Tooling blocks (K0809) (Part Numbers)
Material:
GJL 300
Version:
Support and mounting surfaces ground
Note:
Grid hole pitch 50 ±0,01 mm.
Tooling blocks can be used for mounting low workpieces or as small bases. They can also be used as parallel gauge blocks for inspection work.
Tooling blocks K0809.090121621 and K0809.090122126 mounted with shoulder screws K0815.112065.
Tooling blocks K0809.090161621 and K0809.090162126 mounted with shoulder screws K0815.16075.
GJL 300
Version:
Support and mounting surfaces ground
Note:
Grid hole pitch 50 ±0,01 mm.
Tooling blocks can be used for mounting low workpieces or as small bases. They can also be used as parallel gauge blocks for inspection work.
Tooling blocks K0809.090121621 and K0809.090122126 mounted with shoulder screws K0815.112065.
Tooling blocks K0809.090161621 and K0809.090162126 mounted with shoulder screws K0815.16075.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
K0809.090122126
- Product data
- CAD data not available
Basic information
| Main material | GJL300 | Thread A | M12 | Reamed hole A | 12 F7 |
|---|---|---|---|---|---|
| Number of fastening holes | 14 | Number of grid holes | 21 | Fastening hole | 12 F7 |
| C(mm) | 210 | D(mm) | 260 | E(mm) | 148 |
| Weight(kg) | 37 |
This page is Tooling blocks (K0809), part number K0809.090122126.
You can find the detail information about specifications and dimensions on part number K0809.090122126.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.