Push-Down Workpiece Clamps（Type：Peripheral Components）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Screw Jacks / screw jack
HALDER
Trapezoidal self-locking thread, spindle with final safety device. The holders, which can be secured by means of the T-slots, make it possible to tighten the jacks so that they will not slip out of position when a workpiece is changed. They also allow to fit screw jacks to vertical clamping surfaces. Screw jacks are frequently used for supporting workpieces. Use of the self-aligning cap ensures a correctly aligned bearing surface. Using the centering plate as an intermediate element, it is possible to fit a number of screw jacks sizes 52, 70 and 100 together one above the other.- 3D CAD data available
› Configure nowStarting from∗ ： 9.86 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 25.85 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Loose Slot Tenons, DIN 6323
HALDER
To be used for locating fixtures and clamping elements onto machine tables with T-slots to DIN 650.Being simply pushed into position after fixture or clamping element has been roughly positioned, they cannot cause damage to the machine as could protruding fixed slot tenons or low slot tenons.- 3D CAD data available
› Configure nowStarting from∗ ： 21.12 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Support Extensions, for straight clamps, slotted, with adjustable counter piece
HALDER
The support extension is screwed on the counter piece of the clamp EH 23185. for an extension of the clamping height (dimension h2). The clamping height can be adjusted stepless by means of the support extension.- 3D CAD data available
› Configure nowStarting from∗ ： 29.81 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Clamping Jaws, for floating clamp M 12
HALDER
The clamping jaws can be used for floating clamps 23320.0012 and 23320.0014 to increase the clamping range.- 3D CAD data available
› Configure nowStarting from∗ ： 70.14 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Clamping Jaws, for floating clamp M 16
HALDER
The clamping jaws can be used for the floating clamp 23320.0016 to increase or decrease the clamping range.- 3D CAD data available
› Configure nowStarting from∗ ： 116.24 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Height Adaptors, for compact clamp
HALDER
The height adaptors for compact clamps allow for a clamping height increase and have the following characteristics:- continuous covering of clamping height- height adaptor allows an exact positioning of compact clamp at designated slot distances- height can optionally be expanded- 3D CAD data available
› Configure nowStarting from∗ ： 120.75 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 121.56 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 186.05 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 132.36 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 348.34 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 125.27 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 89.09 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Tightening Force (Range Selectable)(N) |
| Material |
| Type |
| Type |
| Applicable Tightening Force(N) |
| Stroke S(mm) |
| Arm Height Type |
| Arm Length Type |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
| Product Series | Support Extensions, for straight clamps, slotted, with adjustable counter piece | ||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | 9.86 € *Unit price with basic configuration | 25.85 € *Unit price with basic configuration | 21.12 € *Unit price with basic configuration | 29.81 € *Unit price with basic configuration | 70.14 € *Unit price with basic configuration | 116.24 € *Unit price with basic configuration | 120.75 € *Unit price with basic configuration | 121.56 € *Unit price with basic configuration | 186.05 € *Unit price with basic configuration | 132.36 € *Unit price with basic configuration | 348.34 € *Unit price with basic configuration | 125.27 € *Unit price with basic configuration | 89.09 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | Same day | Same day | 3 Days | 3 Days | 4 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days |
| Tightening Force (Range Selectable)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Steel | Aluminum Alloy | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Type | Optional Components | Main Body | - | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Type | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components |
| Applicable Tightening Force(N) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stroke S(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Arm Height Type | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Arm Length Type | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Tightening Force (Range Selectable)(N)
- Up to 100
- 100 to 1000
- 1000 to 3000
- 3000 or More
- up to 8.5
- up to 5.1
-
Material
- Steel
- Stainless Steel
- Aluminum Alloy
- Zinc Alloy
-
Type
- Main Body
- Optional Components
-
Type
-
Applicable Tightening Force(N)
-
Stroke S(mm)
-
Arm Height Type
-
Arm Length Type
Brand
CAD data type
-
- 2D
- 3D
Categories related to Push-Down Workpiece Clamps
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.