Sub-Part Clamp

Sub-Part Clamp
The sub-part clamp and the sub-part stop enable workpieces to be clamped on the front face. This allows the full area of the machine table to be used to clamp the workpiece.
- down-hold effect through an angled jaw face
- clamping of large workpieces on the whole of the machine table
- large clamping forces of up to 20 kN
- solid version made of vibration-eliminating ductile iron
- optimal adaption to the workpiece and material through the use of clamping inserts and interchangeable jaws
- force closure is possible with a fixed slot tenon EH 23110. in a T-slot
- minimum interference of clamping areas - even for large workpieces
- location holes at the sides for fastening of longitudinal stops if required

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

 

Example

 

Example 2

Part Number
23211.0010
23211.0020
Part NumberRelated to
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHS

781.01 €

1 3 Days 10

335.24 €

1 3 Days 10

Loading...

  1. 1

Basic information

Material Ductile cast iron Type Side Push Tightening torque max.(Nm) 50
Clamping force(kN) 20 Conflict Minerals free yes REACH compliant yes

Tech Support