CY3R, Magnetically Coupled Rodless Cylinder (with Switch Rail)
- Promotional pricing ends 31/12/2024
[Features]
· A further upgrade from the CY1 series
· The installation dimensions are the same as the CY1 series, yet it features improved bearing performance and reduced sliding resistance.
· NPT screws and G screws are standardized
(i)Remark
- Product pictures are representations. CAD data is not supported by some of the model numbers.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Drawing
Both sides piping type: ⌀6 (diameter 6 mm) Up to ⌀63 (Diameter 63 mm)
Note 1) ⌀50 (diameter 50 mm) and ⌀63 (diameter 63 mm) are L (-0.2 to 0).
Product Specifications
Product Image
Specifications
| Bore size (mm) | 6 | 10 | 15 | 20 | 25 | 32 | 40 | 50 | 63 |
|---|---|---|---|---|---|---|---|---|---|
| Fluid | Air | ||||||||
| Proof Pressure | 1.05 MPa | ||||||||
| Maximum operating pressure | 0.7 MPa | ||||||||
| Minimum operating pressure | 0.16 | 0.16 | 0.16 | 0.16 | 0.15 | 0.14 | 0.12 | 0.12 | 0.12 |
| Ambient and fluid temperature | -10°C to 60°C (no freezing) | ||||||||
| Note) Piston speed | 50 to 500 mm/s | ||||||||
| Cushion | Rubber bumper | ||||||||
| Lubrication | Not required (non-lubricated) | ||||||||
| Stroke length tolerance (mm) | 0 to 250 st: (0 to +1.0), 251 to 1,000 st: (0 to +1.4), 1,001 st and above: (0 to +1.8) | ||||||||
| Mounting methods | Direct mount type | ||||||||
| Mounting orientation | Horizontal, inclined, verticalNote2) | ||||||||
| Magnetic holding force (N) | 19.6 | 53.9 | 137 | 231 | 363 | 588 | 922 | 1,471 | 2,256 |
Note 1) if the auto switch is installed and the auto switch is set at the intermediate position, the maximum piston speed should be within 300 mm/s due to the relay etc.
Note 2) in the case of vertical mounting, intermediate stop by the pneumatic circuit is not possible.
Applicable auto switches
| Auto Switch Unit Part Number | Type | Special Functions | Electrical Entry | Indicator light | Wiring (Output) | Load voltage | ||
|---|---|---|---|---|---|---|---|---|
| DC | AC | |||||||
| M9N | Solid State Auto Switch | — | Grommet | Yes | 3-wire (NPN) | 24 V | 5 V, 12 V | — |
| M9P | 3-wire (PNP) | |||||||
| M9B | 2-wire | 12 V | ||||||
| M9NW | Diagnostic indication (2-color indicator) | 3-wire (NPN) | 5 V, 12 V | |||||
| M9PW | 3-wire (PNP) | |||||||
| M9BW | 2-wire | 12 V | ||||||
| * 1M9NA | Water-resistant (2-color indicator) | 3-wire (NPN) | 5 V, 12 V | |||||
| * 1M9PA | 3-wire (PNP) | |||||||
| * 1M9BA | 2-wire | 12 V | ||||||
| A96 | Reed type auto switch | — | Grommet | Yes | 3-wire (NPN equivalent) | — | 5 V | — |
| A93 | 2-wire | 24 V | 5 V, 12 V | 100 V | ||||
| A90 | No | 100 V or less | ||||||
| Auto Switch Unit Part Number | Lead Wire Length (m) | Pre-Wired Connector | Applicable load | ||||
|---|---|---|---|---|---|---|---|
| 0.5 (Nil) | 1 (M) | 3 (L) | 5 (Z) | ||||
| M9N | ● | ● | ● | ○ | ○ | IC circuit | Relay, PLC |
| M9P | ● | ● | ● | ○ | ○ | ||
| M9B | ● | ● | ● | ○ | ○ | — | |
| M9NW | ● | ● | ● | ○ | ○ | IC circuit | |
| M9PW | ● | ● | ● | ○ | ○ | ||
| M9BW | ● | ● | ● | ○ | ○ | — | |
| * 1M9NA | ○ | ○ | ● | ○ | ○ | IC circuit | |
| * 1M9PA | ○ | ○ | ● | ○ | ○ | ||
| * 1M9BA | ○ | ○ | ● | ○ | ○ | — | |
| A96 | ● | — | ● | — | — | IC circuit | — |
| A93 | ● | ● | ● | ● | — | Relay, PLC | |
| A90 | ● | — | ● | — | — | — | |
- * 1The water resistant type auto switch can be mounted on the above models, but it does not guarantee the water-resistant performance of the product. Check with the manufacturer regarding water-resistant types for the above model numbers.
