SANDVIK Holding Tools for I.D. Tuning（Page 4）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 435.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 223.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CORO-TURN SL, Vibration-Proof Boring Bit
SANDVIK
CoroTurn SL is a modular system of adapters and cutting heads that enables the construction of customised tools for a variety of turning operations with a minimum number of partsStarting from∗ ： 3,338.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroCut MB Solid Carbide Boring Tool Bit MB-A
SANDVIK
[Features]
Holder for inner-diameter turning (bore cutting) of small parts.
The EasyFix sleeve makes center-height alignment easy and ensures excellent rigidity.
Switch out the insert to use for grooving, threading, turning, profiling and face grooving operations.
Minimum machining diameter: ø10 mm.
For small inner-diameter turning (bore cutting) operations.Starting from∗ ： 197.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SCLCR / L-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 362.20 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 456.07 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-ERX-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For back boring machining.Starting from∗ ： 208.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-X
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For back boring machining.Starting from∗ ： 277.34 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 189.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDXCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 189.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR / L-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 198.00 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 265.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-STFCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 198.00 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
CoroTurn 107, Boring Tool Bit for Turning
SANDVIK
[Features]
·Inner diameter boring tool bit with low cutting force
·The internal coolant ensures longer insert lifespan and good cutting chip handling
·High tool rigidity ensures stable machining operations even with workpieces with long protrusions
[Applications]
·For inner diameter turning operationsStarting from∗ ： 198.00 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR / L-E
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 211.52 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVUBR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 242.49 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L-ER
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Starting from∗ ： 454.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Starting from∗ ： 803.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR / L-R
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Starting from∗ ： 806.06 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...SWLPR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Boring Bit CoroTurn RC Double Clamp A-DSKNR / L
SANDVIK
[Features]
A highly-rigid double clamp boring bit for inner diameter lathe turning
Supports the use of internal coolant
High tool rigidity
Supports inner-diameter turning (bore cutting) and the use of negative inserts
Supports everything from roughing through to finishingStarting from∗ ： 411.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Bit CoroTurn RC Double Clamp A-DWLNR / L
SANDVIK
[Features]
A highly-rigid double clamp boring bit for inner diameter lathe turning
Supports the use of internal coolant
High tool rigidity
Supports inner-diameter turning (bore cutting) and the use of negative inserts
Supports everything from roughing through to finishingStarting from∗ ： 453.26 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
CoroTurn SL, 570 Type T-Max P, Head for Back Boring
SANDVIK
[Features]Cutting head for inner diameter turning with a replaceable head. Excellent insert clamping rigidity due to the double clamping. Quick head changes are possible, reducing downtime. Inner diameter turning operations.Starting from∗ ： 479.94 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DDXNR / L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner diameter cutting.
Being a double clamp gives it excellent insert-clamping rigidity.
The heads can be quickly changed out, helping reduce down time.
Inner-diameter turning (bore cutting) operations.Starting from∗ ： 462.06 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DSKNR / L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner diameter cutting.
Being a double clamp gives it excellent insert-clamping rigidity.
The heads can be quickly changed out, helping reduce down time.
Inner-diameter turning (bore cutting) operations.Starting from∗ ： 435.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DWLNR / L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner diameter cutting.
Being a double clamp gives it excellent insert-clamping rigidity.
The heads can be quickly changed out, helping reduce down time.
Inner-diameter turning (bore cutting) operations.Starting from∗ ： 455.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 242.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit T-Max P Lever Clamp S...-PDUNR / L
SANDVIK
[Features]
An easy-handling inner-diameter boring tool bit with excellent repeatability.
The use of internal coolant improves the handling of cutting chips and gives the inserts a longer service life.
Supports inner-diameter turning (bore cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 413.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit T-Max P Lever Clamp S...PTFNR / L-W
SANDVIK
[Features]
An easy-handling inner-diameter boring tool bit with excellent repeatability.
