MAEDLER Shaft Couplings（Allowable Torque Range：100 to Less Than 500）
Narrow search by specifying Type
-
With Slit -
Disc Type -
Oldham Type -
Jaw Type -
Bellows Type -
Others -
Vibration Damping Rubber Type
?* Information on days to ship and prices
-
Elastic Couplings MAEPEX® 3-part Version
MAEDLER
Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250).
Elastomers: NBR, hardness 80ºA Shore, black.
Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring. The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.
The MÄDLER® version is improved:
Machined claws result in longer lifetime.
Couplings are non-bored or pre-bored, depending on the size.
Customized bores and feather-key grooves available at extra charge.
Temperature range: -30ºC to +80ºC.- Volume Discount
Starting from∗ ： 135.22 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Two-Piece Clamp Couplings MAT, Steel, without Keyway
MAEDLER
Material: Steel C45, black oxide finish.
Temperature range from -40ºC to +175ºC.
Maximum torque 4,000 min-1.
The screws ISO 4762 are covered with a layer of polyamide.
Thus the bolts do not loosen with vibrations.
Bore tolerance:+ 0.051 mm.- Volume Discount
Starting from∗ ： 60.62 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Two-Piece Clamp Couplings MAT, Stainless Steel, without Keyway
MAEDLER
Material: Stainless steel 1.4305 (AISI 303).
Temperature range from -40ºC to +175ºC.
Maximum torque 4,000 min-1.
The screws ISO 4762 are covered with a layer of polyamide.
Thus the bolts do not loosen with vibrations.
Bore tolerance: + 0.051 mm.- Volume Discount
Starting from∗ ： 154.70 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Set-Screw Couplings TR, Steel, without Keyway
MAEDLER
Material: Steel C45, black oxide finish.
Bore tolerance: +0.05 mm.
These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly aligned shafts.- Volume Discount
Starting from∗ ： 46.95 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Set-Screw Couplings TR, Stainless Steel, without Keyway
MAEDLER
Material: Stainless Steel 1.4305 (AISI 303).
Bore tolerance: +0.05 mm.
These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly aligned shafts.- Volume Discount
Starting from∗ ： 102.84 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Elastic Couplings MAEPEX®
MAEDLER
Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250).
Elastomers: NBR, hardness 80ºA Shore, black.
Torsionally flexible cam coupling, fail-safe, with damping effect.
The MÄDLER® version is improved:
Machined claws result in longer lifetime.
Couplings are non-bored or pre-bored, depending on the size.
Customized bores and feather-key grooves available at extra charge.
Temperature range: -30ºC to +80ºC.- Volume Discount
Starting from∗ ： 64.49 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Two-Piece Clamp Couplings MAT, Steel, with Keyway
MAEDLER
Material: Steel C45, black oxide finish.
Temperature range from -40ºC to +175ºC.
Maximum torque 4,000 min-1.
The screws ISO 4762 are covered with a layer of polyamide.
Thus the bolts do not loosen with vibrations.
Bore tolerance:+ 0.051 mm.- Volume Discount
Starting from∗ ： 75.78 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Two-Piece Clamp Couplings MAT, Stainless Steel, with Keyway
MAEDLER
Material: Stainless steel 1.4305 (AISI 303).
Temperature range from -40ºC to +175ºC.
Maximum torque 4,000 min-1.
The screws ISO 4762 are covered with a layer of polyamide.
Thus the bolts do not loosen with vibrations.
Bore tolerance:+ 0.051 mm.- Volume Discount
Starting from∗ ： 178.89 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Set-Screw Couplings TR, Steel, with Keyway
MAEDLER
Material: Steel C45, black oxide finish.
Bore tolerance: +0.05 mm.
These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly aligned shafts.- Volume Discount
Starting from∗ ： 58.70 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Set-Screw Couplings TR, Stainless Steel, with Keyway
MAEDLER
Material: Stainless Steel 1.4305 (AISI 303).
Bore tolerance: +0.05 mm.
These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly aligned shafts.- Volume Discount
Starting from∗ ： 124.55 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
One-Piece Clamp Couplings MAS, Steel, without Keyway
MAEDLER
Material: Steel C45, black oxide finish.
Temperature range from -40ºC to +175ºC.
Maximum torque 4,000 min-1.
The screws ISO 4762 are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations.
Bore tolerance: +0.051 mm.- Volume Discount
Starting from∗ ： 40.32 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
One-Piece Clamp Couplings MAS, Steel, with Keyway
MAEDLER
Material: Steel C45, black oxide finish.
Temperature range from -40ºC to +175ºC.
