Due to a temporary system error, the displayed tracking information within the online ordering system are currently wrong. Please track the displayed tracking number as follows. For shipments within Germany please track with GLS. For shipments to all other European countries, please track with TNT / FedEX. We are sorry for the inconvenience caused.
Important notice: Due to COVID-19 our costs for importing products to Europe have increased tremendously. Therefore, an additional freight cost surcharge of 11.50 Euros per delivery will be invoiced from May 1st, 2020 temporally. Find further information here.

Please assist us in our effort to improve this site.

Please give us a feedback on the MISUMI e-Catalog.

Your feedback

Your name (on a voluntary basis)

Your email address (on a voluntary basis)

Your phone number (on a voluntary basis)

We are sorry, but we cannot respond on each feedback.
Private and customer information will remain confidential in accordance with our privacy policy.

Thank you for your cooperation.

We are sorry, but we cannot respond on each feedback.
If you wish to receive our response,please use the inquiry form.
Private and customer information will remain confidential in accordance with our privacy policy.

TAKIRON Transparent Plastic Plates, Plastic Cover Panels

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship

Polycarbonate Plate PC

TAKIRON

Achieves superior impact strength and glass transparency. Note: Quoted from the 2013 Takiron comprehensive catalog.

[Features]
· Polycarbonate plates are made from materials with superior impact resistance, even among plastics.
· Plastic with a transparency equal to glass that refutes the common belief that transparent materials are easy to break.
· Possesses the highest level of impact-resistance strength while using transparent materials with approximately 20 times the strength of hard vinyl chloride and approximately 40 times the strength of acrylic.
· Superior light permeability rate of 85% for 5 mm transparent plate, the same transparency as high grade plate glass.
· Low thermal conductivity (1/5th of glass) and superior heat retention qualities. Useful for insulation.
· Can be used in a wide range of temperatures, from -40°C to +120°C.
· 1 mm thickness and resistant to high voltages of up to 30,000 volts. More than twice the insulating value as Bakelite. Optimal as electric insulation material.
· Weather-resistant grade that prevents yellowing and is barely affected by direct sunlight, wind, rain, temperatures, etc., when compared to other plastic materials. Quality can be selected based on application.
[Polycarbonate Processing Features]
1. Little change in load (creep) and easy drilling and cutting.
2. Vacuum forming and heat bending possible.
3. Cold forming by bending into a curve under temperatures below room temperature is possible.
· Food and Hygiene Law / UL certified product / Railway car compliance certified product.

Min. Shipping Days ： 6 Days
PVC Plate ESS

TAKIRON

Hard PVC plate optimal for a wide range of applications. Quoted from the 2013 Takiron plate comprehensive catalog.

[Features]
· Proven record having been adopted as the first T type in Japan.
· Extrusion plate with high thickness accuracy.
· Little loss of gloss or surface peeling even during heat processing. Long sizes are also possible

Min. Shipping Days ： 8 Days
PET Plate

TAKIRON

High functioning grade optimal for electronics, food and other industrial applications. Quoted from 2013 Takiron plate comprehensive catalog.

[Features]
· Material with low combustion calories even for plastics that does not generate poisonous halogen gases when burnt.
· Possesses high strength based on Charpy impact testing that is approximately five times the initial strength of general acrylic.
· Can be made thinner than conventional products depending upon the application.
· Petech is self-extinguishing, as opposed to acrylics which are highly flammable.
· Certified for superior flame retardance. Passed the materials combustion test for railroad cars.
· Does not turn white even when cold bent. Punching of thin objects as thin as 1.5 mm possible, whereas such punching is not possible with acrylics.
· Easier to form at low temperatures than acrylics when heated

Min. Shipping Days ： 6 Days

Min. Shipping Days ：	6 Days

Min. Shipping Days ：	8 Days

Min. Shipping Days ：	6 Days


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Material
Grade
Color
Hole Machining


Brand	TAKIRON	TAKIRON	TAKIRON
Product Series	Polycarbonate Plate PC	PVC Plate ESS	PET Plate
Starting from^∗	-	-	-
Min. Shipping Days ：	6 Days	8 Days	6 Days
Material	Polycarbonate (PC)	Vinyl Chloride (PVC)	PET
Grade	Standard	Standard	Standard
Color	Transparent	Transparent	Transparent
Hole Machining	No Drilling Alteration	No Drilling Alteration	No Drilling Alteration