Linear guideway carriages / large carriage, carriage dimensions selectable / material selectable / recirculating ball bearing / HSR
- Volume Discount
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Block Type | Material | Nominal Part Number | Block Mounting Hole Pitch (Width Direction) (mm) | Block Mounting Hole Pitch (Length Direction) (mm) | Block Mounting Hole Diameter | Rail Mounting Hole Pitch (mm) | Rail Mounting Hole Diameter | Block external dimension W (mm) | Block external dimension L (mm) | Mounting hole for blocks | Mounting Hole Dimension S (M) | Mounting Hole Dimension H (ø) | Mounting Hole Screw Depth (mm) | Block dimension L1 (mm) | Symbols for Dust Resistance | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
64.07 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 15 | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 56.6 | Drilled Hole | - | 4.5 | Through | 38.8 | NA | |
70.12 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 15 | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 56.6 | Drilled Hole | - | 4.5 | Through | 38.8 | End seal | |
64.07 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 15 | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Hole | M4 | - | 5 | 38.8 | NA | |
170.45 € | 1 | Available | 19 Days | 10 | Standard | Stainless Steel | 15 | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Hole | M4 | - | 5 | 38.8 | NA | |
73.44 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 15 | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Hole | M4 | - | 5 | 38.8 | Seal (end+side+inner) | |
184.84 € | 1 | Available | 19 Days | 10 | Standard | Stainless Steel | 15 | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Hole | M4 | - | 5 | 38.8 | Seal (end+side+inner) | |
70.12 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 15 | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Hole | M4 | - | 5 | 38.8 | End seal | |
179.77 € | 1 | Available | 19 Days | 10 | Standard | Stainless Steel | 15 | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Hole | M4 | - | 5 | 38.8 | End seal | |
73.37 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 20 | 53 | 40 | 6 | 60 | 4.5 | 63 | 74 | Drilled Hole | - | 6 | Through | 50.8 | NA | |
79.42 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 20 | 53 | 40 | 6 | 60 | 4.5 | 63 | 74 | Drilled Hole | - | 6 | Through | 50.8 | End seal | |
88.12 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 20 | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Tapped Hole | M6 | - | Through | 66.8 | NA | |
97.49 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 20 | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Tapped Hole | M6 | - | Through | 66.8 | Seal (end+side+inner) | |
94.17 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 20 | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Tapped Hole | M6 | - | Through | 66.8 | End seal | |
88.12 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 20 | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Drilled Hole | - | 6 | Through | 66.8 | NA | |
97.49 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 20 | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Drilled Hole | - | 6 | Through | 66.8 | Seal (end+side+inner) | |
94.17 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 20 | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Drilled Hole | - | 6 | Through | 66.8 | End seal | |
88.12 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 20 | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Hole | M5 | - | 6 | 66.8 | NA | |
243.00 € | 1 | Available | 22 Days | 10 | Standard | Stainless Steel | 20 | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Hole | M5 | - | 6 | 66.8 | NA | |
97.49 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 20 | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Hole | M5 | - | 6 | 66.8 | Seal (end+side+inner) | |
257.39 € | 1 | Available | 22 Days | 10 | Standard | Stainless Steel | 20 | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Hole | M5 | - | 6 | 66.8 | Seal (end+side+inner) | |
94.17 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 20 | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Hole | M5 | - | 6 | 66.8 | End seal | |
229.77 € | 1 | Available | 22 Days | 10 | Standard | Stainless Steel | 20 | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Hole | M5 | - | 6 | 66.8 | End seal | |
73.37 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 20 | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Hole | M5 | - | 6 | 50.8 | NA | |
203.37 € | 1 | Available | 22 Days | 10 | Standard | Stainless Steel | 20 | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Hole | M5 | - | 6 | 50.8 | NA | |
82.74 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 20 | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Hole | M5 | - | 6 | 50.8 | Seal (end+side+inner) | |
217.75 € | 1 | Available | 22 Days | 10 | Standard | Stainless Steel | 20 | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Hole | M5 | - | 6 | 50.8 | Seal (end+side+inner) | |
79.42 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 20 | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Hole | M5 | - | 6 | 50.8 | End seal | |
193.38 € | 1 | Available | 22 Days | 10 | Standard | Stainless Steel | 20 | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Hole | M5 | - | 6 | 50.8 | End seal | |
102.42 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 25 | 57 | 45 | 7 | 60 | 7 | 70 | 83.1 | Drilled Hole | - | 7 | Through | 59.5 | Seal (end+side+inner) | |
94.19 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 25 | 57 | 45 | 7 | 60 | 7 | 70 | 83.1 | Drilled Hole | - | 7 | Through | 59.5 | End seal | |
103.47 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 25 | 57 | 45 | 8 | 60 | 7 | 70 | 102.2 | Tapped Hole | M8 | - | Through | 78.6 | NA | |
