- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Plain Bearing (Bushes)（Environment：Standard）
Filter products by: Type
-
Straight Type -
Shouldered Type -
Flanged -
Housing Unit Type
?* Information on days to ship and prices
-
Plain bearing bushes with flange / plastic (iglidur) / GFM
IGUS
All-around lubrication-free bushing that covers a wide range of different mating shaft material.
[Features]
・ No worry about running out of oil.
・ Maximum operating temperature +130°C, minimum operating temperature -40°C.
・ Economical bearing that is ideal for universal applications.
・ Maintenance-free and lubrication-free.
・ Excellent vibration damping.
・ High abrasion-resistance.
・ Resistant to dust.
・ Excellent cost-effectiveness.
・ Covers a wide range of different mating shaft material.
[Applications]
・ Compatible for universal applications.
・ For medium to high loads.
・ For low to medium speeds.
・ For rotation and rocking movements.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 2.44 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / plastic (iglidur) / GSM
IGUS
iglidur® G bearings cover an extremely wide range of different requirements – they are truly “all-round”. The material is ideal for universal applications, a truly “all-round”. Typical applications include medium to high loads, medium sliding speeds and medium temperatures.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 3.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / plastic (iglidur) / JFM
IGUS
One main advantage of iglidur® J plain bearings is the combination of a low coefficient of friction when running dry and the low stickslip tendency. With a recommended maximum surface pressure of 35 MPa, iglidur® J plain bearings are not suitable for extreme loads.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 2.62 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / plastic (iglidur) / JSM
IGUS
One main advantage of iglidur® J plain bearings is the combination of a low coefficient of friction when running dry and the low stickslip tendency. With a recommended maximum surface pressure of 35 MPa, iglidur® J plain bearings are not suitable for extreme loads.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 3.50 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / brass / solid lubricant / SPB
OILES
Demonstrates high performance at high load and low speed movement positions.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 11.48 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / plastic (iglidur) / M250 / MFM
IGUS
The self-lubricating plain bearing made from iglidur® M250 distinguishes itself through its impact strength, vibration dampening and wear resistance. They excel in applications in which vibration dampening is necessary, for example, in fitness and packaging machines.- Volume Discount
- 3D CAD data available
› Configure nowStarting from∗ ： 2.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / plastic (iglidur) / WFM
IGUS
iglidur® W300 gives excellent wear resistance, even in harsh environments or when used with rough shafts. Of all iglidur® materials, iglidur® W300 is the most resistant to these conditions.- Volume Discount
- 3D CAD data available
› Configure nowStarting from∗ ： 4.74 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / Bearphite / B-BRF
NTN
Unique material with natural high quality fine graphite powder added. Superior in silent properties.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 1.56 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / plastic (iglidur) / XFM
IGUS
iglidur® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 5.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / brass / solid lubricant / SPF
OILES
Demonstrates high performance at high load and low speed movement positions.- Volume Discount
- Stock
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 13.10 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / slotted / LFB
OILES
Can be used without oil, has thin walls, and is lightweight, and allows for a more compact size.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.67 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / plastic (iglidur) / WSM
IGUS
iglidur® W300 gives excellent wear resistance, even in harsh environments or when used with rough shafts. Of all iglidur® materials, iglidur® W300 is the most resistant to these conditions.- Volume Discount
- 3D CAD data available
› Configure nowStarting from∗ ： 1.23 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / plastic (iglidur) / M250 / MSM
IGUS
The self-lubricating plain bearing made from iglidur® M250 distinguishes itself through its impact strength, vibration dampening and wear resistance. They excel in applications in which vibration dampening is necessary, for example, in fitness and packaging machines.- Volume Discount
- 3D CAD data available
› Configure nowStarting from∗ ： 0.72 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / plastic (iglidur) / XSM
IGUS
iglidur® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 5.14 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / copper alloy / solid lubricant / JDB
ZOB
A copper alloy oil free bushing designed with cost in mind.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 2.71 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / sintered metal / 54B
OILES
Provides high friction resistance when oil film formation is discouraged due to reciprocating motion, intermittent operation, and swing motion.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 5.08 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / plastic (iglidur) / PFM
IGUS
Due to thermal stability and low water absorption, the iglidur® P bearings are among the most dimensionnally strong allround bearings under varying environmental conditions. iglidur® P bearings are recommended for oscillating and rotating movements at average loads.- Volume Discount
- 3D CAD data available
