Rotation Handles, Crank Handles（Page 4）

?* Information on days to ship and prices

• 

  Disc Handle Aluminum

  HALDER

  [Features]
  · Hub is machined. After the rim is turned, the unit is polished to provide gloss.
  · Non-machined parts are sandblasted.
  · Circularity of rim and perpendicularity with shaft are according to JS12 or less.
  · There is a cavity for gripping on the back.
  · Operating temperature of the type with a rotating handle is maximum 110°C.
  [Applications]
  · Normally this can be used as-is without painting. Use a washer with a countersink hole EH22270 to secure to the shaft from the front surface.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	18.27 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spoke Handle Aluminum

  HALDER

  [Features]
  · Hub is machined.
  · After the rim is turned, the unit is polished to provide gloss.
  · Non-machined parts are sandblasted.
  · Circularity of rim and perpendicularity with shaft are according to JS12 or less.
  · Operating temperature of the type with a rotating handle is maximum 110°C.
  [Applications]
  · Normally this can be used as-is without painting. Use a washer with a countersink hole EH22270 to secure to the shaft from the front surface.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	24.31 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Bull´s eye levels

  GANTER

  Bull´s eye levels GN 2278 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.
  The housing is grooved at its lower diameter d3, making it easier to mount in place, e.g. by gluing.
  The spirit levels are aligned in relation to the reference or contact surface, so that the bubble is located inside the marking ring once the horizontal position of the contact surface is reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.70 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Control handles, Zinc-die casting

  GANTER

  Control handles GN 112.1 allow fine adjustment.
  They are connected to a shaft by means of a cross pin. To simplify the installation there is a centred drilling on both sides.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.56 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Control handwheels, with deposition for scale

  GANTER

  Control handwheels GN 736.1 are used for setting operations with low torque. Coarse setting is made by means of the cylindrical handle (fingertip grip) followed by fine setting using the knurled rim of the knob.
  The model fitted with collet offers an absolutely reliable mounting on the shaft and at the same time allows an easy setting of the adjustable scale ring wheel. The scale is wear resistant and easily legible since the engraved alu coloured numbers contrast with the black anodized surface. Besides the standard scale (Coding S) the control handwheels can be supplied with any type of graduation.
  Full details of the available graduations, numbering sequence, number position and type of scale see under "How to order - Graduations".
  Prices for scales on request!

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cranked handles with retractable handle, Aluminium

  GANTER

  The handpiece of the cranked handle GN 471.3 is locked in a tapered bore in the operating position.
  For tilting, the handle must first be pulled out of the taper in axial direction.
  A compression spring holds the handle in both end positions. When folded out, it automatically re-engages.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	38.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cranked handles with retractable handle, Aluminium

  GANTER

  The handpiece of the cranked handle GN 472.3 is locked in a tapered bore in the operating position.
  For tilting, the handle must first be pulled out of the taper in axial direction.
  A compression spring holds the handle in both end positions. When folded out, it automatically re-engages.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	34.00 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cranked handles with retractable handle, Aluminium

  GANTER

  The handpiece of the cranked handle GN 472.5 is locked in a tapered bore in the operating position.
  For tilting, the handle must first be pulled out of the taper in axial direction.
  A compression spring holds the handle in both end positions. When folded out, it automatically re-engages.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	51.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cranked handles, Zinc die casting

  GANTER

  Cranked handles, Zinc die casting

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Disc handwheels

  GANTER

  Disc handwheels GN 321 have recessed grips at their back.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	20.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Disc handwheels, Aluminium

  GANTER

  Disc handwheels DIN 3670 have recessed grips at their back. As a rule they are supplied without handle, but the mounting of a handle is possible.
  The handwheel diameter d1=80 and d1=400 are not provided in the official standard sheet.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	19.02 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Handwheels with retractable handle, Safety rectractable

  GANTER

  Handwheels GN 322.7 are suitable for applications where the handle must not remain in the operating position. In order to bring the handle into this position it has to be turned first through 90° to a stop against a torsion spring and then it is pushed against spring pressure into its hold position.
  By maintaining the forward thrust on the handle the handwheel can easily be rotated. When releasing the handle the springs returns it back to the retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	70.32 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Handwheels with retractable handle, Safety rectractable

  GANTER

  Retractable handwheels GN 923.7 are distinguished by modern design.
  
  These andwheels are suitable for applications where the handle must not remain in the operating position.
  
