Throw-Away Drill, 1 / 1.5 Series Holder, Morse Taper Shank
(i)Remark
- Use a holder and tip from the same series. Periodically replace the holder after the tip has been exchanged about 100 times.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| 22010S-003M |
| 22015S-003M |
| 23010H-003M |
| 23015H-003M |
| 24010H-003M |
| 24015H-003M |
| 25010H-003M |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Hole diameter (drill diameter) D (mm) | Overall Length L (mm) | |
|---|---|---|---|---|---|---|
340.56 € | 1 | 14 Days | 17.53 to 24.38 | 232.5 | ||
365.64 € | 1 | 14 Days | 21.83 to 24.38 | 232.5 | ||
391.39 € | 1 | 14 Days | 17.53 to 24.38 | 283.3 | ||
420.44 € | 1 | 14 Days | 21.83 to 24.38 | 283.3 | ||
391.39 € | 1 | 14 Days | 17.53 to 24.38 | 334.2 | ||
420.44 € | 1 | 14 Days | 21.83 to 24.38 | 334.2 | ||
432.97 € | 1 | 14 Days | 17.53 to 24.38 | 435.8 |
Loading...
Basic information
| Shank Type | Taper shank |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.