- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
NABEYA Jigs for Manual Tightening（Page 3）
Search by sub-category
Clamping Parts (for Manual Tightening)
Clamp Units (for Manual Tightening)
Locating Elements (for Positioning Parts / Manual Tightening)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Ballpoint Jack
NABEYA
The point contact enables quick centering and support with black scale surfaces.Starting from∗ ： 118.72 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Magnetic Jack
NABEYA
The main body has a built-in magnet and can be used for both horizontal and vertical machines. Lightweight as it is made of aluminum.Starting from∗ ： 218.06 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 29.85 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Ceramic Adsorption Table
NABEYA
[Features]
· Convenient for adsorption of green sheet, polyimide film, light/soft materials and thin materials.
· It is a porous ceramics adsorption table.
· The average pore diameter is 55 μm, which is smaller than the hole diameter made by machining, reducing the amount of distortion of the adsorbate.
· There is no need to worry about dust generated within the ceramic.
· It is made of ceramic and SUS, providing high rust resistance.
· Clogging and chipping of ceramic can be repaired as wellStarting from∗ ： 1,479.84 € Min. Shipping Days ： 43 Days *Unit price with basic configuration
-
Nut Runner Clamp Large Base
NABEYA
[Features]
· Mounting base for Nut Runner large model.
· It consists of three blocks.
· The height can be changed depending on the combination.
· Mounting bolts, connection bolts (hex socket bolts) includedStarting from∗ ： 237.62 € Min. Shipping Days ： 43 Days *Unit price with basic configuration
-
Nut Runner Clamp Small Base
NABEYA
[Features]
· Mounting base for Nut Runner small model.
· It consists of three blocks.
· The height can be changed depending on the combination.
· Mounting bolts, connection bolts (hex socket bolts) includedStarting from∗ ： 244.94 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Nut Runner Clamp Small Model
NABEYA
[Features]
· Torque control and speedy clamping can be performed by using Nut Runner.
· Quasi-hydraulic operability, no piping is required so it is handy to use.
· Use Nut Runner for speedy clamping.
· Clamp cover rotates 90 degrees (rotation direction can be chosen).
· Free from troubles such as oil leakage as it does not use oil.Starting from∗ ： 510.71 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Clamp Bar for Nut Runner Clamp Small Model
NABEYA
[Features]
· Clamp bar for Nut Runner small model.
· With hex socket set screws for positioning (rod tip).
· NRCS-03C/06C/10C: Can be used immediately after purchase.
· NRCSS-03CS/06CS/10CS: A material type to be processed by the customerStarting from∗ ： 89.18 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Height Setting Jack (with Magnetic Base)
NABEYA
[Features]
· Hole included in upper center (φ12).
· Attachment for E-756 jack can also be used.
· Bearing is embedded in thread component.
· Includes magnetic baseStarting from∗ ： 363.79 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Heavy Type Screw Jack
NABEYA
A screw jack for large workpieces. The manufacturer has a product lineup with a maximum load capacity of 40 KN to 80 KN and a minimum height of 200 mm to a maximum of 1,250 mm.Starting from∗ ： 548.65 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Injeck Clamp
NABEYA
[Features]
· The body is made of bainite cast iron and does not get damaged even in excessive tightening.
· Can also be used for metal press clamps and the metal working clamps of injection molding machines.
· If a T-slot nut is used, then of course it can also be used with T-groove tables- Volume Discount
Starting from∗ ： 37.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Injeck Clamp Q Model
NABEYA
Mold bases can be clamped very fast. Clamp and step block are connected so they will not become lost. Opened clamp slot allows easy insertion and removal from the side.- Volume Discount
Starting from∗ ： 66.09 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Screw Jack
NABEYA
· Attachment for No. E-9175A can be used for SJK type.
· SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.- Volume Discount
Starting from∗ ： 33.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Point Jack
NABEYA
Convenient for positioning narrow workpiece parts, or as a stopper, etc. Nuts are included for all products.- Volume Discount
Starting from∗ ： 12.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Height Block
NABEYA
Material is Gusseisen mit Kugelgraphit450, and heat treatment is yakizen.
Useful for bulking up large workpieces and as a clamp table.Starting from∗ ： 451.13 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Locate Plate
NABEYA
Material is EN 1.1206 Equiv., Heat treatment is hardening, Surface treatment is black oxide coating.
Helps with positioning.Starting from∗ ： 96.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 29.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Guide Block (Straight Type)【2 Pieces Per Package】
NABEYA
Can be used where the groove width of the fixed object and table is the same. When the groove width is different, use the E-605 guide block (stepped) and E-275B guide block.- Volume Discount
Starting from∗ ： 43.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 33.41 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Straight Pin
NABEYA
Slight chamfering is given for φ3 to φ5 and chamfering of C0.3 to 0.5 for φ6 or higher.- Volume Discount
Starting from∗ ： 7.51 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Height Cylinder
NABEYA
SCM 420/11279-08002 to 08020: Quenched HRC57 ±3/11279-10002 to 51150: Quenched HRC60 ±3 height cylinder.- Volume Discount
Starting from∗ ： 26.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flange Locating Pin (Round
NABEYA
Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)- Volume Discount
Starting from∗ ： 72.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Reference Seat (Flange Provided)
NABEYA
[Features]
· Specification with air holes can be used to verify seating (O-ring not included).
