GANTER Hooks and Shackels

?* Information on days to ship and prices

• 

  Stainless Steel-Lifting pins

  GANTER

  GN 1130 Stainless Steel-Lifting pins are carrier elements designed for fast and easy use. Pressing the red aluminium button will release the locking effect of the locking ball, allowing the load bolt to be moved in or out of the holding bore hole. The shackle rotates by at least 180°, with a safety flange fitted as a safeguard against inadvertent operation. Depending on the direction of pull, the ball load bolt may move freely by 360° in the holding bore hole.
  Sling and lifting gear permanently remaining at the workpiece (e.g. load rings) is no longer necessary. Holding bore holes with d1 H11 are sufficient in use with corresponding strength of materials. Furthermore, the GN 1132 holding bushings are also available.
  For more user guidlines, see the operating instruction enclosed with every lifting pin (see also under www.ganter-griff.com/service).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	214.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Retaining rings (saftety) (GN 111.6)

  GANTER

  GN 111.6 Stainless Steel-Retaining rings can be revolving mounted on the cut-in onto shaft ends or handle. Star knobs, for example, can be secured against loss at the place of use with an additional retaining cable.Service standard GN 111.7 lists all standard parts that can be delivered with loss protection, i.e., with groove and retaining ring.Star knobs GN 6336.13 with loss protection are delivered as a complete standard part consisting of a star knobs with cut-in and mounted retaining ring, with retaining cable or ball chain.

  • Volume Discount

  Starting from∗ ：	1.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Lifting pins

  GANTER

  GN 1130 Lifting pins are carrier elements designed for fast and easy use. Pressing the red aluminium button will release the locking effect of the locking ball, allowing the load bolt to be moved in or out of the holding bore hole. The shackle rotates by at least 180°, with a safety flange fitted as a safeguard against inadvertent operation. Depending on the direction of pull, the ball load bolt may move freely by 360° in the holding bore hole.
  Sling and lifting gear permanently remaining at the workpiece (e.g. load rings) is no longer necessary. Holding bore holes with d1 H11 are sufficient in use.
  For more user guidlines, see the operating instruction enclosed with every lifting pin (see also under www.ganter-griff.com/service).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	121.44 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...