GANTER Push-Pull Toggle Clamps

?* Information on days to ship and prices

• 

  Stainless Steel-Latch type toggle clamps with safety hook, heavy duty type

  GANTER

  The GN 852.3 latch type toggle clamps are compact in design and can be used to ensure high holding capacities.
  When closing the spanner, a safety hook positively locks onto the body. This prevents the inadvertent or vibration-induced release from the clamping position. To open the safety hook it is unlocked per one-hand operation.
  The U-bolt latch can be adjusted within its range.
  In addition to the standard lengths for the U-bolt latch shown above, more lengths may be achieved by using series GN 951.1 square U-bolts.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	282.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Push-pull type toggle clamps

  GANTER

  GN 840 push-pull type toggle clamps are known for their extremely low height regardless of the position of the operating handle.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	21.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Push-pull type toggle clamps, Steel

  GANTER

  Push-pull type toggle clamps GN 843.1 can be mounted on a mounting bracket (Type ASW) or directly on the jig via the threaded body with hex nut.
  The center bushing securing method allows the operating handle to be turned to the most favorable position.
  Toggle clamps GN 843.1 replace series GN 843.
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	47.26 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Push-pull type toggle clamps

  GANTER

  Push-pull type toggle clamps

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	41.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Heavy duty push-pull type toggle clamps

  GANTER

  GN 842 push-pull type toggle clamps can be used for very high holding capacities thanks to their massive and sturdy body.
  On the size 70 the mounting holes are countersunk to accept countersunk bolts with internal hexagon DIN 912-M4 countersunk bolts with internal hexagon.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	50.56 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Horizontal latch type toggle clamps, with safety hook, with pulling action

  GANTER

  The GN 851.3 latch type toggle clamps are compact in design and can be used to ensure high holding capacities.
  When closing the spanner, a safety hook positively locks onto the body. This prevents the inadvertent or vibration-induced release from the clamping position. To open the safety hook it is unlocked per one-hand operation.
  The U-bolt latch can be adjusted within its range.
  In addition to the standard lengths for the U-bolt latch shown above, more lengths may be achieved by using series GN 951.1 square U-bolts.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	36.34 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Heavy duty push-pull type toggle clamps

  GANTER

  GN 844 push-pull type toggle clamps are known for their low height in all clamping positions. They can be used to achieve very high holding forces thanks to their massive and sturdy body.
  In these devices the circular movement of the handle is transformed into a straight-line action of the clamp along its axis.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	55.60 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Horizontal latch type toggle clamps for pulling action

  GANTER

  The stroke of the U-bolt latch of latch type toggle clamps GN 851 can be adjusted within its range.
  In the clamped position the U-bolt latch with clamping arm is parallel to the plane of the operating handle.
  In addition to the standard lengths of the U-bolt latches shown in the table, a variety of other lengths are also available under the GN 951.1 series.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	20.38 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Push-pull type toggle clamps, Stainless Steel

  GANTER

  Stainless Steel-Push-pull type toggle clamps GN 843.1 can be mounted on a mounting bracket (Type ASW) or directly on the jig.
  The center bushing securing method allows the operating handle to be turned to the most favorable position.
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	99.82 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Horizontal latch type toggle clamps for pulling action

  GANTER

  The stroke of the U-bolt latch of GN 851 latch type toggle clamps can be adjusted within its range.
  In the clamped position the U-bolt latch with clamping arm is parallel to the plane of the operating handle.
  In addition to the standard lengths of the U-bolt latches shown in the table, a variety of other lengths are also available under the GN 951.1 series.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	51.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Latch type toggle clamps, heavy duty type (GN 852)

  GANTER

  GN 852 heavy duty latch type toggle clamps are used for very high holding forces as may be required in plastic high pressure mold forming. The stroke of the U-bolt latch can be adjusted within its range. In addition to the standard lengths of the U-bolt latches shown in the table, a variety of other lengths are also available under the GN 951.2 series.