- * Lead wire length symbol 0.5 m··No symbol (example) M9NW/1 m: M (example) M9NWM/3 m: L (example) M9NWL/5 m: Z (example) M9NWZ
- *Solid state auto switches marked with ○ are produced to order.
- *Auto switches are shipped together (but not assembled).
Diagram Examples
Both sides piping type
Components
| Number | Part Name | Material | Notes | ||
|---|---|---|---|---|---|
| 1 | Body | Aluminum alloy | Hard anodized | ||
| 2a | End cover A | Aluminum alloy | — | ||
| 2b | End cover C | Aluminum alloy | — | ||
| 3a | End cover B | Aluminum alloy | — | ||
| 3b | End cover D | Aluminum alloy | — | ||
| 4 | Cylinder tube | Stainless steel | — | ||
| 5 | Piston | ø6 (diameter 6 mm) | Brass | ø6 (diameter 6 mm) | Electroless nickel plating |
| ⌀10 to 63 (Diameter 10-63 mm) | Aluminum alloy | ⌀10 to 63 (Diameter 10-63 mm) | Chromated | ||
| 6 | Shaft | Stainless steel | — | ||
| 7 | Piston-side yoke | Rolled steel plate | Zinc chromated | ||
| 8 | External slider side yoke | Rolled steel plate | Zinc chromated | ||
| 9 | Magnet A | — | — | ||
| 10 | Magnet B | — | — | ||
| 11 | Spacer | Aluminum alloy | ⌀6 (diameter 6 mm) None | ||
| 12 | Bumper | Urethane rubber | — | ||
| 13 | Piston Nut | Carbon steel | Zinc chromated (⌀6-15 (diameter 6-15 mm) none) | ||
| 14 | Type C retaining ring for hole | Carbon tool steel | Phosphate Coated | ||
| 15 | Attachment ring | Aluminum alloy | Chromated | ||
| 16 | Type C retaining ring for shaft | High carbon steel wire material | — | ||
| 17 | Magnetic shielding plate | Rolled steel plate | Bright chromated (without ø6 (diameter: 6 mm), ø10 (diameter: 10 mm)) | ||
| 18a | Switch rail (both sides piping) | Aluminum alloy | White anodized | ||
| 18b | Switch rail (Centralized piping) | Aluminum alloy | White anodized | ||
| 19 | Magnet | — | — | ||
| 20 | Hexagon socket head plug | Chromium steel | Nickel plated | ||
| 21 | Steel ball | Chromium steel | ⌀40 (Diameter 40 mm) | Hexagon socket head plug | |
| ⌀20 (diameter 20 mm), ⌀50 (diameter 50 mm), ⌀63 (Diameter 63 mm) | None | ||||
| 22 | Hex socket head screw | Chromium steel | Nickel plated | ||
| 23 | Hex socket head set screw | Chromium steel | Nickel plated | ||
| 24 | Cylinder tube gasket | NBR | — | ||
| 25 | Wear ring A | Special resin | ⌀6 (diameter 6 mm): not available | ||
| 26 | Wear ring B | Special resin | — | ||
| 27 | Wear ring C | Special resin | — | ||
| 28 | Piston seal | NBR | — | ||
| 29 | Lubretainer | Special resin | ⌀6 (diameter 6 mm): not available | ||