Supports inner-diameter turning (bore cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 482.72 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 304.25 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR / L
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Starting from∗ ： 804.90 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn SL Shank Adapter 570-NG
SANDVIK
[Features]
An interchangeable-head-type turning bit.
Has fewer tool points making inventory management easy and allowing the selection of multiple types of cutting unit.
For outer diameter turning of all types of work material.Starting from∗ ： 223.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Turning CXS-..T090
SANDVIK
[Features]
CoroTurn XS Insert Bar
Solid-carbide coating
Boring bit for small-diameter machining
For turningStarting from∗ ： 53.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 56.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 58.03 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Profiling CXS-..TE98 Profiling
SANDVIK
[Features]
CoroTurn XS insert bar
Solid-carbide coating
Boring bit for small-diameter machining
For profilingStarting from∗ ： 59.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Tip Shape |
| Minimum Machining Diameter |
| Application |
| Cutting Direction |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank diameter |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SCLCR / L-R | Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SDUCR / L-R | Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-ERX-R | Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-X | Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR / L-R | Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR / L-E | Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L-ER | Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SDUPR / L-ER | Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER | Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR / L-R | CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DDXNR / L | CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DSKNR / L | CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DWLNR / L | CoroTurn XS Insert Bar For Turning With Chip Breaker CXS-..T098 | |||||||||||||||||||||||||||||||
| Starting from∗ | 435.21 € *Unit price with basic configuration | 223.14 € *Unit price with basic configuration | 3,338.27 € *Unit price with basic configuration | 197.64 € *Unit price with basic configuration | 362.20 € *Unit price with basic configuration | 456.07 € *Unit price with basic configuration | 208.98 € *Unit price with basic configuration | 277.34 € *Unit price with basic configuration | 189.52 € *Unit price with basic configuration | 189.52 € *Unit price with basic configuration | 198.00 € *Unit price with basic configuration | 265.81 € *Unit price with basic configuration | 198.00 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 198.00 € *Unit price with basic configuration | 211.52 € *Unit price with basic configuration | 242.49 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 454.73 € *Unit price with basic configuration | 803.22 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 806.06 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 411.31 € *Unit price with basic configuration | 453.26 € *Unit price with basic configuration | 479.94 € *Unit price with basic configuration | 462.06 € *Unit price with basic configuration | 435.21 € *Unit price with basic configuration | 455.66 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 242.84 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 413.19 € *Unit price with basic configuration | 482.72 € *Unit price with basic configuration | 304.25 € *Unit price with basic configuration | 804.90 € *Unit price with basic configuration | 223.14 € *Unit price with basic configuration | 53.87 € *Unit price with basic configuration | 56.57 € *Unit price with basic configuration | 58.03 € *Unit price with basic configuration | 59.21 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 14 Days | 6 Days | 6 Days | 14 Days | 6 Days | 12 Days | 14 Days | 8 Days | 14 Days | 8 Days | 14 Days | 6 Days | 6 Days | 14 Days | 14 Days | 8 Days | 14 Days | 6 Days | 14 Days | 14 Days | 14 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days |
| Applicable Tip Shape | C (80° Diamond-Shape) | - | - | - | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) / T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | W (Hexagonal Type) | S (Rectangular) | W (Hexagonal Type) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | W (Hexagonal Type) | R (Circular) | S (Rectangular) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | - | - | - | - | - |
| Minimum Machining Diameter | 57 | - | - | - | 10 | 15 ～ 22 | 22 ～ 27 | 33 | 20 ～ 32 | 20 ～ 32 | 20 | 32 ～ 40 | 11 | 22 | 11 ～ 50 | 22 | 27 ～ 33 | 18 ～ 20 | 15 ～ 20 | 15 ～ 18 | 15 ～ 32 | 22 | 13 ～ 16 | 8.5 ～ 12 | 32 | 40 ～ 50 | 50 | 40 | 55 | 50 | 20 ～ 40 | 40 ～ 50 | 20/30 ～ 60/75 | 20 ～ 55 | 20 ～ 50 | 20 ～ 50 | 32 ～ 63 | 50 | 8.5 ～ 20 | 13 ～ 16 | - | 5.2 | 5.2 ～ 7.2 | 5.2 ～ 7.2 | 4.2 ～ 6.2 |
| Application | Internal Diameter | Internal Diameter | - | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling |
| Cutting Direction | Left-hand | Right-hand / Left-hand | - | - | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand |
| Clamp Shape | Cable clamp | - | - | - | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | - | - | Screw-on | Screw-on | - | Screw-on | Lever lock | Lever lock | Screw-on | Screw-on | - | - | - | - | - |
| Overall Length L1 | 42 | 113.65 ～ 154 | 620 | - | 125 | 150 ～ 200 | 200 ～ 250 | 312.2 | 200 ～ 300 | 200 ～ 300 | 200 | 300 | 100 | 200 | 125 ～ 300 | 200 | 250 ～ 300 | 150 ～ 200 | 150 ～ 200 | 150 ～ 180 | 125 ～ 300 | 204.6 | 150 ～ 180 | 80 ～ 125 | 300 | 300 | - | - | - | - | 25 ～ 50 | 50.1 ～ 55.3 | 25 ～ 63 | 25 ～ 63 | 24.2 ～ 54.4 | 25.5 ～ 57.2 | 300 ～ 400 | 400 | 100 ～ 200 | 150 ～ 180 | 103 ～ 152 | 32.25 ～ 42.25 | 37.25 ～ 62.25 | 32.25 ～ 62.25 | 37.26 ～ 52.25 |
| Clearance angle | - | - | - | - | 7° | 7° | 7° | 7° | 7° | 7° | 7° | 7° | 7° | 7° | 5° / 7° | 7° | 5° | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 0° | 0° | 0° | 0° | - | 0° | - | - | - | - | - | - | 0° | - | 7° | 7° | - | - | - | - | - |
| Shank diameter | 40 | 32 ～ 40 | 60 | - | 8 | 10 ～ 16 | 16 ～ 20 | 25 | 16 ～ 25 | 16 ～ 25 | 16 | 25 ～ 32 | 8 | 16 | 10 ～ 40 | 16 | 20 ～ 25 | 12 ～ 16 | 10 ～ 16 | 10 ～ 12 | 10 ～ 25 | 16 | 10 ～ 12 | 6 ～ 10 | 25 | 32 ～ 40 | 40 | 32 | 40 | 40 | - | - | - | - | - | - | 25 ～ 50 | 40 | 6 ～ 16 | 10 ～ 12 | 25 ～ 40 | 5 | 5 ～ 7 | 5 ～ 7 | 4 ～ 6 |
