Normal | Standard Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 35 | 50 | 8 | 60 | 7 | 48 | 103 | Tapped Hole | - | 8 | 78.6 | ||
- | 1 | 23 Days | Standard | 23 | 40 | 1 ～ 9 | 116 ～ 1500 | Normal | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 35 | 50 | 8 | 60 | 7 | 48 | 103 | Tapped Hole | - | 8 | 78.6 | ||
- | 1 | 23 Days | Standard | 23 | 40 | 1 ～ 9 | 116 ～ 1500 | Light Preload / Medium Preload | Standard Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 35 | 50 | 8 | 60 | 7 | 48 | 103 | Tapped Hole | - | 8 | 78.6 | ||
- | 1 | 23 Days | Standard | 23 | 40 | 1 ～ 9 | 116 ～ 1500 | Light Preload / Medium Preload | High Grade / Precision Grade / High Precision Grade / Extra High Precision Grade | 25 | 27200 | 45900 | 529 | 529 | 459 | 35 | 50 | 8 | 60 | 7 | 48 | 103 | Tapped Hole | - | 8 | 78.6 |
Loading...
Basic information
| Set / Single Item | Set | Rail Type | Standard | Material | Stainless Steel |
|---|---|---|---|---|---|
| Ball Arrangement | 4-Row, Circular | Retainer | N/A | Lubrication System | Lubrication Applied |
| Rolling Element | Ball | Number of block mounting holes(holes) | 4 |
Configure
Basic Attributes
-
Block Type
-
Standard -
Wide
-
-
Rail Width W1(mm)
-
Mounting Height M(mm)
-
The number of LM blocks combined with a axis
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
-
Rail Length L(mm)
-
Radial Clearance
- Normal
- Light Preload
- Medium Preload
-
Accuracy Grade
- Standard Grade
- High Grade
- Precision Grade
- High Precision Grade
- Extra High Precision Grade
-
Nominal Part Number
-
Block Mounting Hole Pitch (Width Direction)(mm)
-
Block Mounting Hole Pitch (Length Direction)(mm)
-
Block Mounting Hole Diameter
-
Rail Mounting Hole Pitch(mm)
-
Rail Mounting Hole Diameter
-
Block external dimension W(mm)
-
Block external dimension L(mm)
-
Mounting hole for blocks
- Drilled Hole
- Tapped Hole
-
Mounting Hole Dimension H(ø)
-
Mounting Hole Screw Depth(mm)
-
Block dimension L1(mm)
-
Type
- HSR-M1A
- HSR-M1B
- HSR-M1LA
- HSR-M1LB
- HSR-M1LR
- HSR-M1R
- HSR-M1YR
-
Filter by CAD data type
- 2D
Filter by standard shipping days
-
- All
- 19 Days or Less
- 22 Days or Less
- 23 Days or Less
- 44 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.