- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
GANTER Spring Locating Pins
Narrow search by specifying Type
-
Double Side Type -
Locating Pin Type -
Side Plungers -
Block Plungers -
Guide Plungers -
Spring Pins -
Stroke Pins
?* Information on days to ship and prices
-
Spring plungers with internal hexagon, Steel / Stainless Steel
GANTER
Spring plungers with internal hexagon, Steel / Stainless Steel- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.04 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers, press on type
GANTER
Spring plungers GN 614 are used as detents as well as for push-on and push-off applications and ejectors.
A tolerance of H7 for the location hole of d1 is recommended.
Due to different production methods, the dimensions l2 and l3 are different.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 0.86 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers, with slot, Steel / Stainless Steel
GANTER
Spring plungers GN 615 are used as detents as well as for push-on and push-off applications and ejectors.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 1.24 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Side thrust pins, press on type
GANTER
Spring loaded side thrust pins GN 715 are versatile and practical elements for holding, positioning and clamping of workpieces.
They eliminate costly alternatives, are space saving and easy to install. The knurled body requires only a hole tolerance of H8.
For easy mounting a suitable tool GN 715.1 -... is available. (see table).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.88 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers, Plastic
GANTER
Plastic-Spring plungers GN 615.2 are used as detents as well as for push-on and push-off applications and ejectors.
These spring plungers are all stainless versions.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 1.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Side thrust pins with thread
GANTER
Spring loaded side thrust pins GN713 are versatile and practical elements for holding, positioning and clamping workpieces.
They eliminate costly alternatives, are space saving and simple to install. The protruding height of the thrust pin can be adjusted with the threaded body.
For easy mounting a suitable tool GN 713.1 -... is available (see table).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 11.76 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers, long version
GANTER
Spring plungers GN 611 are used as ejectors, push-on and push-off operations in the sheet metal industry, as well as cushioners.
The slot on the plunger side is provided for blind hole application. A special screw driver GN 611.5-M... is available (see table).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 30.18 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring loaded shells
GANTER
Spring loaded shells GN 610 have been designed for applications where in a confined space relatively long strokes are required. In such cases the depth of the mounting hole is determined by the preload required.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 0.48 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers with bolt, Steel
GANTER
Spring plungers GN 615.1 are used as detents as well as for push-on and push-off applications and ejectors.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 1.70 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers with thread locking
GANTER
The PFB patch is a jamming thread locking (Polyamide patch). The coating for Type K or KN (standard spring load) is indicated blue, for Type KS or KSN (high spring load) green. For this Type of thread locking a relatively high torque is required. Therefore this version with internal hexagon is more preferable than the version with slot (GN 615).
MVK (Micro encapsulation) is a gluing thread locking (indicated red).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.64 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 6.96 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Eccentric bushings for side thrust pins
GANTER
Eccentric bushings GN 715.2 allow side thrust pins GN 715 / GN 714 to be adjusted. These bushings allow the side thrust pin to be precisely adjusted to suit the requirements for clamping of a component.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 24.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers with bolt, Stainless Steel
GANTER
Stainless Steel-Spring plungers GN 616 are used as detents as well as for push-on and push-off applications and ejectors.
The slot on the plunger side is provided for blind hole applications. A special screw driver GN 616.5-... is available (see table).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.78 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers with limit switch
GANTER
Spring plungers GN 615.7 are used for end stops as well as contacts.
Simultaneously an electrical control signal can be released from the built-in limit switch.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 112.78 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers, Ball with friction bearing, with slot (GN 615.8 )
GANTER
GN 615.8 Spring plungers are used for locking as well as for pressure and hold-off functions.
The ball is mounted in a plastic shell so as to be freely movable, which enables rolling and therefor generally optimizes the locking characteristics. Above all, this reduces wear on the counter piece.
A further characteristic of these plungers is that the plastic bearing acts as an electrical insulator.- Volume Discount
Starting from∗ ： 4.78 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Spring plungers, with ball, with collar, with internal hexagon
GANTER
Spring plungers GN 815.1 are used as stops as well as thrust elements or ejectors. The collar gives a defined installation position.- Volume Discount
Starting from∗ ： 5.24 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Spring plungers, press on type
GANTER
Spring plungers GN 614.4 are used for locking, as pressing and back-off pins, but also as impact dampers.
A tolerance of H7 for the location hole of d1 is recommended.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 3.00 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Side thrust pins, press on type
GANTER
Side thrust pins GN 716 are designed for holding, positioning and locating a workpiece.