Maximum torque 4,000 min-1.
The screws ISO 4762 are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations.
Bore tolerance: +0.051 mm.- Volume Discount
Starting from∗ ： 50.38 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
One-Piece Clamp Couplings MAS, Stainless Steel, without Keyway
MAEDLER
Material: Stainless steel 1.4305 (AISI 303).
Temperature range from -40ºC to +175ºC.
Maximum torque 4,000 min-1.
The screws ISO 4762 are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations.
Bore tolerance: +0.051 mm.- Volume Discount
Starting from∗ ： 119.62 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
One-Piece Clamp Couplings MAS, Stainless Steel, with Keyway
MAEDLER
Material: Stainless steel 1.4305 (AISI 303).
Temperature range from -40ºC to +175ºC.
Maximum torque 4,000 min-1.
The screws ISO 4762 are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations.
Bore tolerance: +0.051 mm.- Volume Discount
Starting from∗ ： 152.10 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Allowable Misalignment |
| Application |
| Allowable Torque Range(N•m) |
| Shaft Bore Dia. (machined) D1(mm) |
| Shaft Bore Dia. (machined) D2(mm) |
| Outer Dia. A(mm) |
| Overall Length W(mm) |
| Max. Rotational Speed Range(r/min) |
| Feature |
| Body Material |
| Category |
| Allowable Torque(Nm) |
| Max. Rotational Speed(r/min) |
| Allowable Lateral Misalignment Range(mm) |
| Allowable Lateral Misalignment(mm) |
| Allowable Angular Misalignment(deg) |
| Buffer Part Material |
| Disc Part Material |
| Bellows Part Material |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Two-Piece Clamp Couplings MAT, Stainless Steel, without Keyway | One-Piece Clamp Couplings MAS, Stainless Steel, without Keyway | ||||||||||||
| Starting from∗ | 135.22 € *Unit price with basic configuration Volume Discount | 60.62 € *Unit price with basic configuration Volume Discount | 154.70 € *Unit price with basic configuration Volume Discount | 46.95 € *Unit price with basic configuration Volume Discount | 102.84 € *Unit price with basic configuration Volume Discount | 64.49 € *Unit price with basic configuration Volume Discount | 75.78 € *Unit price with basic configuration Volume Discount | 178.89 € *Unit price with basic configuration Volume Discount | 58.70 € *Unit price with basic configuration Volume Discount | 124.55 € *Unit price with basic configuration Volume Discount | 40.32 € *Unit price with basic configuration Volume Discount | 50.38 € *Unit price with basic configuration Volume Discount | 119.62 € *Unit price with basic configuration Volume Discount | 152.10 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Misalignment | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque Range(N•m) | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 | 100 to Less Than 500 |
| Shaft Bore Dia. (machined) D1(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft Bore Dia. (machined) D2(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Outer Dia. A(mm) | - | 29 ～ 53 | 42 ～ 77 | 45 ～ 85 | 53 ～ 77 | - | 29 ～ 53 | 42 ～ 77 | 45 ～ 85 | 53 ～ 85 | 29 ～ 53 | 29 ～ 53 | 45 ～ 77 | 45 ～ 77 |
| Overall Length W(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. Rotational Speed Range(r/min) | - | 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 | - | 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 |
