- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
MISUMI Chamfering / Centering Tools（work material：Cast Iron）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set
MISUMI
Frequently used standard sizes are offered in a set at an affordable priceStarting from∗ ： 93.10 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
-Ideal for chamfers and V-grooves
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Starting from∗ ： 56.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]
-Ideal for chamfering. Can also be used as a deburring tool
-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Starting from∗ ： 38.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack
MISUMI
Carbide spot drill that contributes to higher efficiency in chamfering- Volume Discount
Starting from∗ ： 36.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
MISUMI
[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 52.47 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
[Features]
・Machining from positioning to chamfering with a single tool.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 38.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of Workpieces- Volume Discount
- TS
- General Steel
- 2 Flutes
Starting from∗ ： 48.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 2-flute / 15° spiral
MISUMI
[Features]
-The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Starting from∗ ： 40.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 3-flute / short model
MISUMI
[Features]
-Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
-Peripheral grooves allow bevel, contour and spiral cutting
-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
-With helix angle on peripheral flutes
-Can also be used as a deburring tool
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Starting from∗ ： 46.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide inner R-cutter, 2-flute
MISUMI
[Features]
Easy high-quality machining of corner radii
-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 2 Flutes
Starting from∗ ： 41.04 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide inner R-cutter, 2-flute
MISUMI
Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Starting from∗ ： 40.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
MISUMI
The chamfer angle can be selected from 60, 90 and 120°according to the machining style- Volume Discount
- TiCN
- 2 Flutes
- S (Short)
Starting from∗ ： 46.23 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
High-Speed Steel Chamfering End Mill, 2-Flute / Short
MISUMI
Chamfering end mill with the angle that can be freely selected in 1° increments- Non-Coated
- 2 Flutes
- S (Short)
Min. Shipping Days ： 7 Days -
TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model
MISUMI
A single tool with high efficiency that's capable of all centering, chamfering and V grooving- Volume Discount
Starting from∗ ： 39.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide NC Spot Drill
MISUMI
The non-coated design allows the edge of the tip to stand, achieving the high cut-off performance.- Volume Discount
Starting from∗ ： 43.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long
MISUMI
Carbide center drill that's ideal for centering in mass production drilling- Volume Discount
Starting from∗ ： 51.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Center Drill, 90° Chamfering Model
MISUMI
Carbide center drill that's ideal for centering in mass production drilling- Volume Discount
Starting from∗ ： 68.24 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack
MISUMI
A carbide countersink that's essential in chamfering and deburring- Volume Discount
Starting from∗ ： 73.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model
MISUMI
A single tool with high efficiency that's capable of all centering, chamfering and V grooving- Volume Discount
Starting from∗ ： 21.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack
MISUMI
TiAlN coated type of the popular spot drill- Volume Discount
Starting from∗ ： 11.51 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel Center Drill, Regular Model
MISUMI
TiAlN coated type of the popular center drill- Volume Discount
Starting from∗ ： 12.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel Center Drill, Long Model
MISUMI
The adoption of TiAlN coating with excellent wear resistance allows for the long service life and high-speed cutting.- Volume Discount
Starting from∗ ： 20.08 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel Center Drill, 90° Chamfering Model
MISUMI
The 90° type that's simultaneously capable of chamfering- Volume Discount
Starting from∗ ： 11.67 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel Center Drill, R Model
MISUMI
R-shaped type that's ideal for precision machining- Volume Discount
Starting from∗ ： 12.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiN Coated High-Speed Steel Countersink / 3-Flute / 90°
MISUMI
Necessities in hole chamfering and deburring are available at low prices- Volume Discount
Starting from∗ ： 22.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model
MISUMI
Ideal for the hole chamfering of countersunk bolts with 90° chamfer.- Volume Discount
Starting from∗ ： 23.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel Countersink, 1-Flute / 90°
MISUMI
1-flute type with high versatility in countersink- Volume Discount
Starting from∗ ： 22.70 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel Countersink, with Holes / 90°
MISUMI
It is effective in hole chamfering and deburring of light metals.- Volume Discount
Starting from∗ ： 22.10 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiN-Coated High-Speed Steel Countersink, with Holes / 90°
MISUMI
Frequently used standard sizes are offered at affordable pricesStarting from∗ ： 21.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiN-Coated High-Speed Steel Center Drill, Regular Model
MISUMI
Frequently used standard sizes are offered at affordable pricesStarting from∗ ： 10.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
MISUMI
[Features]
・MISUMI's original inner radius cutter specialized for machining high hardness steel.
・Ideal for high hardness steel inner radius machining up to 65 HRC.
