Square Connectors（Wire connection method：Crimp）

?* Information on days to ship and prices

• 

  D-Sub, D02, D02-M15 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.
  
  [Features]
  ・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
  ・Interchangeable with different connector types and commonly used accessories.
  ・The shell joint shape has polarity, fully preventing accidental reverse insertion.
  ・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
  ・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
  ・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.22 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX23A Series, Contact

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.71 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 Series【100 Pieces Per Package】

  HIROSE ELECTRONIC

  [Features]
  · This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
  · Contributing to a high-density board mounting.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.76 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Board-to-Cable Connector with 1.25-mm Pitch - DF13 Series【1-10,000 Pieces Per Package】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
  
  [Features]
  · Small.
  · A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
  · Multipole
  · The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
  · Supports automatic mounting.
  · The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
  · Complete basic functionality despite compact form factor.
  · The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
  · Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
  
  In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  CDA / CDC Common Use Screw Type and Crimp Type 16A / 250V Insert

  ILME

  CDA/CDC, Common use screw type and crimp type, 16A / 250V, insert
  
  [Features]
  ・CDA/CDC.
  ・General-use screw type, crimp type.
  ▪ 16A / 250V insert

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection)

  MISUMI

  [Features] MIAutomatic steelIs original, low cost, environmentally resistant and waterproof DD connector. It is a highly reliable crimp connection that can reduce working time. A high density connector that can be integrated into Han-E series bonnets and sockets. Please check the plug or socket before ordering.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)【1-10,000 Pieces Per Package】

  HIROSE ELECTRONIC

  [Features]
  · A new type of connector in which IDC terminals are inserted into the case.
  · By using both crimp terminals and IDC terminals, wires with different current capacities can be used in the same case.
  · Terminals can be replaced after connection, providing excellent maintainability.
  · IDC part is protected by the case to provide a high level of reliability.
  · No need for an expensive IDC machine as IDC work can be performed by simply replacing the applicator on a conventional crimping machine.
  · High-profile headers are also available for supporting board potting (filling with resin) performed as a waterproofing measure.
  · Single-row and double-row contact configurations with standard tin or gold plating for each of the “board-to-cable” and “in-line” series products.
  [Applications]
  · Convenient for various types of wiring.
  · For all types of OA equipment, including copy machines and printers.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.03 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rack and Panel Connector QR / P1 Series【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
  
  [Features]
  · The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  · The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
  · Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
  · Guide pins are metallic to withstand coupling impact.
  · Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  CNE / CSE / CCE Common Use Screw Type, Spring Type, Pressure Bonding Type 16A / 500V Insert

  ILME

  CNE / CSE / CCE, general purpose screw type / spring type / crimped type, 16A / 500V, insert
  
  [Features]
  ・CNE/CSE/CCE.
  ・General purpose screw type / spring type / crimped type.
  ▪ 16A / 500V.
  ▪ Insert

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.43 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  MRP Series Housings

  HONDA TSUSHIN KOGYO

  Housing for the MRP series.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Board-to-Cable Connector (1.25-mm Pitch, Low Profile) - DF14 Series【100 Pieces Per Package】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
  
  [Features]
  · Thin type.
  · A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
  · Circuit board mounting height: 2.5 mm.
  · This makes it possible to draw signals from places where there is no space between the circuit boards.
  · In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
  · Supports automatic mounting.
  · The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Additionally, magazine packing is also available for the on-board type.
  · Four-walled type prevents socket from scraping the circuit board.
  · Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
  · Additionally, a reinforcement bracket is included to prevent solder from peeling.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.49 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-Sub Connector (Crimped Wire Connection Type) - CD Series【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
  
  [Features]
  · Has a metal shell and so is small and lightweight.
  · Connector mounting can be performed on the chassis, front or back, or one of the sides.
  · The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
  · The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Board-to-Cable Connector (1-mm Pitch) Supporting LVDS - FX15 Series

  HIROSE ELECTRONIC

  A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DeviceNet-Compliant Connector, HR31 Series

  HIROSE ELECTRONIC

  These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
  
  [Features]
  · DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
  · Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
  · Snap-lock: The snap-lock feature creates a tactile click when mating.
  · Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
  · Designed to allow for removal by ⌀1 mm pin when improperly wired.
  · Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.10 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  IL-AG5 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · Mechanical lock structure for secure mating.
  · The locking method of the mechanical lock is strongly resistant to impact and pulling. By simply pushing in the plug, a distinct click sound accompanies the mating. Therefore, the successful mating can be confirmed when connecting to non-visible parts.
  · Unique housing structure.
  · The mating is highly reliable. The unique housing structure has protrusions and incorrect insertion prevention guides, which prevent adverse effects due to twisting when disconnecting.
  · The double locking structure securely prevents contact dropout.
  · The socket housing contact retainer uses a primary lock employing a contact lance and a secondary lock employing a flap that is integrated into the housing in two places. This provides a highly reliable double locking structure, which prevents contact dropout due to impacts or vibration.
  · The flap is mounted so as to push on the contact, temporarily locking the contact to prevent incomplete insertion.
  · Standard, and differently shaped incorrect insertion prevention types are available.
  · The fitting element conformation and color (standard type: green/incorrect insertion prevention type: light blue) differ from the standard type. Therefore, the product is ideally suited for configurations that incorporate two connectors side-by-side in identical numbers.
  · Contact featuring highly reliable design.
  · Box type, which is resilient to external effects such as deformation due to external forces.
  · Two-ply spring structure with excellent contact element characteristics.
  · The primary lance is on the inside of the contact provides horizontal insertion prevention.
  · Structure prevents reverse, horizontal insertion during housing mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX31 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.
  
