Tightening Fittings（Thread-to-Tube Connection Type：Male Straight）

?* Information on days to ship and prices

• 

  Stainless Steel EN 1.4401 Equiv. Insert Fittings, Male Connector, KFG2H Series

  SMC

  [Features]
  · Compact, weight reduced.
  · Lubrication-free.
  · It can be used with steam.
  · Compliant with the Food Sanitation Act of Japan.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.23 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  KFH, Insert Fitting, Male Connector

  SMC

  A general model used for piping in the direction perpendicular to the female thread section. [Sleeve material] Nylon/Brass

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.06 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  KFH, Insert Fitting, Male Connector

  SMC

  A general model used for piping in the same direction from the female thread section. [Sleeve material] Nylon/Brass

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.56 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  H, Self-align Fitting - Male Connector

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · A non-directional type metal sleeve tightening fitting.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  · Can be used with soft copper pipes.
  [Applications]
  · Used for piping in the same direction from female threads.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.19 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Junron Stainless Steel Fitting Nipple

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  New Generation Fitting, PS-FIT, PEEK Resin

  AOI

  [Features]
  ・ Realized zero liquid due to special structure
  ・ Structure with less internal liquid pool than conventional fittings
  ・ High heat resistance and chemical resistance due to PEEK resin material of the main body

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	17.23 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Connector (Inch Size)

  NITTA

  A 3-point brass connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.65 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Junron Stainless Steel Fitting Male Bulkhead Union

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	30.04 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Quick Seal Series DK Tube Dedicated Type Connector

  NITTA

  Consisting of three parts: fitting body of connector, nut, and sleeve. Dedicated fitting for DK tubes. No need to wrap with sealing tape.
  
  [Features]
  · Screw-in type.
  · Three parts: fitting body, nut, and sleeve.
  · Fittings dedicated to DK tubes.
  · Only connectors are sealed.
  · Does not require sealing tape.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2.61 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Fitting (Connector)

  TRUSCO NAKAYAMA

  Features
  • Sealed screw unit.
  • Product offers superior pressure resistance and vibration resistance properties.
  
  Application
  • For pneumatic, hydraulic, and water pressure.

  Select to compare

  › Configure now
  Starting from∗ ：	5.73 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel Fitting Male Connectors

  TRUSCO NAKAYAMA

  Select to compare

  › Configure now
  Starting from∗ ：	16.45 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Couplings with Tube Insert / Nut and Sleeve Integrated / Connectors

  MISUMI

  [Features] The media used are air, water or oil, connection fitting with inserts for pipes.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.71 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Brass Tightening Fitting - Straight - for Sputtering Resistance

  NIHON PISCO

  Special brass is used for metal body to greatly improve corrosion resistance to water.
  
  [Features]
  · Special brass is used for metal body.
  · Corrosion resistance to water has been greatly increased.
  · Ideal for use in the automobile industry and for mold temperature control.
  · Never worry about forgetting or losing the sleeve again with this no-sleeve design.
  · A wide variety is available to support a wide range of applications.
  · 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  for Corrosion Resistance - Tightening Fittings SUS316 - Straight

  NIHON PISCO

  SUS316 is used to provide all materials with excellent corrosion resistance.
  
  [Features]
  · SUS316 is used to provide all materials with excellent corrosion resistance.
  · Never worry about forgetting or losing the sleeve again with this no-sleeve design.
  · Air cleaned and packaged in a Class 1000 clean room .
  · Added inch sizes.
  · Improved selection.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.77 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Corrosion Resistant SUS316 Tighten Fitting, Bulkhead Straight

  NIHON PISCO

  All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	18.25 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SUS316 Fitting Male Connectors

  CHIYODA TSUSHO

  Full decreasing treatment for cleanliness. Male connectors.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.57 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Hose Fitting, Hose Nipple

  CHIYODA TSUSHO

  A hose nipple with high pull-out strength.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.00 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hose Fitting, Universal Nipple

  CHIYODA TSUSHO

  A cap-nut universal nipple with high pull-out strength.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Junron Brass Nipple Joint【1-20 Pieces Per Package】

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings."
  The tube insert allows for secure connection of a sleeve and a cap nut.
  With collar thread seal for each R (PT) thread size.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  US2 Series Nipple for Flexible Tubes Made Up of Junlon Stainless Steel

  JUNKOSHA

  [Features]
  ▪ Stainless steel fittings for flexible tubing.
  ▪ To resolve tube twisting during piping, a unique mechanism of cap nuts built into the sleeve can be used.
  · Tightening torque of the cap nut does not need to be managed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Connector (mm Size)

  NITTA

  It consists of three parts: brass fitting body of connector (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.84 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series, Insert Type (Stainless Steel Specifications), Connector (mm Size)

  NITTA

  A 3-point stainless steel specification connector (mm sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Also demonstrates excellent performance at negative pressures.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Demonstrate excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also has excellent performance with negative pressure.
  · Made of SUS304 for excellent corrosion resistance.
  · Complies with JIS B 8381-1995 (connector for flexible pneumatic hose).

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.43 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series Insert-Less Type Connector

  NITTA

  Consists of three parts: connector fitting unit, nut, and sleeve. The effective cross-sectional area is larger without an insert.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting unit, nut, and sleeve.
  · Guarantees a high flow rate.
  · Has no insert, giving it a wider cross-section.
  · Only the connectors are sealed, so there is no need to wrap them with sealing tape.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Nylon Coil Tube Dedicated Type Connector

  NITTA

  It consists of three parts: fitting body of connector, nut, and sleeve. Fitting dedicated to nylon coil tubes.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Dedicated Type Quick Seal Series Nylon Coil Tube ES Swivel Nut Female Connector

  NITTA

  Consists of 3 parts: An ES swivel nut female connector fitting body, a nut, and a sleeve. Fitting specially designed for use with nylon coil tubes.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.43 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series - Insert Type (Stainless Steel) - Connector (Inch Size)

  NITTA

  A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.10 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Chemifit CP Series Connectors【5 Pieces Per Package】

  NITTA

  Connectors are injection molded for a smooth inner surface. Does not generate dust or pollution. Uses a special polypropylene resin.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.47 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Fitting (Insertless Connector)

  TRUSCO NAKAYAMA

  Features
  • Sealed screw unit.
  • Product offers superior pressure resistance and vibration resistance properties.
  
  Application
  • For pneumatic, hydraulic, and water pressure.

  Select to compare

  › Configure now
  Starting from∗ ：	5.73 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...