SANDVIK Holding Tools for O.D. Tuning（Application：Chamfer）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 106.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 198.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 144.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 573.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 120.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 245.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 268.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 244.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 381.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 387.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 467.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shank Tool Bit T-Max P Lever Clamp PCLNR / L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 123.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shank Tool Bit T-Max P Lever Clamp PDJNR / L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 150.68 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 234.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 381.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 285.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 272.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 272.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 658.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 313.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 387.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 402.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 368.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,138.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 245.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 438.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 438.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 352.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 393.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 352.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 391.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 245.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 839.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 486.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 798.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 713.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 658.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 658.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 120.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 198.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 171.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 198.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 171.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 427.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 368.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Tip Shape |
| Application |
| Clamp Shape |
| Cutting Direction |
| Applicable Tip Clearance Angle Type |
| Shank height(mm) |
| Shank width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR / L -2 | Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP | Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR / L-S | CoroTurn HP, SL Cutting Head, Outer Diameter Turning, SL-PDJNR/L-15HP | CoroTurn HP SL Cutting Head For Outer Diameter Turning, TR-SL-D13JCR / L-HP-X | CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR / L.-HP | Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRDCN | Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN / BL | Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL | Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4 | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CDJNR/L-15-4 | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2 | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DDJNR/L-15-2 | Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12 | Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP | Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SVMBR/L-HP | Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP | Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-HP | Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDMNR/L-15HP | Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCACR / L-S | Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR / L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR / L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR / L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR / L -4 | Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR / L-HP | ||||||||||||||||||||
| Starting from∗ | 106.83 € *Unit price with basic configuration | 198.84 € *Unit price with basic configuration | 144.64 € *Unit price with basic configuration | 573.21 € *Unit price with basic configuration | 120.09 € *Unit price with basic configuration | 245.81 € *Unit price with basic configuration | 268.83 € *Unit price with basic configuration | 244.52 € *Unit price with basic configuration | 381.99 € *Unit price with basic configuration | 387.59 € *Unit price with basic configuration | 467.15 € *Unit price with basic configuration | 123.97 € *Unit price with basic configuration | 150.68 € *Unit price with basic configuration | 234.80 € *Unit price with basic configuration | 381.99 € *Unit price with basic configuration | 285.36 € *Unit price with basic configuration | 272.86 € *Unit price with basic configuration | 272.86 € *Unit price with basic configuration | 658.08 € *Unit price with basic configuration | 313.91 € *Unit price with basic configuration | 387.59 € *Unit price with basic configuration | 402.51 € *Unit price with basic configuration | 368.00 € *Unit price with basic configuration | 1,138.46 € *Unit price with basic configuration | 245.81 € *Unit price with basic configuration | 438.90 € *Unit price with basic configuration | 438.90 € *Unit price with basic configuration | 352.44 € *Unit price with basic configuration | 393.26 € *Unit price with basic configuration | 352.44 € *Unit price with basic configuration | 391.32 € *Unit price with basic configuration | 245.81 € *Unit price with basic configuration | 839.04 € *Unit price with basic configuration | 486.46 € *Unit price with basic configuration | 798.00 € *Unit price with basic configuration | 713.13 € *Unit price with basic configuration | 658.08 € *Unit price with basic configuration | 658.08 € *Unit price with basic configuration | 120.09 € *Unit price with basic configuration | 198.84 € *Unit price with basic configuration | 171.20 € *Unit price with basic configuration | 198.84 € *Unit price with basic configuration | 171.20 € *Unit price with basic configuration | 427.29 € *Unit price with basic configuration | 368.00 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Applicable Tip Shape | S (Rectangular) | S (Rectangular) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | Other | D (55° Diamond-Shape) | C (80° Diamond-Shape) | S (Rectangular) | S (Rectangular) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | R (Circular) | C (80° Diamond-Shape) / V (35° Diamond-Shaped) / R (Circular) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | S (Rectangular) | D (55° Diamond-Shape) |
| Application | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer |
| Clamp Shape | Cable clamp | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Cable clamp | Cable clamp | Clamp-on | Lever lock | Lever lock | Lever lock | Lever lock | - | - | - | - | - | - | Lever lock | Clamp-on | Lever lock | - | Clamp-on | Clamp-on | Cable clamp | Clamp-on | Clamp-on | Cable clamp | Cable clamp | Double Clamp | - | - | Clamp-on | Lever lock | Lever lock | Lever lock | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Pin Lock | Pin Lock |
| Cutting Direction | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Left-hand / No-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand |
| Applicable Tip Clearance Angle Type | Negative | - | Negative | Pozidriv | Pozidriv | Pozidriv | Negative | - | - | - | - | Negative | Negative | Negative | - | - | - | - | - | - | - | - | - | - | Pozidriv | - | - | - | - | - | - | Negative | - | - | - | - | - | - | Pozidriv | - | - | - | - | Negative | Negative |
| Shank height(mm) | 20 ～ 40 | 25 | 25 | - | 8 ～ 16 | - | 40 | 32 | - | - | - | 20 | 40 ～ 50 | 40 | - | - | - | - | - | - | - | - | - | 0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ～ 16 | 32 | 25 ～ 32 | 25 | 25 ～ 32 | - | - |
| Shank width(mm) | 20 ～ 40 | 25 | 25 | - | 8 ～ 16 | - | 25 | 32 | - | - | - | 20 | 25 ～ 32 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ～ 16 | 25 ～ 32 | 25 ～ 32 | 25 | 25 | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Tip Shape
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Cutting Direction
- Right-hand
- Left-hand
- No-hand
-
Applicable Tip Clearance Angle Type
- Negative
- Pozidriv
-
Shank height(mm)
-
Shank width(mm)
Narrow search by specifying Brand
-
- SANDVIK (76)
- KYOCERA (8)
- SUMITOMO ELECTRIC HARDMETAL (0)
- NGK SPARK PLUG (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for O.D. Tuning
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.