Digital Indicator, Bore Gauge ID-C, Inch/Metric (Part Numbers)
It offers the following benefits:
- Minimum value holding function that allows you to easily detect a hole diameter.
- Analogue bar graph in the display (12 different scales switchable)
- The analogue bar graph enhances usability by adding a dial gauge “feel” to digital measurement.
- GO/±NG tolerance judgement function
- A fast measurement frequency mode(detection cycle 20ms or 50times/s) is selectable to measure in the peak detection mode more reliably.
- Easy indicator setup via a setup menu
- A USB interface box can be used to set up the indicator from PC via dedicated software.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| 543-311B-10 |
| 543-312B-10 |
| Part Number | Related to |
Standard Unit Price
| Minimum order quantity | Volume Discount | Additional Spec | Contact Point | Stem Diameter (mm) | Type | |
|---|---|---|---|---|---|---|---|---|---|
563.00 € | 1 | 5 Days | Flat Back Plate | Carbide ball, thread: M2.5x0.45 | 8 | EN ISO Standard | |||
563.00 € | 1 | 5 Days | ASME/ANSI Type, Flat Back Plate | Carbide ball, thread: No.4-48UNF | 9.52 | ASME/ANSI/AGD Standard |
Loading...
Basic information
| Alarm | Low voltage, ABS composition error, overflow error, setting error | Analog Bar Resolution Switchable | Yes | Counting Direction Switchable | Yes |
|---|---|---|---|---|---|
| DATA/HOLD | Yes | Digimatic Data Output | Yes | Digital Scale | Electrostatic capacitance type absolute linear encoder |
| Digital Step(mm) | 0.001 / 0.01 | Digital Step(inch) | 0.00005 / 0.0001 / 0.0005 | Digital/Analog | Digital |
| Fast Measurement Mode | Yes | Function lock | Yes | GO/±NG Judgement | Yes |
| H MPE (Hysteresis)(mm) | 0.002 | H MPE (Hysteresis)(inch) | 0.0001 | Inch/Metric Switchable | Yes |
| Inch-Metric | Inch/Metric | Max. Permissible Error E MPE (Total Range)(mm) | 0.003 | Max. Permissible Error E MPE (Total Range)(inch) | ±0.0001 |
| Max. Response Speed | Unlimited | Measurement Frequency (MAX/MIN/Range) | Standard mode: 10 times/s / fast mode: 50 times/s (plunger speed max. 50 µm/s for peak measurement) | Measuring Force MPL(N) | ≤1.5 |
| MIN Value Hold | Yes | ON/OFF | Yes | PRESET 3x | Yes |
| Protection | IP42 | R MPE (Repeatability)(mm) | 0.002 | R MPE (Repeatability)(inch) | 0.0001 |
| Range(mm) | 12.7 | Range(inch) | 0.5 | Display | LCD, character height 8 mm, 330° rotatable |
| Mass(g) | 170 | Power Supply | 1 battery CR2032 | Battery life | Standard mode: approx. 1 year fast mode: approx. 4.5 month |
Configure
Basic Attributes
-
Additional Spec
-
Contact Point
- Carbide ball, thread: No.4-48UNF
- Carbide ball, thread: M2.5x0.45
-
Stem Diameter(mm)
- 8
- 9.52
-
Type
- ASME/ANSI/AGD Standard
- EN ISO Standard
-
Type
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.