- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
HALDER Guide Elements
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 330.12 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 198.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Jaws for Five-Sided Machining Sets
HALDER
Pull-down elements suitable for clamping and pulling unmachined clamping surfaces down onto the guideway or onto the 90-mm support plates supplied. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the support plates largely reduces vibrations in the workpiece.
Supplied in handycase consisting of:
4 x wedge adapters for five-sided machining jaw (Art. No. 1704.410)
4 x wedge elements, four-point (Art. No. 1703.340)
4 x wedge elements, Microgripper (Art. No. 1703.350)
2 x insertable plates (h1=90 mm) (Art. No. 1704.520)
20 x cheese-head screws M 6 x 8 (Art. No. 1704.600)Starting from∗ ： 1,436.66 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 315.54 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 259.73 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
Starting from∗ ： 1,419.30 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Clamping Jaws, for floating clamp M 12 / lower clamping jaw with flat-faced ball and pivot function, plain surface, protected against rotating
HALDER
The clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.
The upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.
In the upper clamping jaw with female thread M 8 (23320.0154 / .0156 - picture 4 + 5) different standard parts can be screwed in as required.
The lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.Starting from∗ ： 140.35 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 953.91 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 35.14 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Insertable Plates
HALDER
Three support heights. For levelling the workpiece on the five-sided machining jaws. Ground to high accuracy. Supplied without M 6 x 8 mm mounting screws (Art. No. 1704.600). This product is supplied as a pair.- 3D CAD data available
Starting from∗ ： 176.88 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 303.47 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 136.78 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Jaws, soft
HALDER
For self-made special jaws. Chamfer provides very good accessibility to the workpiece.- 3D CAD data available
Starting from∗ ： 198.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Mounting Blocks, V70eco
HALDER
V70eco mounting blocks are a further development of the established V70 product line, optimized in quality and price. They are fully compatible with the existing V70 T-slot System.- 3D CAD data available
Starting from∗ ： 245.15 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 280.97 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Multi-Vices, MS 125eco
HALDER
The all-round clamping system is a classic for conventional clamping and gripp clamping. It is suitable for all common milling. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece.
The MS 125eco is designed for fast machining of unmachined/semi-finished parts as well as of finished products. It is equally suitable for gripp clamping in the first clamping as well as for conventional clamping in the second clamping without refitting. ground jaws for high precision in the machining of workpieces. high-pressure spindle with mechanical power intensifier (operation with torque wrench). up to 40 kN clamping force (linearly increasing, at max. 30 Nm). solid base made of GGG 60, top and bottom surface ground. threats M8 on both sides for workpiece stop. precise alignment slots in the ground bottom surface for an optimal alignment on the machine table
Scope of supply:
1 piece MS 125eco. 1 set step jaws for gripper studs. 4 pieces gripper studs, pointed. 4 pieces clamping elements. 3 pieces wrenches
All components of the product ranges "conventional clamping" and "gripp clamping" as well as the accessories for the Multi-Vice MS 125 are fully compatible to MS 125eco. For horizontal machining Halder basic elements (angles/cubes) can be used.Starting from∗ ： 2,340.67 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Prismatic Jaws
HALDER
For horizontal and vertical clamping of round and flat workpieces. Please order mounting screws separately (Art. No. 1701.300). This product is supplied as a two piece.Starting from∗ ： 605.31 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Seating Pins
HALDER
Five support heights. For levelling the workpiece on the guideway. Ground to high accuracy.- 3D CAD data available
Starting from∗ ： 70.22 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 15.03 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 941.07 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Support Jaws, for mounting various gripper studs
HALDER
For mounting various gripper studs (Art. No. 1702.710-1702.780) or a universal gripper set (Art. No. 1702.600). For three-point clamping. Front surface can be used as clamping surface (hardened and ground)
Supplied without gripper studs or gripper sets.Starting from∗ ： 584.20 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 1,872.50 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 168.08 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 100.44 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
Starting from∗ ： 737.44 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Aligning and Fixing Sets
HALDER
For aligning (positioning) and fastening the vice on the machine table.
Size according to T-slot or thread in the machine table.Starting from∗ ： 179.77 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Base Jaws, hard
HALDER
One side smooth and ground, one side serrated. Additional threads for parallels and for mounting the interchangeable jaws (Art. No. 1701.250-1701.280) on the smooth side. Mountings for click system (Art. No. 1701.190-1701.200) on both sides of the jaw.- 3D CAD data available
Starting from∗ ： 407.32 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Base Jaws, soft
HALDER
Jaws of case hardened steel. For self-made special jaws. Please order mounting screws separately (Art. No. 1701.300). This product is supplied as a pair.Starting from∗ ： 410.09 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 911.68 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Base Plates, V70eco
HALDER
V70eco base plates are a further development of the established V70 product line, optimized in quality and price.
