Rod End Bearings, Spherical Bearings（Connection screw M：M6）

?* Information on days to ship and prices

• • Recommendation

  

  Link Ball, Male Threaded Holder, BL

  THK

  The holder is perpendicular to the ball shank.
  With grease pockets on the top and bottom of the spherical area, this model has high lubricity and high wear resistance.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Rod End Bearings / Standard

  MISUMI

  [Material] Main body EN 1.1181 Equiv.; Connection thread form: you can choose male or female thread.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Ball joint heads with female thread

  GANTER

  Ball joint heads GN 648.1 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Rod End Bearings / 90 Deg. Link Ball Type

  MISUMI

  [Material] Holder: High strength zinc alloy, Shaft with ball: EN 1.1181 Equiv. (20 to 28HRC), Boot: NBR type special synthetic rubber "Hardness" Spherical part: 650HV or more.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.17 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Rod End, Male Threaded Type POS

  THK

  This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.
  * The rod end shown in the photo is a representative product.
  Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Ball joint heads with threaded bolt, Stainless Steel

  GANTER

  Stainless Steel-Ball joint heads GN 648.6 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Rod End, Female Threaded Type PHS Type

  THK

  Highly rigid with superior abrasion and corrosion resistance.
  The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.
  
  [Features]
  · Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.
  · Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.02 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rod End Bearings - Stainless Steel, Oil-Free

  MISUMI

  * Those will be the successor to PHSS/PHSOS.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	34.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Ball joint heads with female thread, Stainless Steel

  GANTER

  Stainless Steel-Ball joint heads GN 648.5 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End Bearings / Link Ball with Thread

  MISUMI

  [Material] Retainer: High strength zinc alloy, stem with ball: EN 1.1181 equiv. (20 to 28HRC), boot: NBR type special synthetic rubber "Hardness" Ball part: 650HV or more

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.68 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  GN 648.2 Ball joint heads with threaded bolt

  GANTER

  Ball joint heads GN 648.2 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Igubal rod end bearing oil free type (female screw) KBL(R)M

  IGUS

  Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight KBR(L)M

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.72 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Link Ball, Male Threaded Holder, RBI

  THK

  The mounting bolt and holder are arranged on the same axis, allowing this model to bear an axial load.
  The boot contains grease, providing high lubricity and high abrasion resistance.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.35 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ball studs for ball joints DIN 71803 Form C (K0713)

  KIPP

  [Specifications]
  ・Main Body Material: Steel
  ・Surface finish body: galvanised and passivated
  ・Form: C
  ・Thread M: M5-M14
  ・Standard: DIN 71803
  
  [Features]
  ・Spare part for DIN 71802 ball joints

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.84 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Rod End, Male Threaded Type (Oil Free) NOS-T

  THK

  This model is an oil free type rod end that is basically the same as the female threaded model NHS-T, but has a male thread on the holder end.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.56 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Rod End, Female Threaded Type (Oil Free) NHS-T Type

  THK

  An oil free type rod end that uses self-lubricating synthetic plastic formed between the steel holder and the spherical inner ring.
  The gap on the sliding surface is minimized, allowing accurate link motion to be achieved.
  
  [Features]
  · NHS-T Type (oil free type)

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  L-Ball

  IKO

  [Features]
  · Grease filled part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.96 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Rod End, Female Thread Type PHS Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.27 €
  	Special price
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Axial joints similar to DIN 71802 (K0715)

  KIPP

  [Specifications]
  ・Main Body Material: Steel, Stainless Steel
  ・Thread M: M5-M10
  ・Standard: DIN 71802
  
  [Features]
  ・For transmitting movement processes
  ・Application sectors: machine and vehicle construction,material handling
  ・Temperature range: -30℃to+110℃
  ・Stainless steel version: protected against dust and dirt

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.61 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod End, Male Thread Type POS Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Universal (Metal Rod End Fitting) Ball Joint

  AIRTAC

  Universal (metal rod end fitting) ball joint manufactured by AirTAC, a company highly rated for its low prices and high quality.· Lubricated type universal ball joint