› Configure nowStarting from∗ ： 3.68 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / DBS02
DAIDO METAL
Oil-retaining bearing (flanged bushing) with self-lubricating characteristics.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.38 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / JFB
ZOB
A copper alloy flanged type oil free bushing designed with cost in mind.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 3.47 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / cast iron / 30B【1-10 Pieces Per Package】
OILES
Excellent oil film retention and superior abrasion/seize resistance can greatly reduce the number of times lubrication is necessary.- Volume Discount
- Stock
- 2D CAD data available
› Configure nowStarting from∗ ： 4.01 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / plastic / 80F
OILES
Can be used oil free and provides superior resistance to load and abrasion.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / brass / solid lubricant / SPBL
OILES
Demonstrates high performance at high load and low speed movement positions.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 25.05 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / thin-walled / 30B
OILES
Excellent oil film retention and superior abrasion/seize resistance can greatly reduce the number of times lubrication is necessary.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 9.51 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / composite material / 70B
OILES
Can be used without oil, has a low friction coefficient, and has exceptional load resistance.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 1.10 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / composite / slotted / LFF
OILES
Can be used without oil, has thin walls, and is lightweight, and allows for a more compact size.- Volume Discount
- Stock
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 1.09 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / sintered metal / 54F
OILES
Provides high friction resistance when oil film formation is discouraged due to reciprocating motion, intermittent operation, and swing motion.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 8.53 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / bronze / solid lubricant / BCB
OILES
Bronze bearings with embedded solid lubricant. Can be used without oil. Can be used at high temperatures.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 24.56 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / composite material / DBS02
DAIDO METAL
Oil-retaining bearing (bushing type) with self-lubricating characteristics.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.42 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / copper alloy / solid lubricant / HA
DAIDO METAL
Oilless bearing for high load (bushing type).- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 8.88 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / slotted / SF
ZOB
Multi-layer straight type oil free bushing designed with cost in mind.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 1.74 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / sintered metal / CBB
OILES
A solid lubricant has been dispersed to allow for use in any movement direction and achieves excellent performance in micro movements as well.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 15.73 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / brass / solid lubricant, axial design / SPFG
OILES
Demonstrates high performance at high load and low speed movement positions.
[Features]
· Suitable for rotation, swing and reciprocating motions.
· One bushing can bear radial journal load and thrust load at the same time.
· Machinery accuracy can be improved by increasing the flange thickness accuracy- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 32.11 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / plastic / 80B
OILES
Can be used oil free and provides superior resistance to load and abrasion.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.40 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 1.84 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / plastic (iglidur) / PSM
IGUS
Due to thermal stability and low water absorption, the iglidur® P bearings are among the most dimensionnally strong allround bearings under varying environmental conditions. iglidur® P bearings are recommended for oscillating and rotating movements at average loads.- Volume Discount
- 3D CAD data available
› Configure nowStarting from∗ ： 3.66 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / brass / solid lubricant / SGB
OILES
High strength brass alloy guide bushing. Can be used for reciprocating motion. Tightening with hexagon socket set screws, etc., is recommended for use.- 2D CAD data available
› Configure nowStarting from∗ ： 94.43 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Plain bearing bushes / slotted / TMB
OILES
Excellent in load withstand ability and heat resistance.- Volume Discount
- Stock
- 2D CAD data available
› Configure nowStarting from∗ ： 1.74 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / slotted / DDK05
DAIDO METAL
Compound bearing (flanged bushing type ) with low friction characteristics and that optimizes metal properties such as strength and dimensional stability.
[Features]
· The bearing surface has such a low coefficient of static and dynamic friction so that the surface runs smoothly without lubrication.
· So-called "StickSlip" does not occur.
· Also safe to use in oil.
· Can be used within a temperature range of -200°C to +280°C.
· Adaptable to operations under high-load, impact load, intermittent operation and reciprocating motion.
· Free from electrostatic induction (when installed, each bearing has an electrical resistance of 1 to 10 Ω per 1cm2).
· Bearing surface has superior chemical resistance. It is also not affected by solvents, such as petroleum and alcohol.
