Chamfer, V-Grooves（Application：Chamfering/Horizontal）

?* Information on days to ship and prices

• 

  AZIMUT Mobile Chamfer Carrier

  NOGAJAPAN

  A 500 W electric motor and 1.2 m flexible hose (KP-AZ0431) are required to use the NOGA AZIMUT chamfer carrier.
  

  Select to compare

  › Configure now
  Starting from∗ ：	841.80 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  AZIMUT Mobile Contouring Carrier

  NOGAJAPAN

  Applications: Chamfering, horizontal type
  , tool diameter (D) (mm): 0 to 2
  Chamfer angle (°): 45
  Set contents: Carbide Cutter KP-AZ660 included

  Select to compare

  › Configure now
  Starting from∗ ：	1,375.35 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
  · Standard type.

  Select to compare

  › Configure now
  Starting from∗ ：	80.16 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

  MISUMI

  Capable of everything from positioning to chamfering in a single shot

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	40.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

  MISUMI

  [Features]
  ・Machining from positioning to chamfering with a single tool.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	38.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  MISUMI

  [Features]
  ・Popular 3-flute type for helix angle chambering with high feed rate.
  ・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
  ・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
  ・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
  ・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
  ・It can also be used as a deburring tool.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	52.47 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P

  OSG

  Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	78.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Chamfering Cutter for SV Chamfering Process

  UNION TOOL

  [Features]
  · Carbide spiral chamfering cutter
  · Half Taper Angle of 45°
  · The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Select to compare

  › Configure now
  Starting from∗ ：	135.77 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toglon Miniature Hard SP 90° ALT Coating

  IWATA TOOL

  [Features]
  · HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	85.44 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Motor Flexible Hose for AZIMUT Mobile Chamfer Carrier

  NOGAJAPAN

  It allows straight and curved parts to be easily chamfered by tracing the edge of the workpiece.
  

  Select to compare

  › Configure now
  Starting from∗ ：	2,314.16 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]
  -Ideal for chamfers and V-grooves
  -It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	56.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	48.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]
  -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
  -The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	40.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]
  -Ideal for chamfering. Can also be used as a deburring tool
  -Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
  -Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
  -It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Select to compare

  › Configure now
  Starting from∗ ：	38.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]
  -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
  -Peripheral grooves allow bevel, contour and spiral cutting
  -The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
  -With helix angle on peripheral flutes
  -Can also be used as a deburring tool
  -It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Select to compare

  › Configure now
  Starting from∗ ：	46.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • Volume Discount

  • TS
  • SUS
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	61.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

  MISUMI

  The sharp helix blade achieves the clean machined surface with less burr

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	60.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • Volume Discount

  • TiCN
  • 2 Flutes
  • S (Short)

  Select to compare

  › Configure now
  Starting from∗ ：	46.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High-Speed Steel Chamfering End Mill, 2-Flute / Short

  MISUMI

  Chamfering end mill with the angle that can be freely selected in 1° increments

  • Non-Coated
  • 2 Flutes
  • S (Short)

  Select to compare

  › Configure now
  Min. Shipping Days ：	7 Days

• 

  XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

  MISUMI

  [Features]
  ・Popular chamfering product with helix angle.
  ・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
  ・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	34.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill 2-Flute

  MISUMI

  [Features]
  ・Recommended for chamfering general steel.
  ・Ideal for chamfering and V-groove machining.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	32.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

  MISUMI

  [Features]
  ・Recommended for deep section chamfering of general steel.
  ・Ideal for chamfering and V-groove machining.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
  ・The long type is ideal for deep cavity milling.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	43.97 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

  MISUMI

  [Features]
  ・The popular high hardness steel chamfer end mill is even more affordable.
  ・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
  ・High-efficiency machining is possible by adopting a 6-flute shape.
  ・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
  ・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	42.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2-Flute Spiral Chamfering Cutter FX-SCC

  OSG

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	88.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC

  OSG

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	81.19 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC

  OSG

  Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

  Select to compare

  › Configure now
  Starting from∗ ：	84.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC

  OSG

  Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	87.63 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute, Chamfering Cutter (Negative Type) HSCT-N

  OSG

  End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	73.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute, Chamfering Cutter (Positive Type) HSCT-P

  OSG

  End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	73.51 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N

  OSG

  End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	78.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters

  OSG

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	44.76 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Solid Chamfering End Mill 3-Flute

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	49.92 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Chatterless Chamfer Milling Machine

  FUKUDA

  6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.
  
  [Features]
  · Chamfering.
  · Drilling machines, milling machines, machining centers.
  · Horizontal Milling

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	29.83 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  New Chamfering Cutter

  EIKOSHA

  Chamfering, 1-Flute

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	42.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  SAGCCC SA Coated Carbide for Center Chamfering

  SANKO MFG

  Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.

  Select to compare

  › Configure now
  Starting from∗ ：	101.99 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  GCCC for Carbide Center Chamfering

  SANKO MFG

  [Features]
  · Melding the design concepts of endmills and drills, it is available for a wide range of applications.
  · Double angle adopted for the chamfer part.
  · Provides a clean finish with fewer burrs.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	74.70 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  CC for Centering + Chamfering

  SANKO MFG

  Center chamfering cutter used in a large variety of different applications.
  
  [Features]
  · As the outer diameter and shank have the same diameter, interference with the workpiece can be avoided.
  · Used in a large variety of different applications.

  Select to compare

  › Configure now
  Starting from∗ ：	57.19 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toglon Sharp SP 60° Carbide

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	80.94 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toglon Sharp SP 60° Carbide DLC Coating

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Select to compare

  › Configure now
  Starting from∗ ：	97.13 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toglon Sharp SP 90° Carbide

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	65.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toglon Sharp SP 90° Carbide DLC Coating

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Select to compare

  › Configure now
  Starting from∗ ：	79.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toglon Sharp SP 90° Carbide Long Type

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	88.03 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toglon Sharp SP 90° Carbide Long Type DLC Coating

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Select to compare

  › Configure now
  Starting from∗ ：	104.06 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toglon Sharp SP 60° ALD Coating

  IWATA TOOL

  [Features]
  · HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Select to compare

  › Configure now
  Starting from∗ ：	95.40 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toglon Sharp SP 90° ALD Coating

  IWATA TOOL

  [Features]
  · HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	82.46 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...