| 30 | Switch rail gasket | NBR | Both sides piping: None | ||
Specification Table
| Model | A | B | C | CB | CR | D | F | G | GP | GW | H | HA | HB | HC | HP | HR | HS | HT | J × E |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CY3R6 | 7* | -* | -* | 2 | 0.5 | 7.6 | 5.5 | 3* | 20 | 18.5 | 19 | 17 | 10.5 | 18 | 10.5* | 17 | 6 | 10.5* | M4 × 0.7 × 6 |
| CY3R10 | 9 | 6.5 | 3.2 | 2 | 0.5 | 12 | 6.5 | 4 | 27 | 25.5 | 26 | 24 | 14 | 25 | 14 | 24 | 5 | 14 | M4 × 0.7 × 6 |
| CY3R15 | 10.5 | 8 | 4.2 | 2 | 0.5 | 16.6* | 8 | 5 | 33 | 31.5 | 32 | 30 | 17 | 31 | 17 | 30 | 8.5 | 17 | M5 × 0.8 × 7 |
| CY3R20 | 9 | 9.5 | 5.2 | 3 | 1 | 21.6* | 9 | 6 | 39 | 37.5 | 39 | 36 | 21 | 38 | 24 | 36 | 7.5 | 24 | M6 × 1 × 8 |
| CY3R25 | 8.5 | 9.5 | 5.2 | 3 | 1 | 26.4* | 8.5 | 6 | 44 | 42.5 | 44 | 41 | 23.5 | 43 | 23.5 | 41 | 6.5 | 23.5 | M6 × 1 × 8 |
| CY3R32 | 10.5 | 11 | 6.5 | 3 | 1.5 | 33.6* | 10.5 | 7 | 55 | 53.5 | 55 | 52 | 29 | 54 | 29 | 51 | 7 | 29 | M8 × 1.25 × 10 |
| CY3R40 | 10 | 11 | 6.5 | 5 | 2 | 41.6* | 13 | 7 | 65 | 63.5 | 67 | 62 | 36 | 66 | 36 | 62 | 8 | 36 | M8 × 1.25 × 10 |
| CY3R50 | 14 | 14 | 8.2 | 5 | 2 | 52.4* | 17 | 8.5 | 83 | 81.5 | 85 | 80 | 45 | 84 | 45 | 80 | 9 | 45 | M10 × 1.5 × 15 |
| CY3R63 | 15 | 14 | 8.2 | 5 | 3 | 65.4* | 18 | 8.5 | 95 | 93.5 | 97 | 92 | 51 | 96 | 51 | 90 | 9.5 | 51 | M10 × 1.5 × 15 |
| Model | K | L | LD | M | MM | N | PW | Q | QW | T | TC | W | WP | WS | X | Y | Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CY3R6 | 7 | 34 | 3.5 | 3.5 | M3 × 0.5 | 3.5 | 19 | 60* | 10 | 14.5* | 10.5 | 20 | 9.5 | 6 | 10 | 35.5 | 66* |
| CY3R10 | 9 | 38 | 3.5 | 4 | M3 × 0.5 | 4.5 | 26 | 68 | 14 | 17.5 | 14 | 20 | 13 | 8 | 15 | 39.5 | 76 |
| CY3R15 | 14 | 53 | 4.3 | 5 | M4 × 0.7 | 6 | 32 | 84 | 18 | 19 | 17 | 25 | 16 | 7 | 18 | 54.5 | 94 |
| CY3R20 | 11 | 62 | 5.4 | 5 | M4 × 0.7 | 7 | 38 | 95 | 17 | 20.5 | 20 | 40 | 19 | 7 | 22 | 64 | 107 |
| CY3R25 | 15 | 70 | 5.4 | 6 | M5 × 0.8 | 6.5 | 43 | 105 | 20 | 21.5 | 22.5 | 40 | 21.5 | 7 | 28 | 72 | 117 |
| CY3R32 | 13 | 76 | 7 | 7 | M6 × 1 | 8.5 | 54 | 116 | 26 | 24 | 28 | 50 | 27 | 7 | 35 | 79 | 130 |
| CY3R40 | 15 | 90 | 7 | 8 | M6 × 1 | 11 | 64 | 134 | 34 | 26 | 33 | 60 | 32 | 7 | 40 | 93 | 148 |
| CY3R50 | 25 | 110 | 8.6 | 10 | M8 × 1.25 | 15 | 82 | 159 | 48 | 30 | 42 | 60 | 41 | 10 | 50 | 113 | 176 |
| CY3R63 | 24 | 118 | 8.6 | 10 | M8 × 1.25 | 16 | 94 | 171 | 60 | 32 | 48 | 70 | 47 | 10 | 60 | 121 | 188 |
| Model | P (piping port) | ||
|---|---|---|---|
| Blank | TN* | TF* | |
| CY3R6 | M3 × 0.5* | — | — |
| CY3R10 | M5 × 0.8 | — | — |