· Will not damage the surface of the engaging component.
· Extended surface life.
· Bearing is lightweight and thin (3 mm at its thickest), so it does not require much space. In other words, the design is more compact.
· Minimizes operating noise.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 1.71 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / slotted / SF
ZOB
Multi-layer type flanged oil free bushing designed with cost in mind.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 1.87 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / plastic / DDK05
DAIDO METAL
Compound bearing (bushing type ) with low friction characteristics and that optimizes metal properties such as strength and dimensional stability.
This environmentally friendly, lead- free, self-lubricating bearing requires no additional lubricant and does not use any lead at all.
Daidyne DDK05 is a compound bearing that combines a low-friction polytetrafluoroethylene (PTFE) bearing surface with the strength and dimensional stability of a metal backing.
[Features]
· The bearing surface has such a low coefficient of static and dynamic friction so that the surface runs smoothly without lubrication.
· "Stick Slip" doesn't happen.
· Also safe to use in oil.
· Can be used within a temperature range of -200°C to +280°C.
· Adaptable to operations under high-load, impact load, intermittent operation and reciprocating motion.
· Free from electrostatic induction (when installed, each bearing has an electrical resistance of 1 to 10 Ω per 1cm2).
· Bearing surface has superior chemical resistance and is not affected by solvents such as petroleum and alcohol.
· Will not damage the surface of the engaging component.
· Extended surface life.
· Bearing is lightweight and thin (3 mm at its thickest), so it doesn't take up much space and has a compact design.
· Minimizes operating noise.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.95 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / plastic / 77B
OILES
Has a low friction coefficient, and does not experience stick slip. Can also be used in a wide range of temperatures from low to high.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 1.17 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / composite material / LFCF
OILES
[Features]
· The thickness of the bearing is as thin as 0.5 mm.
· Now it is possible to use a bearing in a small space where it wasn't possible before.
· Can maintain a stable friction coefficient since resin that includes special additive is used in the sliding layer.
· Effective as countermeasure against abnormal sounds and friction at no bushing portions.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 0.93 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / brass / solid lubricant / SGF
OILES
Suitable for rotation, swing and reciprocating motions. Tightening with hexagon socket set screws, etc., is recommended for use.- 2D CAD data available
› Configure nowStarting from∗ ： 81.61 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Plain bearing bushes / sintered metal / precise design / CLB
OILES
Usable in any direction of motion thanks to the dispersion of solid lubricant and with excellent performance even while operating in micro-motion.- 2D CAD data available
› Configure nowStarting from∗ ： 93.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Plain bearing bushes with flange / cast iron / 30F
OILES
