• Due to the typhoon in Japan/Tokyo, delivery delays may occur for some products. We apologize for any inconvenience and thank you for your understanding
  • For technical reasons, a credit card payment is temporarily not possible. We apologize for any inconvenience this may cause to you.

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.

(i)Remark

  • A flat part of about 0.1 to 0.2 mm remains on the tip due to the manufacturing process.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Number
AMVS2010-90
AMVS2015-90
AMVS2020-90
AMVS2025-90
AMVS2030-90
AMVS2040-90
AMVS2050-90
AMVS2060-90
AMVS2080-90
AMVS2100-90
AMVS2120-90
AMVS2160-90
AMVS2200-90
Part NumberStandard Unit PriceVolume DiscountShipping Days?Tool Diameter (D)
(mm)
Flute length
(mm)
Overall length
(mm)
Shank diameter
(mm)

112.69 €

4 Days 12404

112.69 €

4 Days 1.53404

112.69 €

4 Days 24404

112.69 €

4 Days 2.55404

108.04 €

4 Days 36506

108.04 €

4 Days 48506

132.44 €

4 Days 510608

132.44 €

4 Days 612708

147.54 €

4 Days 8168010

194.03 €

4 Days 10189012

225.57 €

4 Days 122010012

513.64 €

4 Days 163014516

705.72 €

4 Days 203516520

Loading...

  1. 1

Basic information

Application Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling Tip angle (θ) 90 work material general steel / Cast Iron / Aluminum
Single blade, two blades Single blade Tool Material Type Carbide Coating Y/N Available
Coating Type TiAlN Number of blades(pcs.) 2

Additional Products in this Category

Tech Support