| CY3R15 | M5 × 0.8 | — | — |
| CY3R20 | Rc 1/8 | NPT1/8 | G1/8 |
| CY3R25 | Rc 1/8 | NPT1/8 | G1/8 |
| CY3R32 | Rc 1/8 | NPT1/8 | G1/8 |
| CY3R40 | Rc 1/4 | NPT1/4 | G1/4 |
| CY3R50 | Rc 1/4 | NPT1/4 | G1/4 |
| CY3R63 | Rc 1/4 | NPT1/4 | G1/4 |
*2) * The mark shows the dimensions different from the CY1R series.
Selection support information
Model Number Notation
Model number examples
Part Number
|
|---|
| CY3R32-1700 |
| CY3R40-1700 |
| CY3RG40-1700 |
| CY3RG40TF-1700 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Type | Stroke (mm) | Table Material | Maximum load weight (when horizontally mounted) (kg) | Max. Load Mass (kg) | Table Size Length L (mm) | Cylinder Inner Diameter (Ø) | Rodless Cylinder Joint Type | Usage Environment | Table Surface Treatment | Guide | Table Size Width W (mm) | Table Size Height H (mm) | Operating Pressure (MPa) | Piping Format | Port Screw Type | Cushion | Auto Switch | Lead Wire Length (m) | Number of Switches | Custom-made Specifications | End Block | Model | Stroke Adjustment Unit Symbol | Custom-made | Type | Applicable inner diameter of cylinder (ø) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1,062.26 € | 1 | 16 Days | Rodless Cylinder | 1,700 | [Aluminum] Aluminum Alloy | 1~4.9 | 1.5 | 76 | 32 | Magnetic | General Purpose | [Clear Anodize] Hard Anodized Aluminum | [Guideless] Direct Mount | 53.5 | 55 | - | Standard type | Rc | Rubber cushion | Yes | Magnet built-in | None | - | - | - | 0.14 to 0.7 | None | - | - | ||
1,272.11 € | 1 | 16 Days | Rodless Cylinder | 1,700 | [Aluminum] Aluminum Alloy | 1~4.9 | 2 | 90 | 40 | Magnetic | General Purpose | [Clear Anodize] Hard Anodized Aluminum | [Guideless] Direct Mount | 63.5 | 67 | - | Standard type | Rc | Rubber cushion | Yes | Magnet built-in | None | - | - | - | 0.12 to 0.7 | None | - | - | ||
1,274.10 € | 1 | 16 Days | Rodless Cylinder | 1,700 | [Aluminum] Aluminum Alloy | 1~4.9 | 2 | 90 | 40 | Magnetic | General Purpose | [Clear Anodize] Hard Anodized Aluminum | [Guideless] Direct Mount | 63.5 | 67 | - | Centralized piping type | Rc | Rubber cushion | Yes | Magnet built-in | None | - | - | - | 0.12 to 0.7 | None | - | - | ||
1,274.10 € | 1 | 16 Days | Rodless Cylinder | 1,700 | [Aluminum] Aluminum Alloy | 1~4.9 | 2 | 90 | 40 | Magnetic | General Purpose | [Clear Anodize] Hard Anodized Aluminum | [Guideless] Direct Mount | 63.5 | 67 | - | Centralized piping type | G | Rubber cushion | Yes | Magnet built-in | None | - | - | - | 0.12 to 0.7 | None | - | - |
Loading...