  [Features]
  [High-density implementation achieved with a large number of pins]
  · These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.
  [Mechanical lock structure ensures secure fitting]
  · The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.
  [Double locking structure reliably prevents loss of contact]
  · Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.
  · The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.
  [Low insertion force structure with easy insertion and extraction]
  · A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.
  [Tin and gold plating are available for the contact finish]
  · The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.
  [Misconfiguration-prevention types also available]
  · Pin headers (70-pin and 135-pin versions) and socket housings come in standard types as well as types with different mating part conformations in order to prevent incorrect configuration. Use of these types prevents incorrect fitting when two different pin headers with pins in the same positions are used next to each other.
  · Crimping enables easy connection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.61 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX34 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  These are non-waterproof, small-type board-to-cable connectors developed mainly for on-board use.
  
  [Features]
  ・A small-type/high density connector with abundant variations.
  A small-type/high density connector with 2.2 mm (8 turns = 4 mm) contact pitch and 025 tab size.
  ・Single-row / two-row types are available supporting 3–40 pins.
  ・Furthermore, in addition to the through-hole type, circuit board pin connector, the SMT type (straight, 20/32 pins) is also available. This type is compatible with automatic mounting, allowing for a variety of connection formats.
  ・Reliable mating due to mechanical locking structure.
  ・The mechanical locking structure is resistant to vibration and pulling. Simply inserting the plug creates a clicking sound that ensures the lock is secured. This allows users to confirm proper mating even when visibility is restricted.
  ・Double-layered stop construction to prevent contact removal.
  ・Preserving the contact inside the housing involves a double-layer construction consisting of a primary stopping housing lance and a secondary, internal preset, socket housing retainer. This effectively prevents disconnection through vibrations and pulling.
  ・ Furthermore, the retainer is constructed so that its locking position cannot be set if the contact is not fully inserted. This allows for the detection of semi-inserted contacts.
  ・The socket lock is protected by a unique housing structure.
  ・A bridge is installed around the upper portion of the clock lever in the socket housing. This prevents warping and other lock lever damage when an external load is applied when cable harnesses are bundled together.
  ・High-reliability socket contact
  ・The contact is a box-style unit that is resistant to the effect of external power fluctuations, etc.
  ・The contacts have a double layer coil construction and are strongly resistant against prying. This is a highly reliable model that ensures a stable connection.
  · Crimped type for easy wire connection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  QE Series

  JAPAN AVIATION ELECTRONICS(JAE)

  Using a metallic outer shell, this square connector is fitted using a lever.
  
  [Features]
  · Hard-type with metallic shell. Structure that is resistant to vibrational impact due to a lever lock (original type).
  ・A mismatch prevention key is included in the shell to prevent mistaken and reverse mating. By using the location setting post and key sold separately, 16 mismatch prevention patterns can be created.
  ・Also compatible with WV0/WL1 and other specialized railroad cables.
  ・3 cable-side plugs are provided to match the wires being used or the work being performed.
  Original type: with lever lock mechanism
  QE-A type: by enlarging the lever portion, this type is reinforced with a lever to prevent warping and other changes that occur during use.
  QE4 Type: by scaling up the shell wire pullout opening and cable clamp diameter, cables with large outer coverings can now be accommodated with ease.
  ・Other than the original type, there is an enlarged mating shell and an enhanced shell to prevent prying and reverse mating on the panel side receptacle, as well as a noise reducing ferrite attached to the insulator. There are 3 types that include ferrite.
  ・The panel side receptacle is compatible with both electric wire crimp connection contact and circuit board through hole connection contact (pin contact) types.
  ・The shell type can be disassembled and rearranged for simple modification during circuit changes and incorrect wiring.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	71.06 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  QX Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A small, lightweight, highly reliable, square shape multipole connector.

