?* Information on days to ship

• 

  LED Lighting CLA

  PATLITE

  An LED featuring an IP69K protection grade and designed for machinery cleaning at food processing factories, etc.
  
  [Features]
  · 30% or more brighter than conventional products (CLB-N type 300lx to 400lx / 0.5 m. Compared to CLA3S type.)
  · In terms of waterproof performance, it meets IP69K standards (first in industry / in-house research) required for use at work sites in which 80°C high-pressure warm water washing is carried out, such as in the meat, food processing, pharmaceutical, and beverage industries. Also complies with IP66/67.
  · Temperature of heat generated by the product has been reduced to 40 degrees or less (34% reduction compared to 20W equivalent fluorescent lamps), and the burden on the installation environment has been reduced.
  · Seven sizes (100 to 1,500 mm), three colors (daylight, cool white, yellow), and four attachment types including magnet attachment are available.

  • Volume Discount

  CAD ：

  2D

  Starting from∗ ：	72.15 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  LED Lighting

  SHINOHARA ELECTRIC

  The popular LED lighting has become brighter and more compact.
  Achieves 1.5 times the brightness with 90% of the power consumption of conventional products.
  
  [Use]
  ● Please use for lighting purposes for panels such as power receiving and distributing panels, distribution boards, and control panels.
  [Features]
  ● Long life. Lasts five times longer than conventional fluorescent lighting.
  ● Energy saving. Power consumption is about half that of conventional fluorescent lighting.
  ● ECO. A clean light that does not use mercury.
  ● Low heat generation. Does not become hot and is safe like fluorescent lighting.
  ● Low ultraviolet rays. Since it hardly emits ultraviolet rays, pests are not attracted into the board or to its surroundings, and their intrusion can be prevented.
  ● Shock resistant. Because no glass is used, they are safe from impacts that occur during transport or installation.
  ● Compact. Featuring a simple design that is compact and lightweight and which can be easily installed to boards.
  ● Brighter. Realizes about 1.5 times the brightness of fluorescent lights (FL10W).
  ● The LED device used is made by Nichia Chemical Co., Ltd.
  ● Uses halogen-free type UL3385 electric wire.

  Starting from∗ ：	66.18 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  New Model LED Unit (Terminal Block Type)

  SHINOHARA ELECTRIC

  A unit that fits large panel boards and is twice the size of conventional products is now available.
  
  [Use]
  ● Please use for lighting purposes for panels such as power receiving and distributing panels, distribution boards, and control panels.
  [Features]
  ● Long life. Lasts five times longer than conventional fluorescent lighting.
  ● Energy saving. Power consumption is about half that of conventional fluorescent lighting.
  ● ECO. A clean light that does not use mercury.
  ● Low heat generation. Does not become hot and is safe like fluorescent lighting.
  ● Low ultraviolet rays. Since it hardly emits ultraviolet rays, pests are not attracted into the board or to its surroundings, and their intrusion can be prevented.
  ● Shock resistant. Because no glass is used, they are safe from impacts that occur during transport or installation.
  ● Brighter. Achieves 1.5 times the brightness with 90% of the power consumption of our conventional product (FL20W equivalent product).
  ● Labor saving. Since the relay terminal block for the power supply line is integrated with the metal fitting, labor savings can be achieved with wiring.
  ● Long size. With a long size equivalent to a 20W straight tube fluorescent lamp, illuminates inside the board more brightly.
  ● The LED device used is made by Nichia Chemical Co., Ltd.
  ● Uses halogen-free type UL3385 electric wire.

  • Volume Discount

  Starting from∗ ：	149.99 €
  Min. Shipping Days ：	25 Days

  *Unit price with basic configuration

• 

  LED Lighting (Long Size)

  SHINOHARA ELECTRIC

  A long size version of the popular CLED type is now available. Can be used for large panel boards and inspection passage lighting inside boards.
  
  [Use]
  ● Please use for lighting purposes for panels such as power receiving and distributing panels, distribution boards, and control panels.
  [Features]
  ● Long life. Lasts five times longer than conventional fluorescent lighting.
  ● Energy saving. Power consumption is about half that of conventional fluorescent lighting.
  ● ECO. A clean light that does not use mercury.
  ● Low heat generation. Does not become hot and is safe like fluorescent lighting.
  ● Low ultraviolet rays. Since it hardly emits ultraviolet rays, pests are not attracted into the board or to its surroundings, and their intrusion can be prevented.
  ● Shock resistant. Because no glass is used, they are safe from impacts that occur during transport or installation.
  ● Long size. With a long size equivalent to a 20W straight tube fluorescent lamp, illuminates inside the board more brightly.
  ● The LED device used is made by Nichia Chemical Co., Ltd.
  ● Uses halogen-free type UL3385 electric wire.

  Starting from∗ ：	85.22 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  LED Unit (Magnet Type for Maintenance and Inspections)

  SHINOHARA ELECTRIC

  Comes with a magnet sheet to enable easy removal.
  