| Protrusion length (L/D) | - | - | - | - | 48 | 60 ～ 96 | 24～64 ～ 80 | 15–40 | 64 ～ 100 | 64 ～ 100 | 24～64 | 100 ～ 128 | 9 to 24 | 24～64 | 15–40 ～ 160 | 24～64 | 30~80 ～ 100 | 18～48 ～ 24～64 | 60 ～ 96 | 60–100 ～ 120 | 15–40 ～ 37.5～100 | 24～64 | 100 ～ 120 | 9 to 24 ～ 15–40 | 37.5～100 | 48～128 ～ 60～160 | 20 | 20 | 36 | 36 | - | - | - | - | - | - | 100 ～ 200 | 160 | 36 ～ 64 | 100 ～ 120 | - | - | - | - | - |
| Lubrication Hole Y/N | Available | Available | Available | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available / N/A | Available | Available | Available | Available | N/A | Available | Available | N/A | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | N/A | Available | N/A | Available | N/A | Available | N/A | N/A | N/A | N/A |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Tip Shape
-
Minimum Machining Diameter
- 0.3
- 0.5
- 0.6
- 0.9
- 1
- 1.5
- 1.95
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 4.5
- 5
- 5.0 mm
- 5.2
- 5.5
- 6
- 6.0 mm
- 6.2
- 6.5
- 6.604
- 7
- 7.2
- 7.5
- 8
- 8.0 mm
- 8.2042
- 8.5
- 8.6868
- 9
- 10
- 10.0 mm
- 10.2108
- 10.4902
- 11
- 12
- 12.0 mm
- 12.192
- 12.7
- 13
- 14
- 14.0 mm
- 15
- 15.1892
- 16
- 16.3068
- 17
- 17.2974
- 18
- 18.0 mm
- 18.4912
- 18.9992
- 19
- 19.6088
- 19.9898
- 20
- 20/30
- 20.1
- 20.62
- 21
- 21.59
- 22
- 23
- 23.5966
- 24.892
- 24.9
- 24.99
- 24.9936
- 24.994
- 25
- ø25
- 25/37
- 25.4
- 25.7048
- 26
- 26.01
- 26.6954
- 27
- 28
- 29
- 30
- 30.505
- 30.5054
- 31
- 31.496
- 31.5
- 31.801
- 32
- ø32
- 32.004
- 32.512
- 32.9946
- 32.995
- 33
- 33 mm
- 34
- 35
- 35.45
- 36.45
- 37
- 37.287
- 37.2872
- 37.313
- 37.45
- 38
- 38.1
- 38.45
- 38.913
- 39.45
- 40
- 40/55
- 40.005
- 40.01
- 40.1
- 40.1066
- 40.132
- 40.45
- 41
- 41.45
- 41.5
- 42.45
- 43
- 43.307
- 43.45
- 44
- ø44
- 44.45
- 44.704
- 45
- 45.0088
- 45.45
- 46
- 46.45
- 46.99
- 47
- 47.45
- 48
- 48.45
- 49.3014
- 49.45
- 50
- 50 mm
- 50/75
- 50.01
- 50.0126
- 50.038
- 50.45
- 50.8
- 51
- 51.45
- 52
- 52.45
- 53
- 53.45
- 54
- 54.0004
- 54.45
- 54.99
- 55
- 55.35
- 56
- 56.35
- 57
- 57.35
- 58.35
- 59.35
- 59.99
- 60
- 60/75
- 60.35
- 61.01
- 61.011
- 61.35
- 62
- ø62
- 62.35
- 62.992
- 63
- 63.35
- 63.5
- 63.98
- 64
- 64.35
- 64.7954
- 65
- 65.35
- 66.35
- 67.35
- 67.894
- 68
- 68.35
- 69
- 69.35
- 70
- 70/90
- 70.35
- 71.35
- 72
- 72.35
- 73.35
- 74.35
- 75
- 75.01
- 75.35
- 76.35
- 77.013
- 77.35
- 78.35
- 79.35
- 80
- 80.01
- 80.35
- 81.35
- 82.35
- 82.499
- 83
- 83.35
- 84.35
- 85
- 85.35
- 86
- 86.35
- 87.35
- ø88
- 88.35
- 89
- 89.35
- 90
- 90.35
- 98
- 99
- 99.9998
- 100
- 105
- 106
- 109
- 111.35
- 115
- 119.9896
- 120
- 123
- ø125
- 130
- 132.35
- 135
- 136
- 139.7
- 140
- 145
- 148
- 150
- 153.35
- 166
- 170
- 172.72
- 188
- 198
- 212
- 220
- 223.52
- 228
- 248
- 250
- 258
- 275
- 279.4
- 298
- 378
- 458
- 538
- 778
- 1018
-
Application
-
Cutting Direction
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Lever lock
- Wedge Lock
- Other
-
Overall Length L1
-
Clearance angle
-
Shank diameter
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Narrow search by specifying Brand
-
- SANDVIK (290)
- KYOCERA (86)
- BIG KAISER (9)
- NGK SPARK PLUG (9)
- MANYO TOOLS (6)
- SHOWA TOOL (1)
- THE CUT (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for I.D. Tuning
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.