- Due to a temporary system error, the displayed tracking information within the online ordering system are currently wrong. Please track the displayed tracking number as follows. For shipments within Germany please track with GLS. For shipments to all other European countries, please track with TNT / FedEX. We are sorry for the inconvenience caused.
- Important notice: Due to COVID-19 our costs for importing products to Europe have increased tremendously. Therefore, an additional freight cost surcharge of 11.50 Euros per delivery will be invoiced from May 1st, 2020 temporally. Find further information here.
Ceramic Adjustment Screwdriver DA-48 – 52 (DA-52)
- Volume Discount
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties.
· Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)
· Pencil-type portable design with caps for protecting tip.
[Applications]
· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.
· For work related to wireless devices, computers and communications.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
DA-52
| Part Number |
|---|
| DA-52 |
| Part Number | Standard Unit Price | Volume Discount | Shipping Days? | RoHS | Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Tip size / flathead (-) blade thickness (mm) B2 | Tip Size | Opposite Side (mm) | Bit Length (mm) | Grip diameter (mm) | Material | Features | RoHS | Caution |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
22.87 € | Available | 4 Days | 10 | Flathead (-) | - | 1.3 ～ 2.5 | 0.4 ～ 0.7 | - | 2/2.5 | 19/19 | φ8 | Tip: Zirconian Fine Ceramic | Perfect non-conductive tip for high frequency area adjustment. Ideal alignment screwdriver for board protection. Four-in-one double ended adjustable (tip minus bit shaft part hexagon) tool. Pencil-type easy to carry design with caps for protecting tip. With clip. | Corresponds To | Breakage may occur when used with 0.01 N·m or greater torques. Bit may break and fragment may be launched if dropped on a hard surface. |
Loading...
Basic information
| Single Product/Set Classification | Single Item | Shaft type | Round | Magnet | N/A |
|---|---|---|---|---|---|
| Shaft through | N/A | Bolster | N/A | Grip Type | Resin |
| Overall Length(mm) | 136 | Weight(g) | 8 |
This page is Ceramic Adjustment Screwdriver DA-48 – 52, part number DA-52.
You can find the detail information about specifications and dimensions on part number DA-52.
Configure
Narrow search by specifying spec./dim.
-
Tip size / Phillips (+)
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Tip size / flathead (-) blade thickness (mm) B2
-
Tip Size
- Positive: φ3
-
Type
- DA
-
Tip standards
- Flathead (-)
- Phillips (+)/Flathead(-)
-
Opposite Side(mm)
- 2/-
- 2/2.5
-
Bit Length(mm)
- 19/15
- 19/19
Narrow search by specifying lead time
-
- All
- 4 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| DA-48 |
| DA-50 |
| DA-51 |
| Part Number | Standard Unit Price | Volume Discount | Shipping Days? | RoHS | Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Tip size / flathead (-) blade thickness (mm) B2 | Tip Size | Opposite Side (mm) | Bit Length (mm) | Grip diameter (mm) | Material | Features | RoHS | Caution |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
22.87 € | Available | 4 Days | 10 | Flathead (-) | - | 1.3 ～ 2.4 | 0.4 ～ 0.7 | - | 2/2.5 | 19/19 | φ8 | Tip: Zirconian Fine Ceramic | Perfect non-conductive tip for high frequency area adjustment. Ideal alignment screwdriver for board protection. Four-in-one double ended adjustable (tip minus bit shaft part hexagon) tool. Pencil-type easy to carry design with caps for protecting tip. With clip. | Corresponds To | Breakage may occur when used with 0.01 N·m or greater torques. Bit may break and fragment may be launched if dropped on a hard surface. | |
22.87 € | Available | 4 Days | 10 | Phillips (+)/Flathead(-) | Other | 0.8 | 0.35 | Positive: φ3 | 2/- | 19/15 | φ8 | Tip: Zirconian Fine Ceramic | Perfect non-conductive tip for high frequency area adjustment. Ideal alignment screwdriver for board protection. Four-in-one double ended adjustable (tip minus bit shaft part hexagon) tool. Pencil-type easy to carry design with caps for protecting tip. With clip. | Corresponds To | Breakage may occur when used with 0.01 N·m or greater torques. Bit may break and fragment may be launched if dropped on a hard surface. | |
22.47 € | Available | 4 Days | 10 | Flathead (-) | - | 0.9 ～ 1.8 | 0.4 | - | 2/2.5 | 19/19 | φ8 | Tip: Zirconian Fine Ceramic | Perfect non-conductive tip for high frequency area adjustment. Ideal alignment screwdriver for board protection. Four-in-one double ended adjustable (tip minus bit shaft part hexagon) tool. Pencil-type easy to carry design with caps for protecting tip. With clip. | Corresponds To | Breakage may occur when used with 0.01 N·m or greater torques. Bit may break and fragment may be launched if dropped on a hard surface. |
Additional Products in this Category
- Compact Ratchet 52 (Straight Type)
- Box Screwdriver EA565A-8
- Hollow Shaft Box Screwdriver EA565BF-104
- Hollow Shaft Box Screwdriver EA565BF-13
- T-Type Hex Wrench EA573AB-3
- Hex Wrench [With Ball Point] EA573BR-2.5
- [Hexagon] T-Type Wrench Set EA573BX
- T-Type Hexagonal Key Wrench (With Ball Point) EA573TE-2.5
Customers Who Viewed This Item Also Viewed
Tech Support
Payment Method
Certificates
Copyright © MISUMI Corporation All Rights Reserved.
Please assist us in our effort to improve this site.
Please give us a feedback on the MISUMI e-Catalog.
Thank you for your cooperation.
If you wish to receive our response,please use the inquiry form.