Cam Clamp Set
A cam-shaped handle allows tool-less tightening. The handle is in a low position, meaning there are no concerns about interference with the upper part.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
CC12M-100
Basic information
| A(mm) | 20 | B(mm) | 30 | C(mm) | 100 |
|---|---|---|---|---|---|
| D(mm) | M12×1.75 | E(mm) | 21 - 43 | F(mm) | 166 |
| G(mm) | 10 | Clamp Range H(mm) | 26 - 35 | J(mm) | 37 |
| K(mm) | 20 | L(mm) | 10 | M(mm) | 26.5 |
| N(mm) | 40 | O(mm) | 50 | P(mm) | 20 |
| Q(mm) | 6.5 | I (with α)(mm) | 1 | I (with β)(mm) | 4 |
| Tightening Force(kN) | 12 | Mass(kg) | 1 | Material | S45C |
| Heat Treatment | Hardening | Surface Treatment | Black oxide finish |
This page is Cam Clamp Set, part number CC12M-100.
You can find the detail information about specifications and dimensions on part number CC12M-100.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.