Open Guide Bush (5002041)
Product Details:
Manufacturer part number: 5002041
Brand: MAHR
Price: 81.74 €
Delivery time: 12 Days
Technical Data:
dw: 32 mm
d1: 40 mm
dB: 48 mm
L1: 50 mm
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
5002041
Open Guide Bush N 550
Product Information
Suitability
Open guide bush with tapered inside edges on both sides.
• Allows universal use.
• When used in combination with shaft diameter dw ISO-h3, preloading of the rotary stroke bearing is guaranteed.
• The ball cage can project out of the guide bush on both sides. This permits long stroke paths even with short guide bushes used in combination with long ball cages (note minimum contact length).
• Allows universal use.
• When used in combination with shaft diameter dw ISO-h3, preloading of the rotary stroke bearing is guaranteed.
• The ball cage can project out of the guide bush on both sides. This permits long stroke paths even with short guide bushes used in combination with long ball cages (note minimum contact length).
Features
• Guide bore diameter d1 is finely honed to ISO tolerance IT 3, Rz 0.5 – 1.5 μm depending on diameter.
• Roundness within 1/3 ISO-IT 3.
• Cylindricity within IT 1.
• Radial run-out of a shaft inserted under preloading is within 0.0005 mm.
• Tapered inside edges on both sides ensure smooth running.
• Outside diameter dB n4 with radial run-out error within IT 4, ground to guide bore diameter d1 lead-in taper on one side.
• See page 37-41 for instructions on installation and servicing.
• Roundness within 1/3 ISO-IT 3.
• Cylindricity within IT 1.
• Radial run-out of a shaft inserted under preloading is within 0.0005 mm.
• Tapered inside edges on both sides ensure smooth running.
• Outside diameter dB n4 with radial run-out error within IT 4, ground to guide bore diameter d1 lead-in taper on one side.
• See page 37-41 for instructions on installation and servicing.
Material
• Special roller bearing steel 100 Cr 6 (1.2067 or 1.3505)
• Carefully heat-treated, hardness rating HRC 60–64/HV 720–815
• Carefully heat-treated, hardness rating HRC 60–64/HV 720–815
Special designs
Other dimensions or designs based on workpiece drawings are available.
These can also be produced using stainless steel (1.4112).
These can also be produced using stainless steel (1.4112).
Order Information
Rotary stroke bearing consisting of:
| Guide bush N 550/dw/d1/l1 | Order No. 5002 . . . | |
| Ball cage N 501/dw/d1/l2 | Order No. 50010 . . | |
| or | ||
| Ball cage N 500/dw/d1/l2 | Order No. 50000 . . | |
| or | ||
| Ball cage N 511/dw/d1/l2 | Order No. 50011 . . |
Drawing
Specifications
| dw | d1 | dB | l1 | Order No. |
| 4 | 7 | 10 | 12 | 5002002 |
| 20 | 5002003 | |||
| 30 | 5002068 | |||
| 6 | 10 | 14 | 16 | 5002004 |
| 25 | 5002005 | |||
| 40 | 5002071 | |||
| 60 | 5002072 | |||
| 8 | 13 | 18 | 20 | 5002006 |
| 30 | 5002007 | |||
| 40 | 5002073 | |||
| 65 | 5002074 | |||
| 10 | 15 | 20 | 25 | 5002008 |
| 36 | 5002009 | |||
| 50 | 5002075 | |||
| 70 | 5002076 | |||
| 12 | 17 | 22 | 25 | 5002010 |
| 36 | 5002011 | |||
| 50 | 5002077 | |||
| 75 | 5002078 | |||
| 14 | 20 | 25 | 33 | 5002012 |
| 45 | 5002013 | |||
| 15 | 21 | 25 | 33 | 5002014 |
| 45 | 5002015 | |||
| 16 | 22 | 28 | 25 | 5002016 |
| 33 | 5002017 | |||
| 45 | 5002018 | |||
| 60 | 5002019 | |||
| 92 | 5002081 | |||
| 18 | 24 | 30 | 42 | 5002082 |
| 56 | 5002083 | |||
| 18 | 24 | 32 | 33 | 5002020 |
| 56 | 5002021 | |||
| 64 | 5002022 | |||
| 19 | 25 | 32 | 33 | 5002023 |
| 56 | 5002024 | |||
| 64 | 5002025 | |||
| 20 | 26 | 32 | 33 | 5002026 |
| 42 | 5002027 | |||
| 56 | 5002028 | |||
| 64 | 5002029 | |||
| 112 | 5002088 | |||
| 24 | 30 | 38 | 45 | 5002030 |
| 63 | 5002031 | |||
| 70 | 5002032 | |||
| 79 | 5002033 | |||
| 25 | 31 | 38 | 45 | 5002034 |
| 63 | 5002035 | |||
| 70 | 5002036 | |||
| 79 | 5002037 | |||
| 132 | 5002089 | |||
| 30 | 38 | 48 | 50 | 5002038 |
| 75 | 5002039 | |||
| 90 | 5002040 | |||
| 32 | 40 | 48 | 50 | 5002041 |
| 63 | 5002042 | |||
| 75 | 5002043 | |||
| 90 | 5002044 | |||
| 145 | 5002090 | |||
| 40 | 48 | 60 | 63 | 5002045 |
| 80 | 5002046 | |||
| 90 | 5002047 | |||
| 96 | 5002048 | |||
| 120 | 5002049 | |||
| 172 | 5002091 | |||
| 42 | 50 | 60 | 80 | 5002051 |
| 96 | 5002053 | |||
| 50 | 60 | 72 | 80 | 5002054 |
| 100 | 5002055 | |||
| 52 | 62 | 72 | 80 | 5002057 |
| 100 | 5002058 | |||
| 63 | 73 | 90 | 125 | 5002060 |
| 80 | 92 | 120 | 140 | 5002062 |
| 100 | 112 | 140 | 160 | 5002063 |
Open Guide Bush N 550 Mini Range
Product Information
Suitability
Open guide bush with tapered inside edges on both sides for use with Mini Range ball cage N 502.
