Push-Down Workpiece Clamps（Page 3）

?* Information on days to ship and prices

• 

  Chain clamp, steel tempered (04211)

  NORELEM

  · Even pressure distribution
  
  · Plastic elements to protect the workpiece
  
  · Large adjustment range

  Select to compare

  Configure now
  Starting from∗ ：	1,120.56 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamp strap double sided (04189)

  NORELEM

  · Two workpieces can be clamped simultaneously
  
  · Can be used with self-aligning pads
  
  · Flexible application
  
  · For clamping any workpiece and component

  Select to compare

  Configure now
  Starting from∗ ：	32.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamp strap swivelling, carbon steel (04030)

  NORELEM

  · With end stop
  
  · Flexible application
  
  · Application sectors: machine construction, toolmaking, fixture construction
  
  · For clamping any workpiece and component

  Select to compare

  Configure now
  Starting from∗ ：	11.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Slot key without hole mild steel (03260)

  NORELEM

  · For aligning fixtures and clamping tools on clamping plates
  
  · Retractable
  
  · No damage to the machine table during transport due to protruding slot nuts
  
  · Hardened and ground

  Select to compare

  Configure now
  Starting from∗ ：	25.83 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hook clamp with collar, with clamp force intensifier, carbon steel (04371-410, 04371-412)

  NORELEM

  · Clamping force intensifiers
  
  · Manual clamping
  
  · Tool-free

  Select to compare

  Configure now
  Starting from∗ ：	159.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swing Clamp (Clamping Lever Type) (QLSWC)

  IMAO CORPORATION

  Toolless clamp with rotating hook by lever operation. A clamping lever type. Long clamp stroke, with powerful clamp force. Both right and left rotational specifications available. This series CAD data is being revised. These revisions will be completed soon.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	117.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Self Cut Hook (QLSW-SH)

  IMAO CORPORATION

  Replacement hook for swing clamp Cut to intended shape to use.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	103.55 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Extension Arm (QLSND-EX20)

  IMAO CORPORATION

  With the snap clamp (down type) use extension arm, arm part lengthens to enable clamping in distant positions.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.32 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Swing Clamp (Cam Lever Type) (QLSWC)

  IMAO CORPORATION

  Toolless clamp with rotating hook by lever operation. Cam lever type. Black electroless nickel plating specification available. Both right and left rotational specifications available. This series CAD data is being revised. These revisions will be completed soon.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	119.94 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Snap Clamp (Down Type) (QLSND)

  IMAO CORPORATION

  Push down type spring clamp, with clamp force of 20N to 60N for light-duty work.
  
  [Features]
  · Push down type.
  · Excellent operability lever with grip.
  · In unclamped position lever is fixed.
  · Snap method employed (Rotation arm double lock type)

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	88.95 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamps, DIN 6314 flat

  HALDER

  Heat-treated steel, varnished.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.84 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamps, DIN 6316 with goose-neck

  HALDER

  Heat-treated steel, varnished.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamps, stepped

  HALDER

  Heat-treated steel, tempered, blackened.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.85 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamps, with nose, closed

  HALDER

  Thanks to the closed slot, the clamp is suitable for an application with rotating workpieces.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	102.83 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamps, slotted, with adjustable counter piece

  HALDER

  The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	89.78 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamps, slotted, with adjustable counter piece, with T-Bolt

  HALDER

  The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	104.11 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamps, slotted, with adjustable counter piece, with stud

  HALDER

  The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	101.90 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Support Extensions, for straight clamps, slotted, with adjustable counter piece

  HALDER

  The support extension is screwed on the counter piece of the clamp EH 23185. for an extension of the clamping height (dimension h2). The clamping height can be adjusted stepless by means of the support extension.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.81 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Floating Clamps, separate clamping and locking M 12

  HALDER

  Floating clamps with seperate clamp and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping and supporting force can individually be designed.
  The benefits of the floating clamp are:
  - avoids vibration during the processing
  - clamps ribs, beads and shackles to reinforce clamped components
  - distortion-free clamping of raw parts.
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,018.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Floating Clamps, combined clamping and locking M 16