· The diameter of the workpiece support is large, allowing load from the top to be firmly supported- Volume Discount
Starting from∗ ： 53.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Reference Seat (Air Hole with Flange Provided)
NABEYA
Specification with air holes can be used to verify seating (O-ring not included). The seating diameter is small, thanks to a space-saving design that makes it possible to use in narrow places.- Volume Discount
Starting from∗ ： 74.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Reference Seat (Round Seat)
NABEYA
Material is EN 1.7264 Equiv., Heat treatment is Hardening HRC60±3, and Surface treatment is black oxide coating, Standard seat (round seat).- Volume Discount
Starting from∗ ： 55.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rough Guide L-Plate for Q Lock
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Good workability due to large guide part. Mounts onto the top surfaces of the mother jig for minimal interference with surroundings.- Volume Discount
Starting from∗ ： 36.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Extension Tool for Q Lock (Side Type)
NABEYA
Main body: S45C / Hex joint: SCM440, Hexagonal joint part: Hardened HRC52 to 58 / Joint bar (double-end surface): Induction hardened HRC36 to 44, Q-lock element side operated type extension tool.- Volume Discount
Starting from∗ ： 80.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rough Guide for Q Lock (Side Type)
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.Starting from∗ ： 108.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Rough Guide L-Plate for Q Lock (Side Type)
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Good workability due to large guide part. Mounts onto the top surfaces of the mother jig for minimal interference with surroundings.- Volume Discount
Starting from∗ ： 36.65 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Q Lock (Screw Type) Clamp Pin
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.Starting from∗ ： 110.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Q Lock (Screw Type) Diamond Pin
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.Starting from∗ ： 139.42 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Q Lock (Screw Type) Locating Pin
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.Starting from∗ ： 120.70 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Q Lock (Screw Type) Locating Bushing
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.Starting from∗ ： 109.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Q Lock Coupling Socket
NABEYA
A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.Starting from∗ ： 147.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Q Lock Coupling Plug
NABEYA
A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.Starting from∗ ： 174.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 104.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 122.27 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 115.44 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Height Cylinder for Q Lock
NABEYA
Install it between the pitches of the Q-lock element to prevent deflection and chattering of the jig base.- Volume Discount
Starting from∗ ： 45.67 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rough Guide for Q Lock
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.- Volume Discount
Starting from∗ ： 71.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Rough Guide Pin for Q Lock
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.- Volume Discount
Starting from∗ ： 39.18 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V Block Guide Block【2 Pieces Per Package】
NABEYA
For installation, use E-660 socket screws (sold separately).- Volume Discount
Starting from∗ ： 26.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 45.94 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Guide Block (Open Type)【2 Pieces Per Package】
NABEYA
After setting the fixed object in the given position, place the guide block in the T-groove to position.- Volume Discount
Starting from∗ ： 43.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Guide Block (Stepped Type)【2 Pieces Per Package】
NABEYA
It is screw-fastened on a fixed object or vise with 20 mm key groove. Can be used in any machine with varied guide block sizes available.Starting from∗ ： 86.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 118.72 € *Unit price with basic configuration | 218.06 € *Unit price with basic configuration | 29.85 € *Unit price with basic configuration Volume Discount | 1,479.84 € *Unit price with basic configuration | 237.62 € *Unit price with basic configuration | 244.94 € *Unit price with basic configuration | 510.71 € *Unit price with basic configuration | 89.18 € *Unit price with basic configuration | 363.79 € *Unit price with basic configuration | 548.65 € *Unit price with basic configuration | 37.11 € *Unit price with basic configuration Volume Discount | 66.09 € *Unit price with basic configuration Volume Discount | 33.86 € *Unit price with basic configuration Volume Discount | 12.22 € *Unit price with basic configuration Volume Discount | 451.13 € *Unit price with basic configuration | 96.21 € *Unit price with basic configuration | 29.07 € *Unit price with basic configuration Volume Discount | 43.20 € *Unit price with basic configuration Volume Discount | 33.41 € *Unit price with basic configuration Volume Discount | 7.51 € *Unit price with basic configuration Volume Discount | 26.36 € *Unit price with basic configuration Volume Discount | 72.38 € *Unit price with basic configuration Volume Discount | 53.55 € *Unit price with basic configuration Volume Discount | 74.20 € *Unit price with basic configuration Volume Discount | 55.00 € *Unit price with basic configuration Volume Discount | 36.34 € *Unit price with basic configuration Volume Discount | 80.16 € *Unit price with basic configuration Volume Discount | 108.23 € *Unit price with basic configuration | 36.65 € *Unit price with basic configuration Volume Discount | 110.57 € *Unit price with basic configuration | 139.42 € *Unit price with basic configuration | 120.70 € *Unit price with basic configuration | 109.00 € *Unit price with basic configuration | 147.60 € *Unit price with basic configuration | 174.12 € *Unit price with basic configuration | 104.83 € *Unit price with basic configuration | 122.27 € *Unit price with basic configuration | 115.44 € *Unit price with basic configuration | 45.67 € *Unit price with basic configuration Volume Discount | 71.91 € *Unit price with basic configuration Volume Discount | 39.18 € *Unit price with basic configuration Volume Discount | 26.41 € *Unit price with basic configuration Volume Discount | 45.94 € *Unit price with basic configuration Volume Discount | 43.92 € *Unit price with basic configuration Volume Discount | 86.77 € *Unit price with basic configuration |
| Min. Shipping Days ： | 7 Days | 8 Days | 7 Days | 43 Days | 43 Days | 7 Days | 7 Days | 7 Days | 8 Days | 7 Days | 5 Days | 7 Days | 5 Days | 5 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 5 Days | 6 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 5 Days | 6 Days | 5 Days |
Loading...
Categories related to Jigs for Manual Tightening
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.