  Select to compare

  Configure now
  Starting from∗ ：	58.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Han Q Series Connector (Crimp Wire Connection)

  HARTING

  This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.28 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Han-Modular Series: Various Modules【2 Pieces Per Package】

  HARTING

  It is possible to save space used by connectors by selecting the modules to suit the operating environment (Models are separated using "-" rather than spaces).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2.00 mm Pitch Serial I / O Connector

  MOLEX

  A Molex 2.0 mm pitch connector for external relay connection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.93 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CD Common Use Crimp Type 10A / 50 to 250 V Insert

  ILME

  CD, general purpose crimped type, 10A / 50 - 250 V, Insert
  
  [Features]
  ・CD general purpose crimped type.
  ・10A/50 - 250V.
  ▪ Insert

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.44 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  EPIC® H-Q 12

  LAPP

  Benefits
  · PE contact with screw connection
  · High performance crimping contacts
  
  Application
  · Machine and equipment manufacturing
  · Control engineering

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)

  MISUMI

  [Features] MIAutomatic steelI's original, low cost, environmentally resistant and waterproof E-type connector. It is a highly reliable crimp connection that can reduce working time. Fully compatible with major connector manufacturers' products. Please check the plug or socket before ordering.

  • Volume Discount

  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Han Module Waterproof Connector【2 Pieces Per Package】

  MISUMI

  Lightweight plastic connector with excellent environmental resistance

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Han Waterproof D-Model Connector (Crimped Connection)

  MISUMI

  D Model Connector

  • Order quantities extended (D-JIT)
  • UL
  • CSA
  • CE-Compliant
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Caulking
  • Insertion
  • Silver-Plated

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HDC HEE Series

  WEIDMUELLER

  Insert for industrial plug-in connectors, consisting of contact element and insulating body.

  Select to compare

  Configure now
  Starting from∗ ：	16.97 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  HDC HQ Series

  WEIDMUELLER

  Insert for industrial plug-in connectors, consisting of contact element and insulating body.

  Select to compare

  Configure now
  Starting from∗ ：	5.89 €
  Min. Shipping Days ：	92 Days

  *Unit price with basic configuration

• 

  Board-to-Cable / FPC / Thin Coaxial Cable Connector (1-mm Pitch) - DF19 Series【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.
  In-stock custom products cannot be returned or canceled. Thank you.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Board-to-Cable Connector with 2.5-mm Pitch Side Lock, HNC Series

  HIROSE ELECTRONIC

  A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.
  
  [Features]
  ・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
  ・Thin type: mount height when used at a right angle: 4.8 mm.
  ・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
  ・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
  ・Further, there are settings available to provide a light feel even if tin plating is used.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.27 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Board-in Board-to-Cable Connector with 2-mm Pitch, DF4 Series

  HIROSE ELECTRONIC

  Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
  
  [Features]
  ・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
  ・Small type/multi-pin: a wide range of small types with a number of pins.
  ・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
  ・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DF11 Series 2‑mm Grid Double-Row Connector (UL / CSA Standard Certified Product)【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  [Features]
  · The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.
  · Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.
  · Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.
  · Choose from gold or tin plating to match application. SMT-compatible products are also available.
  · Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.
  · Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).
  [Applications]
  · For all types of OA equipment, including copy machines and printers.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Board-to-Cable Connector DF33 Series for 3.3-mm Pitch Internal Power Supply【100 Pieces Per Package】

  HIROSE ELECTRONIC

  It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Board-to-Cable Connector for Internal Power Supply with 3.5-mm Pitch - MDF6 Series【100 Pieces Per Package】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
  
  [Features]
  · Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
  · 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
  · Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Connector with Lock for Internal Power Supply, Supports Potting with 5-mm Pitch - DF5 Series【100 Pieces Per Package】

  HIROSE ELECTRONIC

  Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.
  
  [Features]
  · Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm.
  · Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.
  · Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.
  · Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry.
  · Full lock mechanism: Equipped with an outer-lock type full-lock mechanism.
  · 8 A current rating: Can carry a maximum current of 8 Amperes.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cover Case for HIF3B Series

  HIROSE ELECTRONIC

  This is a MIL standard-compliant ribbon cable connector HIF3B series crimped socket cover case.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.15 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rack and Panel Connector, QR / P8 Series

  HIROSE ELECTRONIC

  • Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
  
  [Features]
  • Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
  • By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
  • In addition, terminals for signals are positioned with a 2-mm pitch.
  • The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
  • Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
  · The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
  • This product has obtained UL, CSA, and TUV certifications.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rack and Panel Connector, QR / P Series【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
  • For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • Guide pins are made of metal for the durability to withstand coupling shocks.
  • Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  SUMICON 1600 Series Multi-Contact Rectangular Connector【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  A rectangular multi-contact connector manufactured using a unique HIROSE design.
  [Features]
  · Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.
  · Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.
  · The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.
  · These connectors are specified in the NTT specifications, “Spec. No. 1931.”

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  IL-AG9 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  A contact relay for easy-to-use, small wire relays, with a generic performance for use in all types of automotive on-board equipment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX36 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  This is a small waterproof relay connector that was developed for automotive airbags.
  
  [Features]
  ・Small waterproof wire-to-wire (relay) connector
  · Contact tab size 025
  ・For wire-to-wire (relay) connections ・Small, waterproof crimping type
  ▪ For different types of air bags.

  Select to compare

  Configure now
  Starting from∗ ：	2.91 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX44 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A small, waterproof connector for board-to-wire connections to support the increasing demand for compact automotive connectors.

  Select to compare

  Configure now
  Starting from∗ ：	1.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...