• Minimal installation space when used with Mini Range ball cages N 502.
• Allows universal use.
• When used in combination with shaft diameter dw ISO-h3, preloading of the rotary stroke bearing is guaranteed.
• The ball cage can project out of the guide bush on both sides to permit longer stroke paths (note minimum contact length).
• Minimal installation space when used with Mini Range ball cages N 502.
• Allows universal use.
• When used in combination with shaft diameter dw ISO-h3, preloading of the rotary stroke bearing is guaranteed.
• The ball cage can project out of the guide bush on both sides to permit longer stroke paths (note minimum contact length).
Features
• Guide bore diameter d1 is finely honed to ISO tolerance IT 3, Rz 0.5 – 1.5 μm depending on diameter.
• Roundness within 1/3 ISO-IT 3.
• Cylindricity within IT 1.
• Radial run-out of a shaft inserted under preloading is within 0.0005 mm.
• Tapered inside edges on both sides ensure smooth running.
• Outside diameter dB n4 with radial run-out error within IT 4, ground to guide bore diameter d1, lead-in taper on one side.
• See page 37-41 for instructions on installation and servicing.
• Roundness within 1/3 ISO-IT 3.
• Cylindricity within IT 1.
• Radial run-out of a shaft inserted under preloading is within 0.0005 mm.
• Tapered inside edges on both sides ensure smooth running.
• Outside diameter dB n4 with radial run-out error within IT 4, ground to guide bore diameter d1, lead-in taper on one side.
• See page 37-41 for instructions on installation and servicing.
Material
• Special roller bearing steel 100 Cr 6 (1.2067 or 1.3505)
• Carefully heat-treated, hardness rating HRC 60–64/HV 720–815
• Carefully heat-treated, hardness rating HRC 60–64/HV 720–815
Special designs
Other dimensions or designs based on workpiece drawings are available.
These can also be produced using stainless steel (1.4112).
These can also be produced using stainless steel (1.4112).
Order Information
Rotary stroke bearing consisting of:
| Guide bush N 550/dw/d1/l1 | Order No. 5002 . . . | |
| Ball cage N 502/dw/d1/l2 | Order No. 50002 . . |
Drawing
Specifications
| dw | d1 | dB | l1 | Order No. |
| 2.5 | 4.1 | 6 | 10 | 5002092 |
| 12.5 | 5002093 | |||
| 15 | 5002094 | |||
| 3 | 5 | 7 | 12.5 | 5002064 |
| 15 | 5002079 | |||
| 20 | 5002065 | |||
| 4 | 6 | 8 | 15 | 5002066 |
| 25 | 5002067 | |||
| 5 | 7 | 10 | 12 | 5002002 |
| 20 | 5002003 | |||
| 30 | 5002068 | |||
| 6 | 8 | 11 | 12 | 5002080 |
| 20 | 5002069 | |||
| 35 | 5002070 | |||
| 8 | 10 | 14 | 16 | 5002004 |
| 25 | 5002005 | |||
| 40 | 5002071 | |||
| 60 | 5002072 | |||
| 10 | 13 | 18 | 20 | 5002006 |
| 30 | 5002007 | |||
| 40 | 5002073 | |||
| 65 | 5002074 | |||
| 12 | 15 | 20 | 25 | 5002008 |
| 36 | 5002009 | |||
| 50 | 5002075 | |||
| 70 | 5002076 | |||
| 14 | 17 | 22 | 25 | 5002010 |
| 36 | 5002011 | |||
| 50 | 5002077 | |||
| 75 | 5002078 | |||
| 16 | 20 | 25 | 33 | 5002012 |
| 45 | 5002013 | |||
| 18 | 22 | 28 | 25 | 5002016 |
| 33 | 5002017 | |||
| 45 | 5002018 | |||
| 60 | 5002019 | |||
| 92 | 5002081 | |||
| 20 | 24 | 30 | 42 | 5002082 |
| 56 | 5002083 | |||
| 22 | 26 | 32 | 33 | 5002026 |
| 42 | 5002027 | |||
| 56 | 5002028 | |||
| 64 | 5002029 | |||
| 112 | 5002088 |
Part Number
|
|---|
| 5002041 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | dw (mm) | d1 (mm) | dB (mm) | L1 (mm) | |
|---|---|---|---|---|---|---|---|---|
81.74 € | 1 | 12 Days | 32 | 40 | 48 | 50 |
Loading...
Basic information
| Sales Operation | Bushing |
|---|
Configure
Basic Attributes
-
dw(mm)
-
d1(mm)
-
dB(mm)
-
L1(mm)
-
Filter by CAD data type
- 3D
Filter by standard shipping days
-
- All
- 12 Days or Less
- 13 Days or Less
- 20 Days or Less
- 33 Days or Less
- 42 Days or Less
- 51 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.