- Due to a temporary system error, the displayed tracking information within the online ordering system are currently wrong. Please track the displayed tracking number as follows. For shipments within Germany please track with GLS. For shipments to all other European countries, please track with TNT / FedEX. We are sorry for the inconvenience caused.
- Important notice: Due to COVID-19 our costs for importing products to Europe have increased tremendously. Therefore, an additional freight cost surcharge of 11.50 Euros per delivery will be invoiced from May 1st, 2020 temporally. Find further information here.
Coromant Capto Cutting Head For Inner-Diameter Turning C-DTFNR/L
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
|---|
| C4-DTFNL-17090-16 |
| C4-DTFNR-17090-16 |
| C5-DTFNL-17090-16 |
| C5-DTFNR-17090-16 |
| Part Number | Standard Unit Price | Volume Discount | Shipping Days? | Cutting Direction | Dimension l3 (mm) | Rake angle γ (°) | Blade Inclination Angle λs (°) | Gauge Chip | D5m (mm) | Dimensions/D1 | Tip tightening torque (Nm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
328.22 € | 12 Days | Left-hand | 68 | -6 | -12 | TNMG 16 04 08 | 40 | 25 | 1.7 | ||
328.22 € | 12 Days | Right-hand | 68 | -6 | -12 | TNMG 16 04 08 | 40 | 25 | 1.7 | ||
367.48 € | 12 Days | Left-hand | 66 | -6 | -12 | TNMG 16 04 08 | 50 | 25 | 1.7 | ||
367.48 € | 12 Days | Right-hand | 66 | -6 | -12 | TNMG 16 04 08 | 50 | 25 | 1.7 |
Loading...
Basic information
| Applicable Tip Shape | T (Triangle) | Minimum Machining Diameter | 32 | Application | Internal Diameter |
|---|---|---|---|---|---|
| Clamp Shape | Cable clamp | Clearance angle | 0° | Lubrication Hole Y/N | Available |
| Specifications | CORO-TURN RC Double Clamp | Cutting Angle(°) | 91 | Tool Lead Angle(°) | -1 |
| Dimensions f1(mm) | 17 | Dimension L1(mm) | 90 | Tip Size(mm) | 16 |
| Tip Size iC | 41706 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- HA...PTFN16 Type (Internal Diameter Machining/Cutting with Oil Hole)
- S...PDUN11 Type (Profiling)
- Cartridge
- CoroTurn SL Coromant Capto Short 0° Type 570-R/LF-T
- Holder For Inner Diameter Machining, C-MBR
- SANDVIK CoroBore BR30 Three-Edge Rough Boring Tool
- SANDVIK Coromant Capto to CoroTurn SL70 Adaptor
- SANDVIK Slide for Duobore
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
Certificates
Copyright © MISUMI Corporation All Rights Reserved.
Please assist us in our effort to improve this site.
Please give us a feedback on the MISUMI e-Catalog.
Thank you for your cooperation.
If you wish to receive our response,please use the inquiry form.