  HALDER

  The floating clamp is used to clamp and support additional clamping points on components.
  The benefits of the floating clamp are:
  - especially suitable for large workpieces
  - avoids vibration during the processing
  - clamps ribs, beads and shackles to reinforce clamped components
  - distortion-free clamping of raw parts
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,649.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Jaws, for floating clamp M 12

  HALDER

  The clamping jaws can be used for floating clamps 23320.0012 and 23320.0014 to increase the clamping range.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	70.14 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamping Jaws, for floating clamp M 16

  HALDER

  The clamping jaws can be used for the floating clamp 23320.0016 to increase or decrease the clamping range.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	116.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Elements

  HALDER

  Used as clamps in conventional fixtures. A reamed hole is provided in the body of the fixture. The hole depth has to be adapted to the desired clamping height. To provide a counter force, a support can be placed against the rounded end of the clamp (radius 22). This support can be flat, half-rounded or V-shaped. Clamping is achieved by means of a DIN 933 hexagon screw.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	112.17 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Compact Clamps

  HALDER

  The compact clamps are all purpose clamping elements. Due to the self-locking clamping lever application can either take place in horizontal or vertical position in both, machined and raw workpieces.
  Features:
  - exact and position precise clamping
  - ease of operation
  - high clamping force at low tightening torques, abrasion-resistant due to clamping lever with bearings
  - continuous, large clamping area
  - clamping lever entirely retractable for hindrance-free exchange of workpieces
  - threaded clamping lever can be used with many clamping elements, e.g. ball-ended thrust screws (EH 22700. - EH 22720.), self-aligning pads (EH 22730./EH 22740.) etc.
  - large adjusting range at constant clamping force
  - continuous height adjustment by height adaptors 23690.0112/.0116
  - easy and flexible set up
  - corrosion-resistant
  - resistent to dirt and chips
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	297.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Height Adaptors, for compact clamp

  HALDER

  The height adaptors for compact clamps allow for a clamping height increase and have the following characteristics:
  - continuous covering of clamping height
  - height adaptor allows an exact positioning of compact clamp at designated slot distances
  - height can optionally be expanded
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	120.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Straight Clamps, short

  HALDER

  [Specifications]
  ・Type: Hold Down Type
  ・Material: Heat Treatment Steel
  ・a(mm): 20, 30
  
  Straight Clamps, short.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.52 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Straight Clamps, long

  HALDER

  [Specifications]
  ・Type: Hold Down Type
  ・Material: Heat Treatment Steel
  ・a(mm): 20, 30
  ・b1(mm): 12.5, 17
  
  Straight Clamps, long

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Intermediate Elements

  HALDER

  [Specifications]
  ・Type: Peripherals
  ・Material: Steel
  ・a(mm): 25~240
  ・b1(mm): 25, 30
  
  Intermediate Elements.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	121.56 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Elements

  HALDER

  [Specifications]
  ・Type: Peripherals
  ・Material: Steel
  ・a(mm): 30, 40
  ・b1(mm): 25, 30
  
  Base Elements.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	132.36 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Elements, swivelling

  HALDER

  [Specifications]
  ・Type: Peripherals
  ・Material: Steel
  ・a(mm): 29.7, 39.7
  ・b(mm): 88, 105
  
  Base Elements, swivelling.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	348.34 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Elements, low

  HALDER

  [Specifications]
  ・Type: Peripherals
  ・Material: Steel
  ・a(mm): 12
  ・b(mm): 30
  
  Base Elements, low.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	125.27 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Elements, for location hole

  HALDER

  [Specifications]
  ・Type: Peripherals
  ・Material: Steel
  ・a(mm): 8, 12
  ・b(mm): 25, 30
  
  Base Elements, for location hole.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	89.09 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  APC - Adapter for PC support clamp for round tubes -Technopolymer

  ELESA

  Adapter for PC support clamp for round tubes in glass fibre reinforced polyamide-based technopolymer, colour grey RAL 7042.
  The kit includes a technopolymer adapter, a M6 zinc-plated steel threaded insert to be installed with a normal riveting tool on the tube and an M6 cylinder-head screw.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.92 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Plates