They have to be pressed into the housing by at least the dimension l3, so as to ensure a positive hold.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 13.58 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Spring plungers with bolt, Steel
GANTER
Spring plungers GN 616 are used as detents as well as for push-on and push-off applications and ejectors.
The slot on the plunger side is provided for blind hole applications. A special screw driver GN 616.5-... is available (see table).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 3.18 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers, double ended
GANTER
Spring plungers GN 614.2 are a result of a further development of spring plungers type GN 614 for special applications.
A toletance H8 is recommnded for the locating bore of d1.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 3.88 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers, press on type
GANTER
Spring plungers GN 614.5 are used as detents as well as for push-on and push-off applications and ejectors.
The geometric shape of the plastic housing generates a self-clamping function which compensates drill hole tolerances of as much as 0,2 mm. It also allows the hand-tightened assembly and makes overhead installation easier.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 1.10 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers, with bolt, Steel
GANTER
Spring plungers GN 615.4 are used as detents as well as for push-on and push-off applications and ejectors.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 3.16 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers, Ball with friction bearing, with internal hexagon (GN 615.9 )
GANTER
GN 615.9 spring plungers are used for locking as well as for pressure and hold-off functions.
The ball is mounted in a plastic shell so as to be freely movable, which enables rolling and therefor generally optimizes the locking characteristics. Above all, this reduces wear on the counter piece.
A further characteristic of these plungers is that the plastic bearing acts as an electrical insulator.- Volume Discount
Starting from∗ ： 5.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Screw drivers for spring plungers GN 616
GANTER
Accessories for spring plungers GN 616.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 17.16 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring elements
GANTER
Spring elements GN 513 are universal pressure elements used as detents, positioners or for clamping with spring pressure. The spring loaded nose can be used for a push-on or push-off operation. In addition the spring loaded nose cannot rotate.
At the pulling end the female thread will accept a pulling rod or an operating knob.
Type I with a female thread at the pushing end can be fitted with a special plunger nose.
The spring element can be screwed into a thread at the hexagon on the pulling end or the spanner flats at the pushing end of the plunger.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.34 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers, without thread, with collar (GN 614.6)
GANTER
GN 614.6 spring plungers are primarily used in toolmaking as spring-loaded stops as well as for pressure and hold-off functions.
Tolerance d1 H7 is recommended for the mounting hole.- Volume Discount
Starting from∗ ： 7.56 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel-Spring plungers, with sealed bolt (GN 616.1)
GANTER
GN 616.1 Stainless Steel-Spring plungers are used for locking as well as for pressure and hold-off functions. Entry of liquids and dirt is prevented by the seal.- Volume Discount
Starting from∗ ： 12.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel-Spring plungers, without thread, ball with friction bearing (GN 614.8)
GANTER
GN 614.8 Stainless Steel-Spring plungers are used for locking as well as for pressure and hold-off functions.
The ball is mounted in a plastic shell so as to be freely movable, which enables rolling and therefor generally optimizes the locking characteristics. Above all, this reduces wear on the counter piece.
A further characteristic of these plungers is that the plastic bearing acts as an electrical insulator.
For the mounting hole, tolerance d1 F8 is recommended for joined fitting and d1 H9 for press fitting.- Volume Discount
Starting from∗ ： 4.84 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 8.86 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 21.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Mounting tools for GN 715 / GN 714
GANTER
Mounting tools for GN 715 / GN 714- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 16.78 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 51.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Side thrust pins without pressure pin, press on type
GANTER
Side thrust pins GN 714 are the result of further development of GN 715. It is left to the customer to design his own pressure pin which can be screwed into the thrust plate.
This design extends the field of applications for side thrust pins offering identical advantages i.e. they eliminate costly alternatives, are space saving and are simple to install. The knurled body requires bore to H8 tolerance only.
For easy mounting a suitable tool GN 715.1 -... is available (see table).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 9.78 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring plungers plain type, Stainless Steel
GANTER
Spring plungers GN 614.3 are installed axially through the depth of the bore whereby the dimension ”z” of the chamfer has to be taken into consideration.
Due to the thin wall of the shell press fitting is not recommended.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Spring plungers with collar, Stainless Steel
GANTER
Spring plungers Stainless Steel GN 815 are used as stops as well as thrust elements or ejectors.
The collar gives a defined installation position.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Spring plungers with collar, Steel
GANTER
Spring plungers GN 815 are used as stops as well as thrust elements or ejectors.
