Thread Inserts（Type：Self-Tapping）

?* Information on days to ship and prices

• 

  Self-Tapping Inserts / Slotted

  MISUMI

  It is a split groove threaded insert, threaded on both the inner and outer diameters.
  Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat, Slotted Type 302

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat, Ultra Coarse Outside Screw, Type 309

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	1.34 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat, Chip-Free / Short, Type 337

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel / Insert Nut Threaded Type / IRU

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat Three-Hole / Short 307 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Type 308, 3-Hole / Long Size

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.12 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Brass Insert Nut (Screw-In Type) IRB / IRB-C

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Screwsert (Type SCT)

  JAPAN DRIVE-IT

  [Type] Self-tapping Used
  [Application] Resin: General
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
  [L](D = screw diameter M) 2D 2.5D
  [Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	1.34 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Ensat Expanded Slot Type, Model 302, Inch Type

  KKV

  [Features]
  · Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
  · The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
  · If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
  
  [Materials]
  SUM22L free-cutting steel (equivalent), hexavalent chromate

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat, 3-Hole / Long Size, 308 Type, Stainless Steel

  SUNCO

  [Nominal M] 16
  [Material] Stainless Steel
  [Surface Processing] None

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	19.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention / Slotted) / IRU-SW

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	1.70 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Brass, Ensat, Screw Plastic Deformation, Type 305

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat, Chip-Free / Long, Type 338

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Iron, Ensat, with Pin / Long Type 318

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Select to compare

  Configure now
  Starting from∗ ：	5.73 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Iron, Ensat Small Outside Three-Hole / Short 347 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Select to compare

  Configure now
  Starting from∗ ：	1.17 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Aluminum Insert Nut (Screw-In Type) IRL-B / IRL-K

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less
  [Treatment] Black anodized (BAL)/Kanigen plating

  Select to compare

  Configure now
  Starting from∗ ：	0.76 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Iron, Ensat, Small Outside Diameter Slotted Type 303

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.67 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass Insert Nut (Screw-In Type) IRB-W / -CW

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Select to compare

  Configure now
  Starting from∗ ：	1.01 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Aluminum Insert Nut (Screw-In Type / Coated With Loosening Prevention Agent) IRL-BW/-KW

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8
  [Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less
  [Treatment] Black anodized (BAL)/Kanigen plating

  Select to compare

  Configure now
  Starting from∗ ：	1.10 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Iron, Ensat Small Outside Three-Hole / Long348 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...