Excellent oil film retention and superior abrasion/seize resistance can greatly reduce the number of times lubrication is necessary.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 5.86 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Metallic |
| Resin Group |
| Multi-Layer |
| Environment |
| I.D. d(mm) |
| O.D. D(mm) |
| Overall Length L(mm) |
| Maximum Allowable PV Value Range(N/mm2•m/s) |
| Maximum Allowable PV Value(N/mm²·m/s) |
| Max. Allowable Surface Pressure P(N/mm2) |
| Max. Allowable Velocity V(m/s) |
| Housing Shape |
| Housing Material |
| Length Type |
| Mounting Shaft Fits |
| Mounting Hole Fits |
| Thickness T(mm) |
| Lubrication Condition |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | IGUS | IGUS | IGUS | IGUS | OILES | IGUS | IGUS | NTN | IGUS | OILES | OILES | IGUS | IGUS | IGUS | ZOB | OILES | IGUS | DAIDO METAL | ZOB | OILES | OILES | OILES | OILES | OILES | OILES | OILES | OILES | DAIDO METAL | DAIDO METAL | ZOB | OILES | OILES | OILES | OILES | IGUS | OILES | OILES | DAIDO METAL | ZOB | DAIDO METAL | OILES | OILES | OILES | OILES | OILES |
| Product Series | Plain bearing bushes with flange / plastic (iglidur) / M250 / MFM | Plain bearing bushes with flange / brass / solid lubricant / SPF | Plain bearing bushes / cast iron / 30B【1-10 Pieces Per Package】 | Plain bearing bushes with flange / composite / slotted / LFF | Plain bearing bushes with flange / brass / solid lubricant, axial design / SPFG | Plain bearing bushes with flange / composite material / LFCF | Plain bearing bushes with flange / brass / solid lubricant / SGF | Plain bearing bushes / sintered metal / precise design / CLB | |||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | 2.44 € *Unit price with basic configuration Volume Discount | 3.06 € *Unit price with basic configuration Volume Discount | 2.62 € *Unit price with basic configuration Volume Discount | 3.50 € *Unit price with basic configuration Volume Discount | 11.48 € *Unit price with basic configuration Volume Discount | 2.06 € *Unit price with basic configuration Volume Discount | 4.74 € *Unit price with basic configuration Volume Discount | 1.56 € *Unit price with basic configuration Volume Discount | 5.06 € *Unit price with basic configuration Volume Discount | 13.10 € *Unit price with basic configuration Volume Discount | 0.67 € *Unit price with basic configuration Volume Discount | 1.23 € *Unit price with basic configuration Volume Discount | 0.72 € *Unit price with basic configuration Volume Discount | 5.14 € *Unit price with basic configuration Volume Discount | 2.71 € *Unit price with basic configuration Volume Discount | 5.08 € *Unit price with basic configuration Volume Discount | 3.68 € *Unit price with basic configuration Volume Discount | 0.38 € *Unit price with basic configuration Volume Discount | 3.47 € *Unit price with basic configuration Volume Discount | 4.01 € *Unit price with basic configuration Volume Discount | 0.30 € *Unit price with basic configuration Volume Discount | 25.05 € *Unit price with basic configuration Volume Discount | 9.51 € *Unit price with basic configuration Volume Discount | 1.10 € *Unit price with basic configuration Volume Discount | 1.09 € *Unit price with basic configuration Volume Discount | 8.53 € *Unit price with basic configuration Volume Discount | 24.56 € *Unit price with basic configuration Volume Discount | 0.42 € *Unit price with basic configuration Volume Discount | 8.88 € *Unit price with basic configuration Volume Discount | 1.74 € *Unit price with basic configuration Volume