They are fully compatible with the existing V70 T-slot System.
• Centers to H6 tolerance and slots to H8 tolerance.
• Alignment of the base plate on the machine table by means of centers and/or centering slot.
• Fastening holes on a 100 mm pitch.
• High tensile tool steel.- 3D CAD data available
Starting from∗ ： 2,130.63 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Base Plates, V70eco, overall dimensions same as pallets DIN 55201
HALDER
V70eco base plates are a further development of the established V70 product line, optimized in quality and price.
They are fully compatible with the existing V70 T-slot System.
• Centers to H6 tolerance and slots to H8 tolerance.
• Alignment of the base plate on the machine table by means of centers and/or centering slot.
• Fastening holes on a 100 mm pitch.
• High tensile tool steel.- 3D CAD data available
Starting from∗ ： 3,138.52 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 1,631.67 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 712.80 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Clamping Angles, modular design
HALDER
The modular clamping angle is a unit consisting of a support plate and two base plates.Assembly or disassembly is possible within a very short time.The base plates used correspond to the respective standard version.- 3D CAD data available
Starting from∗ ： 8,176.67 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 2,646.60 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 2,742.37 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 44.31 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 317.55 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 6,457.43 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 2,686.63 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 2,478.52 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 113.27 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Clamping Jaws, for floating clamp M 12 / upper clamping jaw with location hole
HALDER
The clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.
The upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.
In the upper clamping jaw with female thread M 8 (23320.0154 / .0156 - picture 4 + 5) different standard parts can be screwed in as required.
The lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.- 3D CAD data available
Starting from∗ ： 119.37 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 530.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 96.92 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
| Product Series | Base Plates, V70eco, overall dimensions same as pallets DIN 55201 | Clamping Jaws, for floating clamp M 12 / upper clamping jaw with location hole | |||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||
| Starting from∗ | 330.12 € *Unit price with basic configuration | 198.00 € *Unit price with basic configuration | 1,436.66 € *Unit price with basic configuration | 315.54 € *Unit price with basic configuration | 259.73 € *Unit price with basic configuration | 1,419.30 € *Unit price with basic configuration | 140.35 € *Unit price with basic configuration | 953.91 € *Unit price with basic configuration | 35.14 € *Unit price with basic configuration | 176.88 € *Unit price with basic configuration | 303.47 € *Unit price with basic configuration | 136.78 € *Unit price with basic configuration | 198.00 € *Unit price with basic configuration | 245.15 € *Unit price with basic configuration | 280.97 € *Unit price with basic configuration | 2,340.67 € *Unit price with basic configuration | 605.31 € *Unit price with basic configuration | 70.22 € *Unit price with basic configuration | 15.03 € *Unit price with basic configuration | 941.07 € *Unit price with basic configuration | 584.20 € *Unit price with basic configuration | 1,872.50 € *Unit price with basic configuration | 168.08 € *Unit price with basic configuration | 100.44 € *Unit price with basic configuration | 737.44 € *Unit price with basic configuration | 179.77 € *Unit price with basic configuration | 407.32 € *Unit price with basic configuration | 410.09 € *Unit price with basic configuration | 911.68 € *Unit price with basic configuration | 2,130.63 € *Unit price with basic configuration | 3,138.52 € *Unit price with basic configuration | 1,631.67 € *Unit price with basic configuration | 712.80 € *Unit price with basic configuration | 8,176.67 € *Unit price with basic configuration | 2,646.60 € *Unit price with basic configuration | 2,742.37 € *Unit price with basic configuration | 44.31 € *Unit price with basic configuration | 317.55 € *Unit price with basic configuration | 6,457.43 € *Unit price with basic configuration | 2,686.63 € *Unit price with basic configuration | 2,478.52 € *Unit price with basic configuration | 113.27 € *Unit price with basic configuration | 119.37 € *Unit price with basic configuration | 530.26 € *Unit price with basic configuration | 96.92 € *Unit price with basic configuration |
| Min. Shipping Days ： | 3 Days | 3 Days | 3 Days | 3 Days | 1 Day | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | Same day | 3 Days | 3 Days | 3 Days | 3 Days | 1 Day | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days |
Loading...
Categories related to Guide Elements
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.