Thin jet-proof gallery (salt-resistant specification GTS-20W-ST). Grade IP55 (category 2)
Replace the filter from the front. The new 20 type with anti-salt specifications available for our popular thin and jet-proof gallery.
[Use]
- An air-permeable gallery for cubicles and switchboards
installed in environments prone to salt damage, such as coastal areas.
[Features]
- Greatly reduced depth while maintaining the same protection grade (IP45) as previous versions.
- The inner part shields the filter surface from exposure to the weather,
so rainwater will never affect filtration.
- Filter can be maintained from the front.
- A 160 mm square fan can be fitted to the rear face of the GTS-20W and GTS-45W. (Use for exhaust purposes.)
[Material specifications]
- Outer louver: SUS304, 1.5mm, painted with 5Y7/1 (semi-gloss)
- Inner louver: Polypropylene
- Salt filter: Salt filter (trapping efficiency: 90%)
- Filter case: SUS304, 1.2mm, painted with 5Y7/1
- Waterproof packing: CR sponge
- Outer louver mounting screw: SUS cross-recessed pan-head flat washer, nylon captive washer, M5 x 8
- Conical spring nut: SUS M6 x 8
[Use]
- An air-permeable gallery for cubicles and switchboards
installed in environments prone to salt damage, such as coastal areas.
[Features]
- Greatly reduced depth while maintaining the same protection grade (IP45) as previous versions.
- The inner part shields the filter surface from exposure to the weather,
so rainwater will never affect filtration.
- Filter can be maintained from the front.
- A 160 mm square fan can be fitted to the rear face of the GTS-20W and GTS-45W. (Use for exhaust purposes.)
[Material specifications]
- Outer louver: SUS304, 1.5mm, painted with 5Y7/1 (semi-gloss)
- Inner louver: Polypropylene
- Salt filter: Salt filter (trapping efficiency: 90%)
- Filter case: SUS304, 1.2mm, painted with 5Y7/1
- Waterproof packing: CR sponge
- Outer louver mounting screw: SUS cross-recessed pan-head flat washer, nylon captive washer, M5 x 8
- Conical spring nut: SUS M6 x 8
(i)Remark
- [Specification change notification]
A portion of the specifications of the GTS series will be changed.
For change contents and change timing, please read product details.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
GTS-20W-ST
Basic information
| Type | Low Profile Water Jet Protection Gallery | Standard | IP55 | Width x height x length(mm) | 55x250x250 |
|---|---|---|---|---|---|
| Replacement filter compatible model number | GTS20-FST |
This page is Thin jet-proof gallery (salt-resistant specification GTS-20W-ST). Grade IP55 (category 2), part number GTS-20W-ST.
You can find the detail information about specifications and dimensions on part number GTS-20W-ST.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| GTS-20W-ST-F1 |
| GTS-20W-ST-F2 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | Ventilation Fan | Fan specifications | Maximum wind speed (m3/min) | Note |
|---|---|---|---|---|---|---|---|---|---|
542.50 € | 1 | 8 Days | 10 | Included | AC100V 1 pc. | 1.63/ 1.85 | Included fan model number: 109-601 (Sanyo Electronics) | ||
542.50 € | 1 | 8 Days | 10 | Included | AC200 V 1 piece | 1.63/ 1.85 | Included fan model number: 109-602 (Sanyo Electronics) |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.