Discount | 15.73 € *Unit price with basic configuration Volume Discount | 32.11 € *Unit price with basic configuration Volume Discount | 0.40 € *Unit price with basic configuration Volume Discount | 1.84 € *Unit price with basic configuration Volume Discount | 3.66 € *Unit price with basic configuration Volume Discount | 94.43 € *Unit price with basic configuration | 1.74 € *Unit price with basic configuration Volume Discount | 1.71 € *Unit price with basic configuration Volume Discount | 1.87 € *Unit price with basic configuration Volume Discount | 0.95 € *Unit price with basic configuration Volume Discount | 1.17 € *Unit price with basic configuration Volume Discount | 0.93 € *Unit price with basic configuration Volume Discount | 81.61 € *Unit price with basic configuration | 93.83 € *Unit price with basic configuration | 5.86 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 8 Days | Same day | Same day | Same day | Same day | Same day | Same day | 8 Days | 5 Days | Same day |
| Specifications |
|
|
|
| |||||||||||||||||||||||||||||||||||||||||
| Type | Shouldered Type | Straight Type | Shouldered Type | Straight Type | Straight Type | Shouldered Type | Shouldered Type | Straight Type / Flanged | Shouldered Type | Shouldered Type | Straight Type | Straight Type | Straight Type | Straight Type | Straight Type | Straight Type | Shouldered Type | Shouldered Type | Shouldered Type | Straight Type | Shouldered Type | Straight Type | Straight Type | Straight Type | Shouldered Type | Shouldered Type | Straight Type | Straight Type | Straight Type | Straight Type | Straight Type | Shouldered Type | Straight Type | Shouldered Type | Straight Type | Straight Type | Straight Type | Shouldered Type | Shouldered Type | Straight Type | Straight Type | Shouldered Type | Shouldered Type | Straight Type | Shouldered Type |
| Metallic | - | - | - | - | Brass | - | - | Brass | - | Brass | - | - | - | - | Brass | Sintered Stell | - | - | Brass | Cast Iron | - | Brass | Cast Iron | - | - | Sintered Stell | Bronze | - | Brass | - | Sintered Stell | Brass | - | - | - | Brass | - | - | - | - | - | - | Brass | Sintered Stell | Cast Iron |
| Resin Group | High Performance Polymer Group | High Performance Polymer Group | High Performance Polymer Group | High Performance Polymer Group | - | High Performance Polymer Group | High Performance Polymer Group | - | High Performance Polymer Group | - | - | High Performance Polymer Group | High Performance Polymer Group | High Performance Polymer Group | - | - | High Performance Polymer Group | POM (Polyacetal) | - | - | - | - | - | - | - | - | - | POM (Polyacetal) | - | - | - | - | - | PTFE (Polytetrafluoroethylene) | High Performance Polymer Group | - | - | - | - | - | PTFE (Polytetrafluoroethylene) | - | - | - | - |
| Multi-Layer | - | - | - | - | - | - | - | - | - | - | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | - | - | - | - | - | - | - | - | - | - | - | Steel, Sintered Bronze, Polyacetar | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | - | - | - | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | - | - | - | - | - | Steel, Copper Type Sintered Alloy | Steel, Sintered Bronze, Polytetrafluoroethylene) | Steel, Sintered Bronze, Polytetrafluoroethylene) | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | - | - |
| Environment | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| I.D. d(mm) | 3 ～ 150 | 1.5 ～ 150 | 3 ～ 70 | 2 ～ 100 | 6 ～ 170 | 1 ～ 32 | 3 ～ 120 | 3 ～ 25 | 2 ～ 75 | 6 ～ 120 | 3 ～ 160 | 2.5 ～ 100 | 1 ～ 75 | 2 ～ 70 | 5 ～ 100 | 3 ～ 30 | 4 ～ 80 | 3 ～ 35 | 5 ～ 50 | 5 ～ 100 | 2 ～ 50 | 12 ～ 160 | 5 ～ 20 | 5 ～ 160 | 3 ～ 60 | 3 ～ 30 | 20 ～ 100 | 3 ～ 30 | 6 ～ 160 | 3 ～ 50 | 12 ～ 65 | 6 ～ 80 | 2 ～ 50 | 3 ～ 50 | 3 ～ 95 | 40 | 5 ～ 100 | 3 ～ 60 | 3 ～ 50 | 3 ～ 160 | 3 ～ 50 | 5 ～ 16 | 40 | 40 ～ 80 | 5 ～ 60 |
| O.D. D(mm) | 4.5 ～ 155 | 3 ～ 155 | 4.5 ～ 75 | 3.5 ～ 105 | 10 ～ 190 | 3 ～ 40 | 4.5 ～ 125 | 5 ～ 30 | 4 ～ 80 | 10 ～ 140 | 5 ～ 165 | 4 ～ 105 | 3 ～ 80 | 3.5 ～ 75 | 9 ～ 120 | 6 ～ 40 | 5.5 ～ 85 | 5 ～ 39 | 9 ～ 60 | 8 ～ 125 | 4 ～ 55 | 18 ～ 180 | 7 ～ 24 | 7 ～ 165 | 4.6 ～ 65 | 6 ～ 40 | 30 ～ 125 | 5 ～ 34 | 10 ～ 180 | 5 ～ 55 | 18 ～ 80 | 10 ～ 96 | 4 ～ 55 | 6 ～ 60 | 4.5 ～ 100 | 60 | 7 ～ 105 | 4.6 ～ 65 | 4.6 ～ 55 | 5 ～ 165 | 6 ～ 60 | 6 ～ 17 | 55 | 50 ～ 96 | 8 ～ 75 |
| Overall Length L(mm) | 2 ～ 100 | 1.5 ～ 100 | 3 ～ 50 | 2.5 ～ 100 | 8 ～ 150 | 2 ～ 40 | 2.7 ～ 100 | 2 ～ 25 | 3 ～ 50 | 10 ～ 100 | 3 ～ 100 | 3 ～ 100 | 1 ～ 60 | 3 ～ 70 | 8 ～ 100 | 3 ～ 40 | 4 ～ 100 | 3 ～ 40 | 10 ～ 60 | 5 ～ 80 | 2 ～ 50 | 20 ～ 150 | 5 ～ 30 | 4 ～ 125 | 3 ～ 60 | 4.5 ～ 30 | 20 ～ 120 | 3 ～ 40 | 8 ～ 150 | 3 ～ 60 | 10 ～ 80 | 11 ～ 90 | 2 ～ 50 | 5 ～ 50 | 3 ～ 100 | 60 | 5 ～ 95 | 3 ～ 60 | 3 ～ 40 | 3 ～ 100 | 3 ～ 50 | 5.5 ～ 6.5 | 70 | 40 ～ 100 | 5 ～ 80 |
| Maximum Allowable PV Value Range(N/mm2•m/s) | 0.3 to 1.0 | 0.3 to 1.0 | 0.3 to 1.0 | 0.3 to 1.0 | 1.1 to 2.0 | 0.10 to 0.29 | 0.10 to 0.29 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 | 0.10 to 0.29 | 0.10 to 0.29 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 0.3 to 1.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 | 2.1 to 5.0 | 1.1 to 2.0 | 0.3 to 1.0 | 2.1 to 5.0 | 1.1 to 2.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 | 0.3 to 1.0 | 0.3 to 1.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 | 2.1 to 5.0 | 0.3 to 1.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 |
| Maximum Allowable PV Value(N/mm²·m/s) | 0.42 | 0.42 | 0.34 | 0.34 | 1.65 | 0.12 | 0.12 ～ 0.23 | 0.83 | 1.32 | 1.65 | 3.6 | 0.12 ～ 0.23 | 0.12 | 1.32 | 1.65 | 1.65 | 0.39 | 2.45 | 1.65 | 1.25 | 2.45 | 1.65 | 1.25 | 3.25 | 3.6 | 1.65 | 1 | 2.45 | 1.65 | 3.6 | 1.63 | 1.65 | 2.45 | 1 | 0.39 | 1.65 | 1.65 | 1.72 | 3.6 | 3.6 | 1 | 3.6 | 1.65 | 1.63 | 1.25 |
| Max. Allowable Surface Pressure P(N/mm2) | 80 | 80 | 35 | 35 | 29 | 20 | 20 ～ 60 | 7 | 150 | 29 | 49 | 20 ～ 60 | 20 | 150 | - | 10 | 50 | 17.5 | - | 10 | 17.5 | 49 | 10 | 24.5 | 49 | 10 | 15 | 17.5 | 29 | - | 24.5 | 29 | 17.5 | 7 | 50 | 29 | 24.5 | 137 | - | 49 | 7 | 49 | 29 | 24.5 | 10 |
| Max. Allowable Velocity V(m/s) | 1 ～ 5 | 1 ～ 5 | 1.5 ～ 10 | 1.5 ～ 10 | 0.5 | 0.8 ～ 5 | 0.8 ～ 6 | 1.83 | 1.5 ～ 10 | 0.5 | 0.65 | 0.8 ～ 6 | 0.8 ～ 5 | 1.5 ～ 10 | 0.5 | 0.85 | 1 ～ 4 | 0.85 | 0.5 | 1 | 0.85 | 0.25 | 1 | 1.15 | 0.65 | 0.85 | 0.4 | 0.85 | 0.5 | 0.65 | 0.5 | 0.5 | 0.85 | 1.65 | 1 ～ 4 | 0.5 | 0.4 | 1 | 0.65 | 0.65 | 1.65 | 0.65 | 0.5 | 0.5 | 1 |
| Housing Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Housing Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length Type | - | - | - | - | Single | - | - | Single | - | Single | Single | - | - | - | Single | Single | - | - | Single | Single | Single | Single | Single | Single | Single | Single | Single | - | - | Single | Single | Single | Single | Single | - | - | Single | - | Single | - | Single | Single | - | Single | Single |
| Mounting Shaft Fits | h9 | h9 | h9 | h9 | e7 | h9 | h9 | - | h9 | e7 | - | h9 | h9 | h9 | d8 / e7 / g6 / f8 | h7 | - | - | d8 / e7 / g6 / f8 | h7 | h7 | d8 | h7 | h7 | - | h7 | h7 | - | - | h7 | g6 | e7 | h7 | h6 | - | - | h7 | - | h7 | - | h6 | e7 | - | g6 | h7 |