  [Use]
  ● Please use for lighting during the maintenance and inspection of power receiving and distributing panels, distribution boards, and control panels, etc.
  [Features]
  ● Long life. Lasts five times longer than conventional fluorescent lighting.
  ● Energy saving. Power consumption is about half that of conventional fluorescent lighting.
  ● ECO. A clean light that does not use mercury.
  ● Low heat generation. Does not become hot and is safe like fluorescent lighting.
  ● Low ultraviolet rays. Since it hardly emits ultraviolet rays, pests are not attracted into the board or to its surroundings, and their intrusion can be prevented.
  ● Compact. Featuring a simple design that is compact and lightweight and which can be easily installed to boards.
  ● Low noise. A design that suppresses radiation and conduction noises.
  ● Can be mounted as desired. Because mounting is performed using a magnet sheet, illumination can be provided from the sides or from below, as well as from the upper portion in the board.
  ● The LED device used is made by Nichia Chemical Co., Ltd.

  Starting from∗ ：	92.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  LED Unit

  SHINOHARA ELECTRIC

  A unit type in which a door switch and power supply terminal block are integrated with popular LED lighting.
  
  [Use]
  ● Please use for lighting purposes for panels such as power receiving and distributing panels, distribution boards, and control panels.
  [Features]
  ● Long life. Lasts five times longer than conventional fluorescent lighting.
  ● Energy saving. Power consumption is about half that of conventional fluorescent lighting.
  ● ECO. A clean light that does not use mercury.
  ● Low heat generation. Does not become hot and is safe like fluorescent lighting.
  ● Low ultraviolet rays. Since it hardly emits ultraviolet rays, pests are not attracted into the board or to its surroundings, and their intrusion can be prevented.
  ● Shock resistant. Because no glass is used, they are safe from impacts that occur during transport or installation.
  ● Compact. Featuring a simple design that is compact and lightweight and which can be easily installed to boards.
  ● Brighter. Realizes about 1.5 times the brightness of fluorescent lights (FL10W).
  ● The position of the door switch can be adjusted forward and backward. (Slide width: 30 mm) switch motion stroke: 12.05 mm
  ● The LED device used is made by Nichia Chemical Co., Ltd.
  ● Uses halogen-free type UL3385 electric wire.

  Starting from∗ ：	102.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  LED Unit (Terminal Block Integrated Model)

  SHINOHARA ELECTRIC

  Terminal block integrated model with reduced unit size and weight. There are two types of terminal blocks to choose from, a screw terminal or an insertion terminal.
  Use this to illuminate various boards like power switchboards, panel boards, and control panels.
  
  [Features]
  · Compact. Reduced length and size compared to previous models; smaller boards can also be supported.
  · Saves labor. (1) By using an open terminal, can now easily be connected to a door switch and wired across several LEDs. (CLED-100□TB3Y)
  (2) Saves labor when wiring by integrating the relay terminal block for power lines with the fittings. (CLED-100□TB2□□)
  (3) Wiring is easy with the insertion terminal type, as a screwdriver is not required. (CLED-100□TB2WG)
  · Long operating life. Has a lifespan approximately 5 times longer than that of conventional fluorescent lights.
  · Reduces energy consumption. Consumes approximately half the power of conventional fluorescent lights.
  · Generates less heat. Safe, as it does not get hot like fluorescent lights.
  · Reduced ultraviolet rays. As it emits very little ultraviolet light, it does not allow any harmful insects in or near the board, and is able to prevent this kind of intrusion.
  · Impact-resistant. Uses absolutely no glass, providing peace of mind regarding vibration during transport and impact when installing.
  · The LED device used is made by Nichia Corporation.
  [Products]
  · 3 pole terminal block (screw terminal type): CLED-1004TB3Y (10 W model size) / CLED-1009TB3Y (20 W Size)
  · 2 pole terminal block (screw terminal type): CLED-1004TB2Y (common size) / CLED-1009TB2Y (long size)
  · 2 pole terminal block (insertion terminal type): CLED-1004TB2WG (common size) / CLED-1009TB2WG (long size)
  
  

  Starting from∗ ：	85.93 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  LED Unit (Terminal Block / Door Switch Integrated Model) Mounting Pitch 270 mm Type

  SHINOHARA ELECTRIC

  Use this to illuminate various boards like power switchboards, panel boards, and control panels.
  
  [Features]
  · Saves labor. Has the same mounting pitch as the terminal for illumination mounting of the board (produced independently by Nitto Kogyo),
  meaning it can be operated easily without any additional work. It is also unnecessary to adjust the position of the door switch.
  · Long operating life. Has a lifespan approximately 5 times longer than that of conventional fluorescent lights.
  · Reduces energy consumption. Consumes approximately half the power of conventional fluorescent lights.
  · Generates less heat. Safe, as it does not get hot like fluorescent lights.
  · Reduced ultraviolet rays. As it emits very little ultraviolet light, it does not allow any harmful insects in or near the board, and is able to prevent this kind of intrusion.
  · Impact-resistant. Uses absolutely no glass, providing peace of mind regarding vibration during transport and impact when installing.
  · The LED device used is made by Nichia Corporation.
  