  HALDER

  [Specifications]
  ・Material: Grey cast iron, Steel, case-hardened
  ・a(mm): 150, 200, 300
  ・b(mm): 100~800
  ・For screw: M12, M16
  
  Base Plates.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2,614.33 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Plates, overall dimensions same as pallets DIN 55 201

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened
  ・a(mm): 100
  ・For screw: M12, M16
  ・System: V40, V70
  
  Base Plates, overall dimensions same as pallets DIN 55 201.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3,943.53 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Connecting Elements, hydraulically operated, double acting, with lifting-off and blow-out

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened
  ・Release pressure to(bar): 80
  ・Release pressure of(bar): 60
  ・Holding force(N): 30000
  
  Connecting Elements, hydraulically operated, double acting, with lifting-off and blow-out.

  Select to compare

  Configure now
  Starting from∗ ：	853.10 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Connecting Elements, modular, hydraulically operated

  HALDER

  [Specifications]
  ・Body: Steel, case-hardened, ground
  ・Release pressure to(bar): 120
  ・Release pressure of(bar): 80
  ・Holding force(N): 10000
  
  Connecting Elements, modular, hydraulically operated.

  Select to compare

  Configure now
  Starting from∗ ：	1,328.43 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Connecting Elements, modular, hydraulically operated, protected against twisting

  HALDER

  [Specifications]
  ・Body: Steel, case-hardened, blackened, ground
  ・Release pressure to(bar): 120
  ・Release pressure of(bar): 80
  ・Holding force(N): 10000
  
  Connecting Elements, modular, hydraulically operated, protected against twisting.

  Select to compare

  Configure now
  Starting from∗ ：	1,519.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Connecting Elements, modular, mechanically operated

  HALDER

  [Specifications]
  ・Body: Steel, case-hardened, ground
  ・Control module: Steel, blackened
  ・Holding force(N): 10000
  
  Connecting Elements, modular, mechanically operated.

  Select to compare

  Configure now
  Starting from∗ ：	1,216.79 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Connecting Elements, modular, mechanically operated, protected against twisting

  HALDER

  [Specifications]
  ・Body: Steel, case-hardened, ground
  ・Control module: Steel, blackened
  ・Holding force(N): 10000
  ・Centering accuracy(mm): < 0.01
  
  Connecting Elements, modular, mechanically operated.

  Select to compare

  Configure now
  Starting from∗ ：	1,371.80 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Connecting Elements, modular, pneumatically operated, protected against twisting

  HALDER

  [Specifications]
  ・Body: Steel, case-hardened, ground
  ・Control module: Aluminium
  ・Holding force(N): 5000
  ・Centering accuracy(mm): < 0.01
  ・Release pressure(bar): 6
  
  Connecting Elements, modular, pneumatically operated, protected against twisting.

  Select to compare

  Configure now
  Starting from∗ ：	1,406.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Connecting Elements, modular, pneumatically operated, reinforced

  HALDER

  [Specifications]
  ・Body: Steel, case-hardened, ground
  ・Control module: Aluminium
  ・Holding force(N): 10000
  ・Centering accuracy(mm): < 0.01
  ・Release pressure(bar): 6
  
  Connecting Elements, modular, pneumatically operated, reinforced.

  Select to compare

  Configure now
  Starting from∗ ：	1,400.33 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Cam clamps single (K0010)

  KIPP

  · Cam levers are used for quick and torque-free clamping
  
  · Workpiece needs no further securing
  
  · Easy to operate
  
  · High clamping forces
  
  · Application sectors: machine construction, toolmaking, fixture construction

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	130.82 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamp strap assemblies (K0003)

  KIPP

  · Compact clamping unit
  
  · Flexible application
  
  · Application sectors: machine construction, toolmaking, fixture construction
  
  · For clamping any workpiece and component

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamp straps DIN 6314 straight, steel or aluminium (K1516)

  KIPP

  · Flexible application
  
  · Application sectors: machine construction, toolmaking, fixture construction
  
  · For clamping any workpiece and component

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.54 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...