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing external thread, DIN ISO 12240-4 (K0718)

  KIPP

  [Specifications]
  ・Main Body Material: Steel, High carbon steel
  ・Connection screw M: M5-M22
  ・Standard: DIN ISO 12240-4
  
  [Features]
  ・Bearing ball, ball-bearing steel, hardened
  ・Bearing shell with PTFE fabric
  ・Maintenance-free
  ・Version: right or left-hand thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Igubal rod end bearing oil free type (male screw) KAL(R)M

  IGUS

  Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight KAR(L)M

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.72 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Angled ball joints

  GANTER

  Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
  The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.
  For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
  To protect the angled ball point, a dust cap GN 710 can be added.
  The hexagon nut is part of the angled ball joints.
  Dust caps GN 710 have to be ordered seperately.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stainless Steel- Angled ball joints

  GANTER

  Stainless Steel-Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
  The angle of rotation for the type with safety catch (Type CSN) is 15°, without safety catch (Type CN) is 18°.
  For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
  To protect the angled ball point, a dust cap GN 710 can be added.
  The hexagon nut is part of the angled ball joints.
  Dust caps GN 710 have to be ordered seperately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  DIN 71802 Ball joint

  REYHER

  [Specifications]
  ・Main Body Material: Steel
  ・Connection screw M: M5-M14
  ・Standard: DIN 71802
  
  [Features]
  ・Angle joints (ball joints) with threaded shank, hexagon nuts and circlips

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.44 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing external thread, stainless steel, DIN ISO 12240-4 (27629)

  NORELEM

  · Bearing ball, hardened
  
  · Plain bearing, maintenance-free
  
  · Version: right or left-hand thread

  Select to compare

  Configure now
  Starting from∗ ：	36.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Joint pieces, Stainless Steel

  GANTER

  Stainless Steel-Joints pieces GN 752 are designed to be used in combination with St. Steel-Fork heads DIN 71752 respectively Stainless Steel-Fork joints GN 751.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.94 €
  	Special price
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing external thread, stainless steel, DIN ISO 12240-4 (K0720)

  KIPP

  [Specifications]
  ・Main Body Material: Stainless Steel
  ・Connection screw M: M5-M22
  ・Standard: DIN ISO 12240-4
  
  [Features]
  ・Bearing ball, hardened
  ・Plain bearing,maintenance-free
  ・Version: right or left-hand thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Igubal® rod end bearing, male thread, EARM and EALM

  IGUS

  igubal® rod ends can also be used in rough environments. They are corrosion-resistant in humid environments and resistant to weak acids and bases. Depending on the version (HT) the operation temperature is from –30 °C up to +80 °C. Rod ends are also resistant to dirt and dust. Furthermore they are also available for high temperatures ("HT"-from -40°C bis +200°C) and as detectable version ("DT).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.24 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  Pillow Ball

  IKO

  [Features]
  · Contains an oil groove and one oil hole on the outer ring.
  · Does not contain grease.
  · Use with sufficient lubrication.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.43 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  BJT. - Rod ends -Technopolymer

  ELESA

  Rod ends.
  Glass-fibre reinforced polyamide based (PA) special technopolymer.
  BJT. rod ends are remarkably suitable for rotary, oscillating and linear movements even in particularly aggressive environments and when water or humidity, fine dusts, dirt, fabrics and machining residues are present.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.75 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ball joints DIN 71802 Form C (K0734)

  KIPP

  [Specifications]
  ・Main Body Material: Steel
  ・Thread M: M5-M16
  ・Standard: DIN 71802
  ・Form: C
  ・Form-Type: without retaining clip
  
  [Features]
  ・Enables transmission and redirection of forces
  ・Application sectors: machine and vehicle construction, material handling
  ・Steel or stainless steel
  ・Version: right or left-hand thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.84 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing external thread, narrow version, DIN ISO 12240-4 (K0722)