  Starting from∗ ：	110.31 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  LED Unit (Terminal Block Type)

  SHINOHARA ELECTRIC

  A unit type in which a terminal block is integrated with popular LED lighting.
  
  [Use]
  ● Please use for lighting purposes for panels such as power receiving and distributing panels, distribution boards, and control panels.
  [Features]
  ● Long life. Lasts five times longer than conventional fluorescent lighting.
  ● Energy saving. Power consumption is about half that of conventional fluorescent lighting.
  ● ECO. A clean light that does not use mercury.
  ● Low heat generation. Does not become hot and is safe like fluorescent lighting.
  ● Low ultraviolet rays. Since it hardly emits ultraviolet rays, pests are not attracted into the board or to its surroundings, and their intrusion can be prevented.
  ● Shock resistant. Because no glass is used, they are safe from impacts that occur during transport or installation.
  ● Compact. Featuring a simple design that is compact and lightweight and which can be easily installed to boards.
  ● Brighter. Realizes about 1.5 times the brightness of fluorescent lights (FL10W).
  ● Labor saving. Since the relay terminal block for the power supply line is integrated with the metal fitting, labor savings can be achieved with wiring.
  ● The LED device used is made by Nichia Chemical Co., Ltd.
  ● Uses halogen-free type UL3385 electric wire.

  Starting from∗ ：	100.06 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  New Model LED Unit

  SHINOHARA ELECTRIC

  A long sized version of the popular CLED type unit is now available. Equivalent with an FL20W tube, illuminates inside the board more brightly.
  
  [Use]
  ● Please use for lighting purposes for panels such as power receiving and distributing panels, distribution boards, and control panels.
  [Features]
  ● Long life. Lasts five times longer than conventional fluorescent lighting.
  ● Energy saving. Power consumption is about half that of conventional fluorescent lighting.
  ● ECO. A clean light that does not use mercury.
  ● Low heat generation. Does not become hot and is safe like fluorescent lighting.
  ● Low ultraviolet rays. Since it hardly emits ultraviolet rays, pests are not attracted into the board or to its surroundings, and their intrusion can be prevented.
  ● Shock resistant. Because no glass is used, they are safe from impacts that occur during transport or installation.
  ● Long size. With a long size equivalent to a 20W straight tube fluorescent lamp, illuminates inside the board more brightly.
  ● The position of the door switch can be adjusted forward and backward. (Slide width: 30 mm) switch motion stroke: 12.05 mm
  ● The LED device used is made by Nichia Chemical Co., Ltd.
  ● Uses halogen-free type UL3385 electric wire.

  • Volume Discount

  Starting from∗ ：	197.61 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  LED Unit (Long Leg Type)

  SHINOHARA ELECTRIC

  Can be used in enclosures with deep dimensions for drainage. A type with a long door switch metal fitting has been added.
  
  [Use]
  ● Please use for lighting purposes for panels such as power receiving and distributing panels, distribution boards, and control panels.
  [Features]
  ● Since the leg of the door switch metal fitting is long, it can be used with enclosures having deep dimensions for drainage.
  ● Long life. Lasts five times longer than conventional fluorescent lighting.
  ● Energy saving. Power consumption is about half that of conventional fluorescent lighting.
  ● ECO. A clean light that does not use mercury.
  ● Low heat generation. Does not become hot and is safe like fluorescent lighting.
  ● Flexible. Since the position of the door switch can be adjusted forward and backward, it can be used with various drainage dimension depths.
  ● Low ultraviolet rays. Since it hardly emits ultraviolet rays, pests are not attracted into the board or to its surroundings, and their intrusion can be prevented.
  ● Shock resistant. Because no glass is used, they are safe from impacts that occur during transport or installation.
  ● The position of the door switch can be adjusted forward and backward. (Slide width: 30 mm) switch motion stroke: 12.05 mm
  ● The LED device used is made by Nichia Chemical Co., Ltd.

  Starting from∗ ：	110.31 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  New Model LED Unit (Magnet Type for Maintenance and Inspections)

  SHINOHARA ELECTRIC

  A magnet attachment type has been added to the CLED type long size series. The magnet sheet is gentle on painted surfaces.
  
  [Use]
  ● Please use as temporary lighting for maintenance during the maintenance and inspection of power receiving and distributing panels, distribution boards, and control panels, etc.
  [Features]
  ● Long life. Lasts five times longer than conventional fluorescent lighting.
  ● Energy saving. Power consumption is about half that of conventional fluorescent lighting.
  ● ECO. A clean light that does not use mercury.
  ● Low heat generation. Does not become hot and is safe like fluorescent lighting.
  ● Low ultraviolet rays. Since it hardly emits ultraviolet rays, pests are not attracted into the board or to its surroundings, and their intrusion can be prevented.
  ● Compact. Featuring a simple design that is compact and lightweight and which can be easily installed to boards.
  ● Can be mounted as desired. Because mounting is performed using a magnet sheet, illumination can be provided from the sides or from below, as well as from the upper portion in the board.
  ● The LED device used is made by Nichia Chemical Co., Ltd.

  Starting from∗ ：	134.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...