GANTER Rod End Bearings, Spherical Bearings
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Ball joint heads with female thread
GANTER
Ball joint heads GN 648.1 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 12.86 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
GN 648.2 Ball joint heads with threaded bolt
GANTER
Ball joint heads GN 648.2 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 12.44 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ball joint heads with threaded bolt, Stainless Steel
GANTER
Stainless Steel-Ball joint heads GN 648.6 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 28.74 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
GN 346 Ball joint thrust pads, Steel
GANTER
Ball joint thrust pads GN 346 are in general used for transfer of clamping forces. They adjust themselves to uneven or non-parallel surfaces and clamp without twisting the clamped parts.
The values were arrived at by a series of tests whereby a limited number of ball joint pads were subjected for a limited time to a vertical static load to the pads.
At the values given in the table a permanent deformation of the ball is almost impossible.
Ball joint thrust pads GN 346 can also be used as levelling feet with a small foot diameter.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.40 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Ball joints
GANTER
Stainless Steel-Ball joints GN 648.9 are similar to DIN ISO 12240-1, series K.
These Stainless Steel-Ball joints are integrated in the Stainless Steel-Ball joint heads GN 648.5 and GN 648.6.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 24.68 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
GN 648.8 Ball joints
GANTER
Ball joints GN 648.8 are similar to DIN ISO 12240-4, series K.
These ball joints are integrated in the ball joint heads GN 648.1 and GN 648.2.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 10.52 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel- Angled ball joints
GANTER
Stainless Steel-Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
The angle of rotation for the type with safety catch (Type CSN) is 15°, without safety catch (Type CN) is 18°.
For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
To protect the angled ball point, a dust cap GN 710 can be added.
The hexagon nut is part of the angled ball joints.
Dust caps GN 710 have to be ordered seperately.- Volume Discount
Starting from∗ ： 15.94 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Angled ball joints
GANTER
Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.
For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
To protect the angled ball point, a dust cap GN 710 can be added.
The hexagon nut is part of the angled ball joints.
Dust caps GN 710 have to be ordered seperately.- Volume Discount
Starting from∗ ： 2.20 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Joint pieces, Stainless Steel
GANTER
Stainless Steel-Joints pieces GN 752 are designed to be used in combination with St. Steel-Fork heads DIN 71752 respectively Stainless Steel-Fork joints GN 751.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.96 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ball joint heads with female thread, Stainless Steel
GANTER
Stainless Steel-Ball joint heads GN 648.5 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 28.74 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Angled ball joints with rivet ball shank
GANTER
Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.
For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
To protect the angled ball point, a dust cap GN 710 can be added.
The hexagon nut is part of the angled ball joints.
Dust caps GN 710 have to be ordered seperately.- Volume Discount
Starting from∗ ： 2.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Joint pieces, Steel
GANTER
Joints pieces GN 752 are designed to be used in combination with fork heads DIN 71752 respectively fork joints GN 751.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.16 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Tpyes of Rod End Bearing |
| Spherical Bearing Type |
| Main Body Material |
| Connection screw M |
| I.D. D(mm) |
| Connection screw shape |
| Connection screw direction |
| The material of a ball |
| Liner Material |
| Allowable Tilt Angle α(deg) |
| Lubricating Method |
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Product Series | ||||||||||||
| CAD |
|
|
|
|
|
|
|
|
| |||
| Starting from∗ | 12.86 € *Unit price with basic configuration Volume Discount | 12.44 € *Unit price with basic configuration Volume Discount | 28.74 € *Unit price with basic configuration Volume Discount | 6.40 € *Unit price with basic configuration Volume Discount | 24.68 € *Unit price with basic configuration Volume Discount | 10.52 € *Unit price with basic configuration Volume Discount | 15.94 € *Unit price with basic configuration Volume Discount | 2.20 € *Unit price with basic configuration Volume Discount | 7.96 € *Unit price with basic configuration Volume Discount | 28.74 € *Unit price with basic configuration Volume Discount | 2.26 € *Unit price with basic configuration Volume Discount | 5.16 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day |
| Type | - | - | - | - | - | - | - | - | - | - | - | - |
| Tpyes of Rod End Bearing | - | - | - | - | - | - | - | - | - | - | - | - |
| Spherical Bearing Type | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Material | - | - | - | - | - | - | - | - | Stainless Steel | - | - | - |
| Connection screw M | M4 ～ M30 | M5 ～ M30 | M5 ～ M30 | M8 ～ M16 | - | - | M5 ～ M14 | M5 ～ M14 | M6 ～ M16 | M5 ～ M30 | M5 ～ M14 | M6 ～ M16 |
| I.D. D(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection screw shape | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection screw direction | - | - | - | - | - | - | - | - | - | - | - | - |
| The material of a ball | - | - | - | - | - | - | - | - | - | - | - | - |
| Liner Material | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Tilt Angle α(deg) | - | - | - | - | - | - | - | - | - | - | - | - |
| Lubricating Method | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Type
- Rod End Bearing
- Spherical Bearing
-
Tpyes of Rod End Bearing
-
Standard -
Link Ball L -
Link Ball Straight
-
-
Spherical Bearing Type
-
Standard -
Pillow Block A -
Pillow Block C -
Flange Type 4 Hole
-
-
Main Body Material
- Aluminum
- Chrome Molybdenum Steel
- High strength zinc alloy
- Resin
- Stainless Steel
- Steel
-
Connection screw M
-
I.D. D(mm)
- 2
- 3
- 4
- 5
- 6
- 6.35
- 8
- 10
- 12
- 12.7
- 13
- 14
- 15
- 15.875
- 16
- 17
- 18
- 19
- 19.05
- 19.1
- 20
- 22
- 22.2
- 22.225
- 25
- 25.4
- 28
- 30
- 31.7
- 31.75
- 32
- 34.925
- 35
- 37
- 38.1
- 40
- 44
- 44.4
- 44.45
- 45
- 50
- 50.8
- 55
- 57.15
- 60
- 63
- 63.5
- 65
- 69.8
- 69.85
- 70
- 75
- 76.2
- 80
- 82.55
- 85
- 88.9
- 90
- 95
- 95.25
- 100
- 101.6
- 105
- 110
- 114.3
- 120
- 125
- 130
- 135
- 140
- 150
- 160
- 180
- 200
- 220
- 240
- 260
- 280
- 300
-
Connection screw shape
- Male thread
- Female Thread
-
Connection screw direction
- Right Screw
- Left Screw
-
The material of a ball
-
Liner Material
-
Allowable Tilt Angle α(deg)
-
Lubricating Method
Narrow search by specifying Brand
-
- MISUMI (6)
- INA (77)
- ELGES (71)
- SKF (69)
- DURBAL (63)
- ZEN (60)
- KIPP (20)
- GANTER (12)
- IGUS (10)
- THK (9)
- MINEBEA (8)
- NKE BEARINGS (5)
- TRUSCO NAKAYAMA (4)
- CCVI (3)
- IKO (3)
- OZAK (3)
- HALDER (2)
- REYHER (1)
- AIRTAC (1)
- ELESA (1)
- OILES (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Rod End Bearings, Spherical Bearings
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.