Eye-Bolts, U-Bolts for Plumbing（Screw Nominal (M)：M16）
Search by sub-category
Filter products by: Technical Standard
-
DIN
?* Information on days to ship and prices
-
- Promotional pricing ends 31/12/2024
Swing Bolts, DIN 444, form B
HALDER
Swing bolts similar to DIN 444 however, steel design with higher quality 8.8. The stainless steel A2-50 design has a tensile strength of min. 500 N/mm2.- 3D CAD data available
Configure nowStarting from∗ ： 9.05 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Threaded Lifting Pins, self-locking
HALDER
Heavy-duty lifting element for quick and easy use, with moveable shackle and locking stud to provide protection against unintentional unlocking. For lifting loads, the threaded lifting pin is inserted into a threaded hole. In contrast to a ringbolt, time-consuming screwing in and out is therefore unnecessary.
All versions are corrosion-protected. The version made from stainless steel is also resistant to corrosion and weathering, so it is also suitable for external use. In addition, the high-strength, precipitation-hardened pin makes extreme loads possible.
[Operation]
The threaded elements are unlocked by pressing the button.Configure nowStarting from∗ ： 196.63 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Threaded Lifting Pins, self-locking, with rotatable shackle
HALDER
MaterialPin part
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4542, precipitation-hardenedPress button
- • Aluminium, orange, anodised
Threaded element
- • Stainless steel 1.4542, precipitation-hardened
Shackle
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4571Spring
- • Stainless Steel
Assembly
Threaded lifting pins can be mounted into a thread that is true to gauge.
Mounting:
- • Press in the button and hold it down.
• Insert the threaded lifting pin.
• Release the button (The button must be back in its original position.).
• Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
• It must be ensured that the threaded segments are engaged in the mounting thread.Dismantling:
- • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
• Press in the button and hold it down.
• Remove the threaded lifting pin.
• Release the button.Operation
Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.
- 3D CAD data available
Configure nowStarting from∗ ： 318.78 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Threaded Lifting Pins, self-locking, for centre holes according to DIN 332
HALDER
MaterialPin part
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4542, precipitation-hardenedPress button
- • Aluminium, orange, anodised
Threaded element
- • Stainless steel 1.4542, precipitation-hardened
Shackle
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4571Spring
- • Stainless Steel
Assembly
Threaded lifting pins can be mounted into a thread that is true to gauge.
Mounting:
- • Press in the button and hold it down.
• Insert the threaded lifting pin.
• Release the button (The button must be back in its original position.).
• Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
• It must be ensured that the threaded segments are engaged in the mounting thread.Dismantling:
- • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
• Press in the button and hold it down.
• Remove the threaded lifting pin.
• Release the button.Operation
Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.
- 3D CAD data available
Configure nowStarting from∗ ： 199.48 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Screw Nominal (M) |
| Length L (mm) |
| Material |
| Surface Treatment |
| Pitch(mm) |
| Tip Shape |
| Strength Class (Steel) |
| Thread Type |
| Sales Unit |
| Screw Nominal (inch) |
| Application |
| Screw Type |
| Technical Standard |
|
|
|
| |
| Brand | HALDER | HALDER | HALDER | HALDER |
| Product Series | Threaded Lifting Pins, self-locking, for centre holes according to DIN 332 | |||
| CAD |
|
|
| |
| Starting from∗ | 9.05 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 196.63 € *Unit price with basic configuration | 318.78 € *Unit price with basic configuration | 199.48 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | 2 Days | 3 Days | 3 Days |
| Screw Nominal (M) | M16 | M16 | M16 | M16 |
| Length L (mm) | 60 ～ 150 | 24 | - | - |
| Material | Stainless Steel ～ Steel | Stainless Steel ～ Steel | - | - |
| Surface Treatment | - | - | - | - |
| Pitch(mm) | - | - | - | - |
| Tip Shape | Flat End | Flat End | - | - |
| Strength Class (Steel) | 8.8 | - | - | - |
| Thread Type | Metric Coarse | Metric Coarse | - | - |
| Sales Unit | - | Low Quantity (Available beginning with 1 pc.) | - | - |
| Screw Nominal (inch) | - | - | - | - |
| Application | Standard | Heat Resistance / Chemical Resistance / High Strength | - | - |
| Screw Type | Semi-finished Bolt | - | - | - |
| Technical Standard | DIN | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Nominal (M)
-
Length L (mm)
-
Material
-
Surface Treatment
- Not Provided
- Black Oxide
- Black Oxide
- Trivalent Chromate
- Bright Chrome Plating
-
Pitch(mm)
-
Tip Shape
-
Flat End -
Rounded End
-
-
Strength Class (Steel)
-
Thread Type
- Metric Coarse
- Whit Coarse
-
Sales Unit
-
Screw Nominal (inch)
-
Application
-
Screw Type
- Semi-finished Bolt
Brand
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 1 Day or Less
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 12 Days or Less
- 14 Days or Less
Categories related to Eye-Bolts, U-Bolts for Plumbing
-
- Machine Screws
- Micro Screws, Pan Head Machine Screws for Precision Instruments
- Screw-Washer Assembly
- Self Tapping Screws, Taptite High Tech Screws
- Self-Drill Screws
- Tamper Proof Button Head Cap Screws
- Hex Bolts
- Hexagon socket screws
- Flat Head Screws
- Small Screws
- Screws with Through Hole
- Hex Socket Button Head Cap Screws
- Hex Socket Flat Head Cap Screws
- Unified screw, Inch screw
- Set screws
- Threaded Rods / Threaded Bolts / Stud Bolts
- Wing Screws / Knurled Screws / Ornamental Screws
- Square bolts
- Plastic Screws
- Cover Screws
- Shoulder Bolts / Reamer Bolts
- Eye-Bolts, U-Bolts for Plumbing
- U-Bolts
- Fastening Related Components
- Bolt
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.