Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVVNN
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| DVVNN3225P16 |
| DVVNN3232P16 |
| DVVNN4040S16 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Shank height (mm) | Shank width (mm) | Function Width (mm) | Function Height (mm) | Function Length (mm) | |
|---|---|---|---|---|---|---|---|---|---|
208.07 € | 1 | 8 Days | 32 | 25 | 13.1 | 32 | 170 | ||
256.74 € | 1 | 8 Days | 32 | 32 | 16.6 | 32 | 170 | ||
342.50 € | 1 | 8 Days | 40 | 40 | 20.6 | 40 | 250 |
Loading...
Basic information
| Applicable Tip Shape | V (35° Diamond-Shaped) | Application | Outer Diameter / Profiling / Chamfer / Post-Grinding | Clamp Shape | Cable clamp |
|---|---|---|---|---|---|
| Cutting Direction | No-hand | Applicable Tip Clearance Angle Type | Negative | Rake angle(°) | -4 |
| Blade Inclination Angle(°) | -13 | Lead Angle(°) | 17.5 | Cutting Angle(°) | 72.5 |
| Clearance angle(°) | 0 | Dimension L3(mm) | 47.8 | Tip Size | 16 |
| Gauge Chip | VNMG 16 04 08 | Torque(Nm) | 3 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.