122.67 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 25 | 57 | 45 | 8 | 60 | 7 | 70 | 102.2 | Tapped Hole | M8 | - | Through | 78.6 | Seal (end+side+inner) | |
114.44 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 25 | 57 | 45 | 8 | 60 | 7 | 70 | 102.2 | Tapped Hole | M8 | - | Through | 78.6 | End seal | |
103.47 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 25 | 57 | 45 | 7 | 60 | 7 | 70 | 102.2 | Drilled Hole | - | 7 | Through | 78.6 | NA | |
122.67 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 25 | 57 | 45 | 7 | 60 | 7 | 70 | 102.2 | Drilled Hole | - | 7 | Through | 78.6 | Seal (end+side+inner) | |
114.44 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 25 | 57 | 45 | 7 | 60 | 7 | 70 | 102.2 | Drilled Hole | - | 7 | Through | 78.6 | End seal | |
103.47 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 25 | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Hole | M6 | - | 8 | 78.6 | NA | |
277.60 € | 1 | Available | 23 Days | 10 | Standard | Stainless Steel | 25 | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Hole | M6 | - | 8 | 78.6 | NA | |
122.67 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 25 | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Hole | M6 | - | 8 | 78.6 | Seal (end+side+inner) | |
307.17 € | 1 | Available | 23 Days | 10 | Standard | Stainless Steel | 25 | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Hole | M6 | - | 8 | 78.6 | Seal (end+side+inner) | |
114.44 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 25 | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Hole | M6 | - | 8 | 78.6 | End seal | |
267.28 € | 1 | Available | 23 Days | 10 | Standard | Stainless Steel | 25 | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Hole | M6 | - | 8 | 78.6 | End seal | |
85.97 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 25 | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Hole | M6 | - | 8 | 59.5 | NA | |
230.37 € | 1 | Available | 23 Days | 10 | Standard | Stainless Steel | 25 | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Hole | M6 | - | 8 | 59.5 | NA | |
105.17 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 25 | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Hole | M6 | - | 8 | 59.5 | Seal (end+side+inner) | |
259.94 € | 1 | Available | 23 Days | 10 | Standard | Stainless Steel | 25 | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Hole | M6 | - | 8 | 59.5 | Seal (end+side+inner) | |
96.94 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 25 | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Hole | M6 | - | 8 | 59.5 | End seal | |
225.06 € | 1 | Available | 23 Days | 10 | Standard | Stainless Steel | 25 | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Hole | M6 | - | 8 | 59.5 | End seal | |
102.39 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 30 | 72 | 52 | 10 | 80 | 9 | 90 | 98 | Tapped Hole | M10 | - | Through | 70.4 | NA | |
125.42 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 30 | 72 | 52 | 10 | 80 | 9 | 90 | 98 | Tapped Hole | M10 | - | Through | 70.4 | Seal (end+side+inner) | |
115.57 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 30 | 72 | 52 | 10 | 80 | 9 | 90 | 98 | Tapped Hole | M10 | - | Through | 70.4 | End seal | |
98.55 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 30 | 72 | 52 | 9 | 80 | 9 | 90 | 98 | Drilled Hole | - | 9 | Through | 70.4 | NA | |
121.59 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 30 | 72 | 52 | 9 | 80 | 9 | 90 | 98 | Drilled Hole | - | 9 | Through | 70.4 | Seal (end+side+inner) | |
111.74 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 30 | 72 | 52 | 9 | 80 | 9 | 90 | 98 | Drilled Hole | - | 9 | Through | 70.4 | End seal | |
122.07 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 30 | 72 | 52 | 10 | 80 | 9 | 90 | 120.6 | Tapped Hole | M10 | - | Through | 93 | NA | |
135.25 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 30 | 72 | 52 | 10 | 80 | 9 | 90 | 120.6 | Tapped Hole | M10 | - | Through | 93 | End seal | |
122.07 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 30 | 72 | 52 | 9 | 80 | 9 | 90 | 120.6 | Drilled Hole | - | 9 | Through | 93 | NA | |
145.10 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 30 | 72 | 52 | 9 | 80 | 9 | 90 | 120.6 | Drilled Hole | - | 9 | Through | 93 | Seal (end+side+inner) | |
135.25 € | 1 | Available | 5 Days | 10 | Wide | Carbon steel | 30 | 72 | 52 | 9 | 80 | 9 | 90 | 120.6 | Drilled Hole | - | 9 | Through | 93 | End seal | |
122.07 € | 1 | Available | 5 Days | 10 | Standard | Carbon steel | 30 | 40 | 60 | 8 | 80 | 9 | 60 | 120.6 | Tapped Hole | M8 | - | 10 | 93 | NA |
Loading...
Basic information
| Set / Single Item | Block only | Rail Type | Standard | The number of LM blocks combined with a axis | 1 |
|---|---|---|---|---|---|
| Radial Clearance | Normal | Accuracy Grade | Standard Grade | Ball Arrangement | 4-Row, Circular |
| Retainer | N/A | Lubrication System | N/A | Rolling Element | Ball |
| Number of block mounting holes(holes) | 4 |
Configure
Basic Attributes
-
Block Type
-
Standard -
Wide
-
-
Material
- Carbon steel
- Stainless Steel
-
Nominal Part Number
-
Block Mounting Hole Pitch (Width Direction)(mm)
-
Block Mounting Hole Pitch (Length Direction)(mm)
-
Block Mounting Hole Diameter
-
Rail Mounting Hole Pitch(mm)
-
Rail Mounting Hole Diameter
-
Block external dimension W(mm)
-
Block external dimension L(mm)
-
Mounting hole for blocks
- Drilled Hole
- Tapped Hole
-
Mounting Hole Dimension S(M)
- M4
- M5
- M6
- M8
- M10
-
Mounting Hole Dimension H(ø)
-
Mounting Hole Screw Depth(mm)
-
Block dimension L1(mm)
-
Symbols for Dust Resistance
- End seal
- NA
- Seal (end+side+inner)
-
Type
- HSR-A
- HSR-B
- HSR-LA
- HSR-LB
- HSR-LR
- HSR-LRM
- HSR-R
- HSR-RM
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 5 Days or Less
- 19 Days or Less
- 22 Days or Less
- 23 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.