| Mounting Hole Fits | H7 | H7 | H7 | H7 | H7 | H7 | H7 | - | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | - | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | - | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | - | H7 | H7 | H7 | H7 | H6 | H7 |
| Thickness T(mm) | 0.5 ～ 3 | 0.5 ～ 3.5 | 1 ～ 4 | 0.5 ～ 4 | - | 0.5 ～ 4 | 1 ～ 2.5 | 1 ～ 3 | 1 ～ 2.5 | - | - | 0.5 ～ 2.5 | 1 ～ 5 | 0.5 ～ 2.5 | 2 ～ 10 | - | 1 ～ 3 | 1 ～ 2 | 2 ～ 5 | - | - | - | - | - | - | - | - | 1 ～ 2 | - | 1 ～ 2.5 | - | - | - | - | 0.75 ～ 2.5 | - | - | 0.8 ～ 2.5 | 0.8 ～ 2.5 | 1 ～ 2.5 | - | - | - | - | - |
| Lubrication Condition | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Regular Lubrication | Unlubricated | Unlubricated | Regular Lubrication | Unlubricated | Unlubricated | Unlubricated | Unlubricated / Regular Lubrication | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated / Regular Lubrication | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated / Regular Lubrication | Unlubricated | Regular Lubrication |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Metallic
- Bronze
- Brass
- Cast Iron
- Sintered Stell
-
Resin Group
- POM (Polyacetal)
- PTFE (Polytetrafluoroethylene)
- High Performance Polymer Group
- Polyphenylenesulfide
-
Multi-Layer
- Steel, Sintered Bronze, Polytetrafluoroethylene)
- Steel, Sintered Bronze, Polyacetar
- Steel, Copper Type Sintered Alloy
- Metal Mesh, Polytetrafluoroethylene
- Aluminum, Fluororesin
- Polyacetal
-
Environment
- Standard
- Heat Resistant
- Foreign Object Resistant
- Vibration Resistant
- In Oil
- In Water
- In Seawater
- In Chemical
- Food
-
I.D. d(mm)
-
O.D. D(mm)
- 3
- 3.5
- 4
- 4.5
- 4.6
- 5
- 5.5
- 5.6
- 6
- 7
- 8
- 9
- 10
- 10.1
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 50
- 52
- 53
- 55
- 56
- 57
- 60
- 62
- 65
- 67
- 70
- 74
- 75
- 77
- 80
- 85
- 90
- 95
- 96
- 100
- 105
- 110
- 115
- 117
- 118
- 120
- 125
- 130
- 135
- 140
- 145
- 150
- 155
- 156
- 160
- 165
- 170
- 180
- 185
- 190
- 205
- 255
- 305
-
Overall Length L(mm)
- 1
- 1.5
- 2
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 3
- 3.5
- 3.8
- 3.9
- 4
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 5
- 5.5
- 5.7
- 5.8
- 5.9
- 6
- 6.5
- 6.8
- 7
- 7.25
- 7.5
- 7.7
- 7.8
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 11.8
- 12
- 12.5
- 13
- 13.5
- 13.8
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 20
- 21
- 21.5
- 22
- 23
- 23.5
- 24
- 25
- 25.5
- 26
- 27
- 28
- 29
- 30
- 31.5
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 38.5
- 39
- 40
- 42
- 42.5
- 45
- 46
- 47
- 48
- 50
- 51
- 52
- 52.5
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 67
- 67.5
- 68
- 69
- 70
- 73
- 74
- 75
- 76
- 77
- 78
- 80
- 81
- 82
- 85
- 86
- 90
- 95
- 97
- 100
- 103
- 108
- 110
- 112
- 115
- 120
- 125
- 128
- 130
- 140
- 141
- 150
- 158
- 170
- 188
- 500
-
Maximum Allowable PV Value Range(N/mm2•m/s)
-
Maximum Allowable PV Value(N/mm²·m/s)
-
Max. Allowable Surface Pressure P(N/mm2)
-
Max. Allowable Velocity V(m/s)
-
Housing Shape
-
Housing Material
-
Length Type
-
Mounting Shaft Fits
-
Mounting Hole Fits
-
Thickness T(mm)
-
Lubrication Condition
Brand
-
- MISUMI (0)
- OILES (38)
- IGUS (12)
- DAIDO METAL (7)
- ZOB (4)
- NTN (3)
- SKF (0)
- PERMAGLIDE (0)
- DOCERAM (0)
- INA (0)
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Categories related to Plain Bearing (Bushes)
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.