  In order to bring the handle into this position it has to be turned first through 90° to a stop against a torsion spring and then it is pushed against spring pressure into its hold position. By maintaining the forward thrust on the handle the handwheel can easily be rotated.
  
  When releasing the handle the springs returns it back to the retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	61.22 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Handwheels with retractable handle, Safety rectractable

  GANTER

  Retractable handwheels GN 924.7 are distinguished by modern design.
  
  These handwheels are suitable for applications where the handle must not remain in the operating position.
  
  In order to bring the handle into this position it has to be turned first through 90° to a stop against a torsion spring and then it is pushed against spring pressure into its hold position. By maintaining the forward thrust on the handle the handwheel can easily be rotated.
  
  When releasing the handle the springs returns it back to the retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	61.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Safety handwheels with friction bearing

  GANTER

  The use of coupling attachments in handwheels other than specified is also possible.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	118.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Safety handwheels with needle bearing

  GANTER

  The use of coupling attachments in handwheels other than specified is also possible.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	157.72 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Safety handwheels, Aluminium

  GANTER

  The hub cap protects the bearing from the ingress of dust and at the same time acts as a shroud for the mounting components.
  The wheel hub is fitted with an inside groove to retain the hub cap on its segmented edge.
  The hub cap is pushed into position by hand and it can be removed by levering it away at the relieved point with a screw driver.
  The needle bearings are greased on assembly which should be ample for permanent lubrication.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	150.96 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Safety handwheels, fixed fearing flange

  GANTER

  GN 327 safety handwheels feature the ultimate in health and safety at work standards because the handwheel, if disengaged, is mounted on a fixed component, the bearing flange. The wheel is fully disengaged from the rotating shaft.
  The bearing flange can also accept the bearing of the shaft via the bearing bushing (code No. 1). This bearing bushing is a dry bearing (DU bushing). Normally, the shaft has a separate bearing and the bearing bushing serves to center the bearing flange.
  Centering can also be effected by a centering ring (code No. 2) if the appropriate bore hole has been made at the machine side. In this case there is no need for the bearing bushes and no bearing friction (heating) will occur.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	315.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spoked handwheels, Aluminium, plastic coated

  GANTER

  Spoked handwheels GN 924 are distinguished by modern design.
  
  The removable plastic cover shrouds the fixing components such as screws, countersunk washers as well as the shaft end.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	23.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spoked handwheels, blank, rim polished

  GANTER

  Spoked handwheels, blank, rim polished

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	29.70 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  EKH. - Crank handles -Technopolymer

  ELESA

  Crank handles.
  Glass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish.
  Glass-fibre reinforced polyamide based (PA) technopolymer hub cap, in Ergostyle colours, matte finish, press-fit assembly.
  Black-oxide steel hub, H7 reamed hole.
  with revolving handle.
  The crank is also suitable to tighten to a high torque.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	18.70 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  EMW. - Monospoke handwheels -Technopolymer

  ELESA

  Monospoke handwheels.
  Glass-fibre reinforced polypropylene based (PP) technopolymer, black colour, matte finish.
  black-oxide steel boss, H7 reamed hole.
  Available with various types of handles.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	110.11 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  ETK. - Three-arm handwheel -Technopolymer

  ELESA

  Three-arm handwheel
  Glass-fibre reinforced polypropylene based (PP) technopolymer, black colour, matte finish.
  Boss cap in polyester based technopolymer (PBT) in Ergostyle colours, press-fit assembly.
  black-oxide steel boss, H7 reamed hole.
  The three 120° arms allow for maximum ease of operation.
  The design of the ETK handwheel offers an excellent level of safety for the hands during manoeuvring operations.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	104.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  EWW-XX - Handwheel for position indicators -Technopolymer

  ELESA

  Handwheel for position indicators.
  Glass-fibre reinforced polypropylene based (PP) technopolymer, grey-black colour, matte finish.
  This steering handwheel has been designed to be mounted on control shafts of machines or equipment and especially for guiding lift trucks and handling vehicles.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	115.72 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  EYK. - Three-arm handwheels -Technopolymer

  ELESA

  Three-arm handwheels.
  Glass-fibre reinforced polypropylene based (PP) technopolymer, black colour, matte finish.
  Boss cap in polyester based technopolymer (PBT) in Ergostyle colours, press-fit assembly.
  black-oxide steel boss, H7 reamed hole.
  The three 120° arms allow for maximum ease of operation.
  The design of the EYK handwheel offers an excellent level of safety for hands during manoeuvring operations.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	96.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  ME. - Balanced crank handles -Duroplast