Configure
Basic Attributes
-
Type
- Rodless Cylinder
-
Table Material
- Aluminum
- Aluminum
-
Maximum load weight (when horizontally mounted)(kg)
-
Max. Load Mass(kg)
-
Table Size Length L(mm)
-
Cylinder Inner Diameter(Ø)
-
Rodless Cylinder Joint Type
- Magnetic
-
Usage Environment
- General Purpose
-
Table Surface Treatment
- Clear Anodize
- Clear Anodize
-
Guide
- Guideless
- Guideless
-
Table Size Width W(mm)
-
Table Size Height H(mm)
-
Operating Pressure(MPa)
-
Piping Format
-
Port Screw Type
- G
- M screw
- NPT
- Rc
-
Cushion
-
Auto Switch
-
Lead Wire Length(m)
- Magnet built-in
-
Number of Switches
-
Custom-made Specifications
- 0.5
- 1
- 3
- 5
-
End Block
- M8 3‑pin plug connector
- M8 4‑pin plug connector
- M12 4‑pin A cord (normal key) plug connector
- None
-
Model
- 1
- 2
- 3
- 4
-
Stroke Adjustment Unit Symbol
-
Custom-made
- CY1□6 compatible part specification
- Hard chrome plating on outer surface of cylinder tube
- High-speed specification rodless cylinder
- Hydro specification rodless cylinder
- None
- Rodless cylinder with floating joint
-
Type
- Cylinder
- Switch rail
-
Applicable inner diameter of cylinder(ø)
-
Type
- CY3R
- CYR
-
Stroke(mm)
- 1,000
- 1,050
- 1,100
- 1,200
- 1,300
- 1,500
- 1,700
- 1,800
- 1,900
- 2,000
- 30
- 35
- 50
- 55
- 60
- 65
- 70
- 75
- 80
- 85
- 90
- 100
- 105
- 110
- 115
- 120
- 125
- 130
- 132
- 134
- 135
- 139
- 140
- 142
- 145
- 147
- 150
- 155
- 160
- 165
- 170
- 175
- 178
- 180
- 185
- 190
- 200
- 205
- 210
- 215
- 220
- 225
- 230
- 235
- 240
- 241
- 245
- 250
- 253
- 255
- 260
- 265
- 270
- 275
- 280
- 290
- 295
- 300
- 305
- 310
- 320
- 325
- 326
- 330
- 340
- 345
- 350
- 360
- 365
- 370
- 375
- 380
- 390
- 400
- 410
- 415
- 420
- 425
- 430
- 435
- 440
- 445
- 450
- 455
- 460
- 465
- 470
- 475
- 480
- 486
- 487
- 490
- 500
- 510
- 512
- 520
- 525
- 530
- 533
- 540
- 545
- 550
- 560
- 570
- 575
- 580
- 585
- 590
- 600
- 606
- 610
- 620
- 625
- 630
- 635
- 640
- 641
- 645
- 650
- 660
- 670
- 672
- 680
- 690
- 700
- 704
- 710
- 720
- 725
- 730
- 745
- 750
- 760
- 770
- 775
- 780
- 790
- 800
- 810
- 820
- 830
- 840
- 845
- 850
- 870
- 900
- 915
- 950
- 970
- 980
- 1010
- 1020
- 1030
- 1060
- 1140
- 1150
- 1160
- 1220
- 1250
- 1325
- 1350
- 1362
- 1400
- 1420
- 1450
- 1460
- 1550
- 1600
- 1640
- 1650
- 1660
- 1725
- 1750
- 1822
- 1920
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 4 Days or Less
- 7 Days or Less
- 9 Days or Less
- 12 Days or Less
- 16 Days or Less
- 26 Days or Less
- 98 Days or Less
Optional Attributes
- Product pictures are representations. CAD data is not supported by some of the model numbers.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.