・High-efficiency machining is possible by adopting a 4-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 60.85 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 34.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 32.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 43.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Inner Radius Cutter, 2-Flute
MISUMI
[Features]
・An essential item for corner rounding.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 41.04 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
MISUMI
[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 42.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set | TS coated carbide chamfering end mill, 2-flute / short model | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | TS coated carbide chamfering end mill, 3-flute / short model | TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short | TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model | TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long | TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack | TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model | TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack | TiAlN Coated High-Speed Steel Center Drill, 90° Chamfering Model | TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model | XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type | ||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||
| Starting from∗ | 93.10 € *Unit price with basic configuration | 56.49 € *Unit price with basic configuration Volume Discount | 38.81 € *Unit price with basic configuration Volume Discount | 36.12 € *Unit price with basic configuration Volume Discount | 52.47 € *Unit price with basic configuration Volume Discount | 38.75 € *Unit price with basic configuration Volume Discount | 48.89 € *Unit price with basic configuration Volume Discount | 40.79 € *Unit price with basic configuration Volume Discount | 46.59 € *Unit price with basic configuration Volume Discount | 41.04 € *Unit price with basic configuration Volume Discount | 40.53 € *Unit price with basic configuration Volume Discount | 46.23 € *Unit price with basic configuration Volume Discount | - | 39.21 € *Unit price with basic configuration Volume Discount | 43.60 € *Unit price with basic configuration Volume Discount | 51.22 € *Unit price with basic configuration Volume Discount | 68.24 € *Unit price with basic configuration Volume Discount | 73.90 € *Unit price with basic configuration Volume Discount | 21.59 € *Unit price with basic configuration Volume Discount | 11.51 € *Unit price with basic configuration Volume Discount | 12.22 € *Unit price with basic configuration Volume Discount | 20.08 € *Unit price with basic configuration Volume Discount | 11.67 € *Unit price with basic configuration Volume Discount | 12.22 € *Unit price with basic configuration Volume Discount | 22.75 € *Unit price with basic configuration Volume Discount | 23.33 € *Unit price with basic configuration Volume Discount | 22.70 € *Unit price with basic configuration Volume Discount | 22.10 € *Unit price with basic configuration Volume Discount | 21.87 € *Unit price with basic configuration | 10.00 € *Unit price with basic configuration | 60.85 € *Unit price with basic configuration Volume Discount | 34.92 € *Unit price with basic configuration Volume Discount | 32.62 € *Unit price with basic configuration Volume Discount | 43.97 € *Unit price with basic configuration Volume Discount | 41.04 € *Unit price with basic configuration Volume Discount | 42.86 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 7 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||
| Application | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Centering (Positioning) | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Centering (Positioning) | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal |
| Tip angle (θ) | - | 60 ～ 120 | 60 ～ 120 | 90 ～ 120 | - | - | 90 | 90 | 90 | - | - | 60 ～ 120 | 60 ～ 160 | 60 ～ 120 | - | - | - | - | 90 | 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Diameter (D)(mm) | 6.3/8.3/10.4/12.4/16.5/20.5 | 3 ～ 16 | 3 ～ 12 | 2 ～ 12 | - | - | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | - | - | 10 ～ 25 | 10 ～ 25 | 0.5 ～ 2 | 0.3 ～ 2 | 0.5 ～ 5 | 1 ～ 4 | 6.3 ～ 20.5 | 3 ～ 12 | 2 ～ 12 | 1 ～ 4 | 1 ～ 4 | 1 ～ 4 | 1 ～ 4 | 6.3 ～ 20.5 | 6.3 ～ 20.5 | 10 ～ 25 | 10 ～ 25 | 10 ～ 35 | 1 ～ 4 | - | - | - | - | - | - |
| work material | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] |
| Single blade, two blades | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Double-edged | Double-edged | Single blade | Single blade | Single blade | Double-edged | Double-edged | Double-edged | Double-edged | Single blade | Single blade | Single blade | Single blade | Single blade | Double-edged | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | N/A | N/A | Available | N/A | Available | N/A | Available | N/A | Available | N/A | N/A | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | N/A | Available | N/A | N/A |
| Tool Material Type | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | Available | Available / N/A | Available | N/A | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | TiN | TS | TS | TiAlN | AlCrN | AlCrN | TS | TS | TS | TS | - | - | TiCN | TiAlN | - | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiN | TiAlN | TiAlN | TiAlN | TiN | TiN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | TS |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | 0.1 ～ 5 | 0.2 ～ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Application
-
Tip angle (θ)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1–6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.6～3.35
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2–10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3~14
- 3 to 15
- 3.1
- 3.15
- 3.17
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.92
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 9.53
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 15.88
- 16
- 16.15
- 16.3
- 16.5
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- 25.0(+0.3)
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Brand
-
- MISUMI (36)
- FUJIGEN (60)
- IWATA TOOL (29)
- GUHRING (23)
- MAKOTOLOY (22)
- OSG (18)
- THE CUT (12)
- BIG KAISER (7)
- ILIX (7)
- KYOWA SEIKO (7)
- SANKO MFG (7)
- EIKOSHA (6)
- FUKUDA (5)
- OKAZAKI SEIKO (4)
- YAMAWA MFG (4)
- ASAHI TOOLS (3)
- NAKAJIMAKOUKI (3)
- SANDVIK (3)
- TRUSCO NAKAYAMA (3)
- DAIICHITOOL (2)
- DIJET (2)
- NOGAJAPAN (2)
- NINE9 (2)
- 7 LEADERS (1)
- NT TOOL (1)
- SPEED TIGER (1)
- UNION TOOL (1)
- NS TOOL (0)
- MAPAL (0)
- RYOCO SEIKI (0)
- STAR-M (0)
- WALTER TITEX (0)
- SKC (0)
- ESCO (0)
- WERA (0)
- WATERMILLS (0)
- METABO (0)
- ALPEN (0)
- DIXI (0)
- REX TOOLS (0)
- ATOM (0)
- WOLFCRAFT (0)
- TAIYO-TOOL (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Chamfering / Centering Tools
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.