| Feature | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Body Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Category | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body |
| Allowable Torque(Nm) | 480 | 105 ～ 475 | 130 ～ 445 | 135 ～ 490 | 105 ～ 210 | 102 ～ 480 | 105 ～ 475 | 130 ～ 445 | 135 ～ 490 | 105 ～ 340 | 105 ～ 475 | 105 ～ 475 | 110 ～ 400 | 110 ～ 400 |
| Max. Rotational Speed(r/min) | - | 4000 | 4000 | 4000 | 4000 | - | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 |
| Allowable Lateral Misalignment Range(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Lateral Misalignment(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Angular Misalignment(deg) | 0.2 | 0 | 0 | 0 | 0 | 0.2 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Buffer Part Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Disc Part Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Bellows Part Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Allowable Misalignment
-
Not Provided -
Angular Misalignment -
Eccentricity -
Axial Misalignment
-
-
Application
- Standard
- Servo Motor
- Stepping Motor
- Encoder
-
Allowable Torque Range(N•m)
-
Shaft Bore Dia. (machined) D1(mm)
-
Shaft Bore Dia. (machined) D2(mm)
- 1
- 1.5
- 2
- 2.4
- 2.5
- 3
- 3.17
- 3.2
- 3.5
- 4
- 4.5
- 4.76
- 5
- 5.5
- 6
- 6.35
- 7
- 7.93
- 8
- 8.5
- 9
- 9.252
- 9.5
- 9.52
- 9.525
- 9.53
- 10
- 11
- 12
- K 12
- 12.7
- 13
- 14
- K 14
- 14.5
- 15
- 15.875
- 16
- K 16
- 17
- 18
- K 18
- 18.5
- 19
- 20
- K 20
- 21
- 22
- K 22
- 23
- 23.5
- 24
- 25
- 25.4
- 26
- 27
- 28
- 28.5
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 48
- 50
- 52
- 55
- 56
- 58
- 60
-
Outer Dia. A(mm)
- 6
- 6.4
- 6.5
- 8
- 9
- 9.5
- 10
- 12
- 12.7
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 15.9
- 16
- 16.1
- 16.5
- 16.6
- 16.8
- 17
- 17.5
- 18
- 19
- 19.1
- 19.5
- 20
- 21
- 22
- 22.2
- 24
- 24.5
- 25
- 25.4
- 25.5
- 26
- 26.2
- 26.5
- 26.6
- 27
- 27.3
- 28
- 29
- 30
- 31.7
- 31.8
- 32
- 32.5
- 33.3
- 34
- 34.4
- 35
- 36
- 38
- 39
- 39.5
- 40
- 40.5
- 41.0
- 41.3
- 42
- 42.5
- 43
- 44
- 44.5
- 45
- 46
- 47
- 48
- 49
- 50
- 53
- 53.6
- 54
- 54.5
- 55
- 56
- 57
- 58
- 60
- 62
- 63
- 64
- 64.5
- 65
- 66
- 66.5
- 67
- 68
- 69
- 69.9
- 70
- 73
- 74.5
- 75
- 77
- 79
- 79.5
- 80
- 81
- 82
- 83
- 85
- 87
- 88
- 90
- 93
- 94
- 94.5
- 95
- 99
- 100
- 102
- 104
- 104.5
- 105
- 109
- 110
- 112
- 115
- 117
- 118
- 119
- 120
- 122
- 125
- 126
- 129
- 135
- 136.5
- 138
- 140
- 143
- 144
- 150
- 152
- 155
- 157
- 160
- 161
- 168
- 169
- 170
- 175
- 178
- 185
- 190
- 194
- 200
- 208
- 210
- 214
- 215
- 225
- 246
- 255
- 260
- 262
- 276
- 285
- 290
- 308
- 320
- 346
- 370
- 420
-
Overall Length W(mm)
- 5.1
- 7.3
- 8.4
- 9
- 9.4
- 9.6
- 10
- 10.2
- 10.4
- 10.5
- 11.2
- 11.4
- 11.8
- 12
- 12.35
- 12.4
- 12.7
- 13
- 13.2
- 13.5
- 14
- 14.05
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 14.9
- 15
- 15.5
- 15.6
- 15.7
- 15.8
- 15.9
- 16
- 16.2
- 16.5
- 16.6
- 16.7
- 17
- 17.4
- 17.6
- 17.8
- 18
- 18.1
- 18.4
- 18.5
- 18.7
- 18.8
- 19
- 19.1
- 19.3
- 19.35
- 19.4
- 19.6
- 19.7
- 19.8
- 20
- 20.2
- 20.4
- 20.5
- 20.6
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 22
- 22.1
- 22.2
- 22.5
- 23
- 23.1
- 23.15
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.9
- 24
- 24.1
- 24.2