  • Volume Discount

  Starting from∗ ：	250.94 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Latch clamps with trigger function

  GANTER

  The outstanding feature of GN 854 latch-type toggle clamps is their highly robust, sturdy and compact design, allowing their use under demanding conditions, e.g. exposure to high temperatures, dust, spray mist, etc.
  The specially designed catch allows the forced loosening of the clamping by the clamping arm moving the U-bolt latch forward, e.g. for separating mold halves.
  Catch with bore (coding 1) are operated with a gear lever handle which is plugged into the latch and pulled off after operation. This saves space and has the added advantage that the gear lever handle is not exposed to adverse ambient conditions, e.g. becoming too hot to operate. The gear lever handle is not included in the delivery.
  The catch can also be attached using screws or bolts.
  If required, clamps and catches are also available as separate parts; for replacement, the bearing pin is easily dismantled.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	72.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Latch-type toggle clamps with locking mechanism

  GANTER

  The Stainless Steel-Latch clamp GN 853 also features a locking mechanism which prevents the inadvertent or vibration-induced opening of the clamp.
  Another benefit is the option of operating the clamp with one hand.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	89.62 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Vertical hook type toggle clamps, heavy duty type

  GANTER

  The U-bolt latch of GN 852.1 vertical hook type toggle clamps is adjustable within the adjusting range.
  Once in the clamping position, the latch bolt is perpendicular to the clamping arm and to the mounting base of the toggle clamp.
  In addition to the standard lengths of the U-bolt latches shown in the table, a variety of other lengths are also available under the GN 951.2 series.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	91.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Latch type toggle clamps, heavy duty type (GN 852)

  GANTER

  The GN 852 heavy duty latch type toggle clamps are used for very high holding forces as may be required in plastic high pressure mold forming. The stroke of the U-bolt latch can be adjusted within its range. In addition to the standard lengths of the U-bolt latches shown in the table, a variety of other lengths are also available under the GN 951.2 series.

  • Volume Discount

  Starting from∗ ：	124.54 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Latch clamps with locking mechanism

  GANTER

  Latch clamps GN 853 feature a locking mechanism which prevents an inadvertent or vibration-induced opening of the clamp.
  Another benefit is the option of operating the clamp with one hand.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	50.44 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Latch clamps with locking mechanism

  GANTER

  GN 858 latch-type toggle clamps are used when very high retaining forces are required.
  The latch-type clamp also features a locking mechanism which prevents the inadvertent or vibration-induced opening of the clamp.
  Another benefit of this clamp is the ability to operate it with one hand.
  Catch is included.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	216.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Latch type toggle clamps for pulling action

  GANTER

  The stroke of GN 851.2 latch type toggle clamps can be adjusted within its range.
  In the clamped position the U-bolt latch and the clamping arm are horizontal to the vertical fixing plane.
  In addition to the standard lengths of the U-bolt latches shown in the table, a variety of other lengths are also available under the GN 951.1 series.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	23.98 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latch type toggle clamps with safety hook, heavy duty type

  GANTER

  The GN 852.3 latch type toggle clamps are compact in design and can be used to ensure high holding capacities.
  When closing the spanner, a safety hook positively locks onto the body. This prevents the inadvertent or vibration-induced release from the clamping position. To open the safety hook it is unlocked per one-hand operation.
  The U-bolt latch can be adjusted within its range.
  In addition to the standard lengths for the U-bolt latch shown above, more lengths may be achieved by using series GN 951.1 square U-bolts.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	165.36 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Horizontal latch type toggle clamps, with safety hook, with pull

  GANTER

  The GN 851.3 latch type toggle clamps are compact in design and can be used to ensure high holding capacities.
  When closing the spanner, a safety hook positively locks onto the body. This prevents the inadvertent or vibration-induced release from the clamping position. To open the safety hook it is unlocked per one-hand operation.
  The U-bolt latch can be adjusted within its range.
  In addition to the standard lengths for the U-bolt latch shown above, more lengths may be achieved by using series GN 951.1 square U-bolts.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	71.52 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Vertical hook type toggle clamps

  GANTER

  The stroke of the U-bolt latch of GN 851.1 hook type toggle clamps can be adjusted within its range.
  In the clamped position the U-bolt latch is perpendicular to the clamping arm.
  In addition to the standard lengths of the U-bolt latches shown in the table, a variety of other lengths are also available under the GN 951.1 series.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	49.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Vertical hook type toggle clamps

  GANTER

  The stroke of the U-bolt latch of GN 851.1 hook type toggle clamps can be adjusted within its range.
  In the clamped position the U-bolt latch with clamping arm is perpendicular to the clamping arm and the plane of the operating handle.
  In addition to the standard lengths of the U-bolt latches shown in the table, a variety of other lengths are also available under the GN 951.1 series.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	23.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...