- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Precision Snap Ring Pliers For Shaft 4931-A1 / A2
· Can simply mount/unmount snap rings for shaft.
· The tip is made of tough special spring steel.
· Can withstand high loads during extended use, and the tool's lifetime is 10 times greater than ordinary snap ring pliers.
· Uses a screw joint and can move very smoothly.
· Forged for increased hardness.
· The tip has a wide contact surface with the ring and can securely hold the ring without distortion.
· Can also work at narrow locations due to its slim head shape.
· The material is oil-quenched and tempered chromium-vanadium electric steel.
· Straight head
· Comes with a stopper and prevents excessive opening/loosening. (Simple adjustment with a set crew)
· The spring is built into and protected by the joint part.
(Note)
* Wear safety goggles when working.
· The tip is made of tough special spring steel.
· Can withstand high loads during extended use, and the tool's lifetime is 10 times greater than ordinary snap ring pliers.
· Uses a screw joint and can move very smoothly.
· Forged for increased hardness.
· The tip has a wide contact surface with the ring and can securely hold the ring without distortion.
· Can also work at narrow locations due to its slim head shape.
· The material is oil-quenched and tempered chromium-vanadium electric steel.
· Straight head
· Comes with a stopper and prevents excessive opening/loosening. (Simple adjustment with a set crew)
· The spring is built into and protected by the joint part.
(Note)
* Wear safety goggles when working.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Basic information
| Product Category | Pliers | Plier Type | Retaining Ring Pliers | Overall Length(mm) | 180 |
|---|---|---|---|---|---|
| Shaft/hole | For Shaft | Tip claw diameter(mm) | Tip diameter (ømm): 1.8 | Single Product/Set Classification | Single item |
| Mass(g) | 170 | Compatible shaft diameter(φ mm) | 19–60 | JAN Code | 4003773073901 |
| Trusco code | 479-3064 | Specifications | Head finish: gray anti-rust coat. Handle: plastic coating (anti-slip) |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.