  ELESA

  Balanced crank handles.
  Reinforced phenolic based (PF) Duroplast.
  Polyamide based (PA) technopolymer for ME.95.
  Balancing by means of an incorporated counterweight.
  black-oxide steel boss, H7 reamed hole.
  Reamed hole provided with centres already drilled for pinning to shaft.
  With revolving handle in Duroplast.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	33.90 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  MT-AT - Crank handles -Technopolymer

  ELESA

  Crank handles.
  Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
  Black-oxide steel boss, H9 reamed hole.
  Available with revolving or fold-away handle.
  The reticular structure of the crank arm and the technopolymer used make this handle very strong.
  The crank is also suitable to tighten to a high torque.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.55 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  VBR.2 - Two-arm handwheels -Technopolymer and steel

  ELESA

  Two-arm handwheels.
  Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, glossy finish.
  Matte chrome-plated steel arms complete with handles type I.622 in technopolymer.
  Black-oxide steel boss, uncovered front end with pre-drilled pass-through hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	50.78 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  VBR.4 - Four-arm handwheels -Technopolymer and steel

  ELESA

  Four-arm handwheels.
  Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, glossy finish.
  Matte chrome-plated steel arms complete with handles type I.622 in technopolymer.
  Black-oxide steel boss, uncovered front end with pre-drilled pass-through hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	75.33 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  VDN.FP+I+ST - Safety solid handwheels -Duroplast

  ELESA

  Safety solid handwheels.
  High-strength, reinforced phenolic based (PF) Duroplast, black colour, glossy finish.
  Matte anodised aluminium.
  Safety coupling bushing with "Pull-coupling" assembly GN 000.5 hardened steel with ground sliding surfaces, reamed assembly hole and keyway in compliance with DIN 6885/2 tolerance P9.
  I.301+x Duroplast revolving handle.
  The rim with internal rear scallops makes the grip and the manoeuvre of the handwheel easier.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	310.82 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• 

  VDN.FP-SST - Solid handwheels -Duroplast stainless steel hub

  ELESA

  Solid handwheels.
  High-strength, reinforced phenolic based (PF) Duroplast, black colour, glossy finish.
  Matte anodised aluminium ring.
  AISI 303 stainless steel hub, solid or with H7 reamed hole.
  Available with revolving handle
  The rim with internal rear scallops makes the grip and the manoeuvre of the handwheel easier.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	31.66 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  VRTP-P-SST - Spoked handwheels with solid section -Technopolymer

  ELESA

  Spoked handwheels with solid section.
  High-resilience polypropylene based (PP) technopolymer, black colour, matte finish. Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).
  AISI 304 stainless steel boss, H7 reamed hole.
  The solid rim of the handwheel allows the easy cleaning thanks to the absence of rear recesses.
  Available with several types of handles and with hole and keyway according to DIN 6885/1, tolerance P9.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	22.86 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  VRU. - Spoked handwheels -Duroplast large diameter hub

  ELESA

  Spoked handwheels.
  High-strength, reinforced phenolic based (PF) Duroplast, black colour, glossy finish.
  Large diameter black-oxide steel hub, uncovered front end with spot-drilling.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	30.58 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Crank Handles, with folding handle

  HALDER

  [Operation]
  In the operating position the handle is locked. To move the handle to the rest position, it must be pulled out axially and flipped round.

  Select to compare

  › Configure now
  Starting from∗ ：	34.92 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Handwheels, A4

  GANTER

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	19.72 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Handwheels, made sheet steel

  GANTER

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	11.04 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Crank handles aluminium with fold-away grip and reamed hole (K0997)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Version: reamed hole

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	29.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles aluminium with safety grip and reamed hole (K0998)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Version: reamed hole
  
  · Swivels back automatically after releasing

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	48.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles aluminium with safety grip and square socket (K0997)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Version: square socket

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	31.26 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles aluminium with safety grip and square socket (K0998)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Version: square socket
  
  · Swivels back automatically after releasing

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	50.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles offset similar to DIN 468, Form D, with revolving grip (K0684)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Form D: crank handle with revolving grip

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	19.94 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles offset similar to DIN 468, Form F, with fixed grip (K0684)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Form F: crank handle with fixed grip

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles revolving grip reamed hole (K0996)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Version: reamed hole

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	14.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles revolving grip square socket (K0996)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Version: square socket

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.09 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles stainless steel revolving grip reamed hole (K0999)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Version: reamed hole
  
  · Stainless steel 1.4305, 1.4308, 1.4310

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	35.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...