- 24.4
- 24.5
- 24.9
- 25
- 25.4
- 25.5
- 25.6
- 25.7
- 25.9
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 27
- 27.2
- 27.3
- 27.4
- 27.6
- 28
- 28.2
- 28.4
- 28.5
- 29
- 29.5
- 29.8
- 30
- 30.2
- 30.4
- 30.5
- 30.8
- 31
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 32
- 32.2
- 32.3
- 32.5
- 32.6
- 32.7
- 32.8
- 33
- 33.3
- 33.5
- 33.8
- 34
- 34.4
- 34.5
- 35
- 35.3
- 35.6
- 36
- 36.5
- 36.8
- 37
- 37.2
- 37.4
- 37.5
- 37.8
- 38
- 38.2
- 38.5
- 38.6
- 39
- 39.2
- 39.4
- 39.5
- 39.7
- 40
- 40.1
- 40.5
- 41
- 41.8
- 42
- 42.3
- 43
- 43.2
- 43.4
- 43.5
- 43.6
- 44
- 44.2
- 44.5
- 44.7
- 44.8
- 45
- 45.2
- 45.6
- 46
- 46.2
- 46.6
- 47
- 47.1
- 47.6
- 48
- 48.4
- 49
- 49.2
- 49.4
- 49.7
- 50
- 50.2
- 50.6
- 50.8
- 51
- 51.2
- 51.3
- 52
- 52.5
- 52.8
- 53
- 53.2
- 53.4
- 53.6
- 54
- 54.1
- 54.3
- 54.4
- 54.5
- 54.6
- 55
- 55.5
- 56
- 56.2
- 56.5
- 56.6
- 57
- 58
- 58.2
- 58.3
- 58.5
- 58.6
- 59.3
- 59.7
- 59.8
- 59.9
- 60
- 60.4
- 60.5
- 60.6
- 60.8
- 61
- 61.2
- 62
- 63
- 63.3
- 63.4
- 63.5
- 63.6
- 63.7
- 63.8
- 64
- 64.8
- 65
- 65.6
- 66
- 66.6
- 66.8
- 67
- 67.1
- 67.5
- 68
- 68.3
- 68.5
- 68.6
- 68.7
- 68.8
- 69
- 69.5
- 69.6
- 69.8
- 70
- 70.5
- 70.6
- 70.7
- 71
- 71.2
- 71.4
- 72
- 72.1
- 72.4
- 73
- 73.3
- 74
- 74.4
- 74.8
- 75
- 75.6
- 75.8
- 76
- 76.2
- 77
- 77.6
- 77.8
- 78
- 78.3
- 78.8
- 79
- 79.5
- 79.8
- 80
- 80.8
- 81
- 82
- 82.5
- 82.6
- 82.8
- 83
- 83.6
- 84
- 84.7
- 85
- 85.2
- 85.5
- 85.6
- 86
- 87.2
- 88
- 89
- 89.3
- 89.5
- 89.6
- 89.8
- 90
- 90.3
- 90.5
- 90.8
- 91
- 92
- 93
- 93.6
- 94
- 95
- 95.6
- 96
- 96.2
- 97
- 97.2
- 98
- 98.5
- 98.6
- 99
- 99.2
- 99.6
- 100
- 100.2
- 101
- 101.6
- 102
- 102.5
- 103
- 104
- 104.4
- 105
- 105.8
- 106
- 107
- 107.6
- 108
- 109
- 110
- 111
- 112
- 112.8
- 113
- 114
- 114.2
- 115
- 115.6
- 116
- 116.5
- 117
- 117.6
- 118
- 118.4
- 119.6
- 120
- 120.8
- 121
- 123
- 123.6
- 124
- 125
- 126
- 126.5
- 127
- 128
- 129
- 129.6
- 130
- 131
- 133
- 136
- 136.4
- 137.6
- 138
- 140
- 140.2
- 141
- 142
- 144
- 144.2
- 146
- 147
- 150
- 150.6
- 153.0
- 154
- 154.6
- 156.4
- 158
- 160
- 162
- 164
- 164.6
- 168
- 170
- 170.6
- 176
- 178.4
- 182.8
- 192.4
- 193
- 195
- 200
- 206
- 208.8
- 209.2
- 216
- 217
- 218
- 223
- 238
- 241.2
- 249.4
- 260
- 286.8
- 290
- 307
- 335
- 337.2
- 377
- 391
- 421
- 607
-
Max. Rotational Speed Range(r/min)
-
Feature
-
Body Material
-
Category
- Coupling Main Body
- Maintenance Components
-
Allowable Torque(Nm)
-
Max. Rotational Speed(r/min)
-
Allowable Lateral Misalignment Range(mm)
-
Allowable Lateral Misalignment(mm)
-
Allowable Angular Misalignment(deg)
-
Buffer Part Material
-
Disc Part Material
-
Bellows Part Material
Narrow search by specifying Brand
-
- MISUMI (0)
- MAEDLER (14)
- SUNGIL (11)
- MIKI PULLEY (6)
- NABEYA BI-TECH (6)
- SAKAI MANUFACTURING (6)
- R+W (5)
- KAYSEVEN (5)
- ADVANCED (2)
- NIHON MINIATURE (2)
- ISEL (1)
- MIGHTY (1)
- MITSUBOSHI BELTING (1)
- GANTER (0)
- KBK (0)
- SCH (0)
- KOYO ELECTRONICS INDUSTRIES (0)
- ORIENTAL MOTOR (0)
- KTR SYSTEMS (0)
- LINK (0)
- FESTO (0)
- IFM ELECTRONIC (0)
- NORELEM (0)
- KIPP (0)
- VMA (0)
- ABP ANTRIEBSTECHNIK (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
Examples how you can use these components Test
Categories related to Shaft Couplings
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.