The collar gives a defined installation position.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.18 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Spring plungers, with sealed bolt (GN 616.1)
GANTER
GN 616.1 Stainless Steel-Spring plungers are used for locking as well as for pressure and hold-off functions. Entry of liquids and dirt is prevented by the seal.
The slit on the plunger side is used for screwing into pocket holes. For this, a special screwdriver is available as GN 616.5-M... (see table).- Volume Discount
Starting from∗ ： 7.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel-Spring plungers, with ceramic ball, Stainless Steel A4 (GN 615.5)
GANTER
GN 615.5 Stainless Steel-Spring plungers are used for locking as well as for pressure and hold-off functions.
Due to the selection of materials, the Stainless Steel-Spring plungers are suitable for use in highly corrosive environments. In addition the ceramic ball is low wearing, anti-magnetic and electrically insulating.- Volume Discount
Starting from∗ ： 6.24 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Product Series | Spring plungers with internal hexagon, Steel / Stainless Steel | Spring plungers, Ball with friction bearing, with slot (GN 615.8 ) | Spring plungers, with ball, with collar, with internal hexagon | Spring plungers, Ball with friction bearing, with internal hexagon (GN 615.9 ) | Stainless Steel-Spring plungers, with sealed bolt (GN 616.1) | Stainless Steel-Spring plungers, without thread, ball with friction bearing (GN 614.8) | Stainless Steel-Spring plungers, with ceramic ball, Stainless Steel A4 (GN 615.5) | |||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
| Starting from∗ | 2.04 € *Unit price with basic configuration Volume Discount | 0.86 € *Unit price with basic configuration Volume Discount | 1.24 € *Unit price with basic configuration Volume Discount | 5.88 € *Unit price with basic configuration Volume Discount | 1.50 € *Unit price with basic configuration Volume Discount | 11.76 € *Unit price with basic configuration Volume Discount | 30.18 € *Unit price with basic configuration Volume Discount | 0.48 € *Unit price with basic configuration Volume Discount | 1.70 € *Unit price with basic configuration Volume Discount | 2.64 € *Unit price with basic configuration Volume Discount | 6.96 € *Unit price with basic configuration Volume Discount | 24.06 € *Unit price with basic configuration Volume Discount | 7.78 € *Unit price with basic configuration Volume Discount | 112.78 € *Unit price with basic configuration Volume Discount | 4.78 € *Unit price with basic configuration Volume Discount | 5.24 € *Unit price with basic configuration Volume Discount | 3.00 € *Unit price with basic configuration Volume Discount | 13.58 € *Unit price with basic configuration Volume Discount | 3.18 € *Unit price with basic configuration Volume Discount | 3.88 € *Unit price with basic configuration Volume Discount | 1.10 € *Unit price with basic configuration Volume Discount | 3.16 € *Unit price with basic configuration Volume Discount | 5.60 € *Unit price with basic configuration Volume Discount | 17.16 € *Unit price with basic configuration Volume Discount | 7.34 € *Unit price with basic configuration Volume Discount | 7.56 € *Unit price with basic configuration Volume Discount | 12.50 € *Unit price with basic configuration Volume Discount | 4.84 € *Unit price with basic configuration Volume Discount | 8.86 € *Unit price with basic configuration Volume Discount | 21.06 € *Unit price with basic configuration Volume Discount | 16.78 € *Unit price with basic configuration Volume Discount | 51.86 € *Unit price with basic configuration Volume Discount | 9.78 € *Unit price with basic configuration Volume Discount | 2.74 € *Unit price with basic configuration Volume Discount | 7.48 € *Unit price with basic configuration Volume Discount | 5.18 € *Unit price with basic configuration Volume Discount | 7.60 € *Unit price with basic configuration Volume Discount | 6.24 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | Same day | Same day | Same day | 5 Days | Same day | Same day | Same day | Same day | Same day | 9 Days | Same day | Same day | Same day | 5 Days | 5 Days | Same day | 5 Days | Same day | Same day | Same day | Same day | 5 Days | Same day | Same day | 5 Days | 5 Days | 5 Days | 7 Days | Same day | Same day | 5 Days | Same day | 5 Days | 5 Days | 5 Days | 5 Days | Same day |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
Narrow search by specifying Brand
-
- MISUMI (4)
- GANTER (38)
- KONISHI MFG (5)
- HALDER (5)
- KIPP (3)
- IMAO CORPORATION (3)
- NABEYA BI-TECH (3)
- IFM ELECTRONIC (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 11 Days or Less
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.