  KIPP

  [Specifications]
  ・Main Body Material: Steel, High carbon steel
  ・Connection screw M: M6-M20
  ・Standard: DIN ISO 12240-4
  
  [Features]
  ・Bearing ball, hardened ball-bearing steel
  ・Plain bearing,maintenance-free
  ・Space-saving
  ・Version: right or left-hand thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball joints DIN 71802 Form C (27650)

  NORELEM

  · Enables transmission and redirection of forces
  
  · Application sectors: machine and vehicle construction, material handling
  
  · Steel or stainless steel
  
  · Version: right or left-hand thread

  Select to compare

  Configure now
  Starting from∗ ：	2.21 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Axial joints similar to DIN 71802 (27665)

  NORELEM

  · For transmitting movement processes
  
  · Application sectors: machine and vehicle construction, material handling
  
  · Temperature range: -30 °C to +110 °C
  
  · Stainless steel version: protected against dust and dirt

  Select to compare

  Configure now
  Starting from∗ ：	6.73 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod End Bearing, Right Male Thread, Fluoropolymer Type 3 Piece HRT-E

  MINEBEA

  Comprised of a spherical bearing placed into the rod end body. The main body material is chrome molybdenum steel which has a hardness of HRC35 and tensile strength of 980N/mm2 or more. The 3-piece rod end is widely used in places with extreme performance requirements. The spherical race material can be selected to suit the application.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Angled ball joints with rivet ball shank

  GANTER

  Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
  The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.
  For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
  To protect the angled ball point, a dust cap GN 710 can be added.
  The hexagon nut is part of the angled ball joints.
  Dust caps GN 710 have to be ordered seperately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  None Open Bearing Rod ends E Series / Male thread, Female thread

  SKF

  [Specifications]
  ・Thread type: Male thread, Female thread
  ・Seal: None open bearing
  
  None Open Bearing Rod ends E Series

  Select to compare

  Configure now
  Starting from∗ ：	39.13 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Rod ends igubal with plain bearing external thread, similar to DIN ISO 12240-4 (K1465)

  KIPP

  [Specifications]
  ・Main Body Material: IGUMID
  ・Thread M: M5-M20
  ・Standard: DIN ISO 12240-4
  
  [Features]
  ・Very high rigidity
  ・Suitable for rotary, oscillating and linear movements
  ・Insensitive to dirt and resistant to corrosion and chemicals
  ・Maintenance-free

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.07 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing internal thread, DIN ISO 12240-4 (K0719)

  KIPP

  [Specifications]
  ・Main Body Material: Steel, High carbon steel
  ・Connection screw M: M5-M22
  ・Standard: DIN ISO 12240-4
  
  [Features]
  ・Bearing ball, hardened ball-bearing steel
  ・Bearing shell with PTFE fabric
  ・Maintenance-free
  ・Version: right or left-hand thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends with ball bearing external thread, DIN ISO 12240-4 (27625)

  NORELEM

  · For transmitting movement processes
  
  · Hardened and permanently lubricated ball bearing
  
  · Bearing play 15–40 µm
  
  · Cover washers for sealing
  
  · Version: right or left-hand thread

  Select to compare

  Configure now
  Starting from∗ ：	47.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing external thread, DIN ISO 12240-4 (27627)

  NORELEM

  · Bearing ball, ball-bearing steel, hardened
  
  · Bearing shell with PTFE fabric
  
  · Maintenance-free
  
  · Version: right or left-hand thread

  Select to compare

  Configure now
  Starting from∗ ：	20.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing internal thread, DIN ISO 12240-4 (27628)

  NORELEM

  · Bearing ball, hardened ball-bearing steel
  
  · Bearing shell with PTFE fabric
  
  · Maintenance-free
  
  · Version: right or left-hand thread

  Select to compare

  Configure now
  Starting from∗ ：	21.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball studs for ball joints DIN 71803 Form C (27656)

  NORELEM

  · Spare part for DIN 71802 ball joints

  Select to compare

  Configure now
  Starting from∗ ：	1.01 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...