ENGINEER Screwdrivers（Single Product/Set Classification：Set Product）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Offset Ratchet Set
ENGINEER
· This is a set of Phillips, flathead, and hex bits that are frequently used with offset ratchets.
· Includes Rapid Turning Mechanism
· With magnetStarting from∗ ： 27.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bit Set DR-10 – 17
ENGINEER
A bit set with wide lineup, optimal for service engineers.
[Features]
· Bit set containing frequently used bits for a variety of applications, from short bits and long stepped bits to hex bits and more.
· Includes burette type holder for convenient bit storage and carrying.
· DR-16 is a bit set that is ideal for rechargeable/electric screwdrivers.
[Applications]
· Assembly of machinery, demolition work, maintenance of equipment, work inside factories, etc.- Volume Discount
Starting from∗ ： 13.41 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Master Grip Screwdriver Set DR-52
ENGINEER
Master grip screwdriver set equipped with frequently used magnetized strong bits.
[Features]
· Bit set that is also ideal for rechargeable or electric screwdrivers.
· The bit is made of chrome vanadium steel.
· Burette type bit holder for convenient mobility.
· A cushioned grip which fits well into the hand.
[Applications]
· For tightening and removing various screws.Starting from∗ ： 26.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Replacement Screwdriver Set DK-05 – 08
ENGINEER
Replacement screwdriver set.
[Features]
· DK-05, 06 have a low voltage detecting grip. (80 – 300 VAC/100 – 250 VDC)
· The neon tube embedded inside the unit will light up if you make contact with the screwdriver tip and push the head part of the handle with your finger.
[Applications]
· Convenient for repair and maintenance work.Starting from∗ ： 19.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Ceramic Adjustment Screwdriver Set DK-90
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).
· Pencil-type portable design with caps for protecting tip.
· 4 piece set of DA-48 and 50 to 52.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Starting from∗ ： 76.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Ceramic Adjustment Screwdriver Set (with Rotating Cap) DK-91
ENGINEER
A compact design ceramic adjustment screwdriver.
[Features]
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· It can be adjusted at 2 locations, the tip portion (Phillips/flathead bit), and the shaft portion (hexagonal type).
· The compact design of the included rotating cap's compact handle makes it easy to use.
· 8 piece set of DA-81 to DA-88.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Starting from∗ ： 69.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Special Screw Bit Set DR-18
ENGINEER
Screwdriver bit series special screw bit set that supports various special screws.
[Features]
· 10-piece set of DR-81 to 93.
· With bit holder.
[Applications]
· For all types of maintenance of mobile phones, PHS, radio sets, PC, home game machines, etc.Starting from∗ ： 67.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rapid Screw Extractor
ENGINEER
Special dedicated screwdriver-type tool for removing stripped countersunk screws that cannot be removed using Neji-saurus screw removal pliers. No hammer required.
[Features]
· Dedicated screwdriver-type tool for removing screws.
· Includes bits that can be used in places where hammering is not possible. (DBZ-51)
· Includes bit for hex socket head screws with damaged screw recesses. (DBZ-53)
· Includes two shock-absorbent rubber sleeves for protecting fingers.
· Includes dedicated handle grip for applying high torque.
[Applications]
· Can be used for countersunk screws with stripped heads.Starting from∗ ： 30.27 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
| |
| Brand | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER |
| Product Series | Ceramic Adjustment Screwdriver Set (with Rotating Cap) DK-91 | |||||||
| Starting from∗ | 27.54 € *Unit price with basic configuration | 13.41 € *Unit price with basic configuration | 26.53 € *Unit price with basic configuration | 19.11 € *Unit price with basic configuration | 76.57 € *Unit price with basic configuration | 69.89 € *Unit price with basic configuration | 67.66 € *Unit price with basic configuration | 30.27 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Tip standards | Combination | Phillips (+)/Flathead(-) / Combination | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Combination |
| Tip size / Phillips (+) | No. 00 / No. 1 / No. 2 | No. 00 / No. 0 / No. 1 / No. 2 | No. 0 / No. 1 / No. 2 | No. 1 / No. 2 | Other | Other | - | - |
| Tip size / flathead (-) blade width (mm) B1 | 4.5、6.0 | 4.5 ～ 6 | 6 | 3.5 ～ 5.5 | 0.8 ～ 2.5 | 0.9 ～ 2.5 | - | - |
| Shaft length L (mm) | - | - | - | - | - | 15 ～ 18 | - | - |
| Single Product/Set Classification | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product |
| Shaft type | - | - | Square | Round | Round | Round | Round | - |
| Magnet | - | Available | Available | N/A | N/A | N/A | Available | - |
| Shaft through | N/A | - | - | - | N/A | N/A | - | - |
| Bolster | - | - | - | - | N/A | N/A | - | - |
| Grip Type | - | - | Rubber | Resin | Resin | Resin | - | - |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | 0.35 ～ 0.7 | 0.35 ～ 0.7 | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | 1.5 ～ 6 | - | 5.5 | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No. 000
- No. 00
- No. 0
- No. 1
- No. 2
- No. 3
- No. 4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 10
- 14
- 15
- 17
- 18
- 21
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 45
- 48
- 50
- 55
- 56
- 60
- 60, 75, 80
- 68
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 81
- 90
- 92
- 93
- 95
- 97
- 98
- 99
- 100
- 102
- 105
- 107
- 110
- 111
- 112
- 114
- 115
- 117
- 118
- 120
- 121
- 125
- 128
- 129
- 130
- 133
- 140
- 150
- 152
- 153
- 160
- 180
- 190
- 200
- 206
- 220
- 240
- 250
- 267
- 275
- 300
- 390
- 400
- 500
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- N/A
-
Shaft through
- Available
- N/A
-
Bolster
- Included
- N/A
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Brand
-
- PB SWISS TOOLS (14)
- MAEDAKINNZOKU (12)
- KTC(KYOTO TOOL) (9)
- TRUSCO NAKAYAMA (9)
- ENGINEER (8)
- ANEX (7)
- WERA (5)
- HOZAN (4)
- KO-KEN TOOL (4)
- SK 11 (4)
- EIGHT TOOL (2)
- E VALUE (2)
- SUNFLAG (2)
- SUEKAGE TOOL (2)
- TRAD (2)
- BONDHUS (1)
- HANDIWORK (1)
- HIRAI KOGU (1)
- VESSEL (1)
- WIHA (1)
- ARC (0)
- CUSTOM KOBO (0)
- MATADOR (0)
- PROXXON (0)
- RITTAL (0)
- WOLFCRAFT (0)
- HIOS (0)
- SMATO (0)
- FACOM (0)
- OSG (0)
- SIGNET (0)
- GEDORE (0)
- AS ONE (0)
- WEIDMUELLER (0)
- CIMCO (0)
- KNIPEX (0)
- PHOENIX CONTACT (0)
- ESCO (0)
- HAZET (0)
- BAHCO (0)
- BERNSTEIN AG (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.