Ejector Sleeves

Data to be displayed
30
45
60
Sort
  1. 1
Brand
Product Series
Starting from
Min. Shipping Days
Product composition
Material
Surface treatment
Head thickness
Shaft diameter tolerance
D/P (Shaft diameter)(mm)
V (Hole diameter)(mm)
Concentricity between the hole and shaft diameters
Boring method
Inner dia. tolerance
Tapered or not
Center pin tip shape

    Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

      Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

        Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

          Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

            Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

              Short Ejector Sleeves (Bushings For Ejector Pins)

                Short Ejector Sleeves (Bushings for straight ejector pins)

                  Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

                    Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

                      Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                        Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

                          Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

                            Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

                              Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                                Brand

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                Product Series

                                Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

                                Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

                                Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

                                Short Ejector Sleeves (Bushings For Ejector Pins)

                                Short Ejector Sleeves (Bushings for straight ejector pins)

                                Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                                Starting from

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                Min. Shipping Days Quote Quote Quote Quote Quote Quote Quote Quote Quote Quote Quote Quote Quote Quote Quote
                                Product compositionSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeve
                                MaterialSKH51SKD61SKD61SKH51SKD61SKD61SKH51SKH51SKD61SKD61SKD61SKD61SKD61SKD61SKD61
                                Surface treatmentNoNitridedNitridedNoNitridedNitridedNoNoNitridedNitridedNitridedNitridedNitridedNitridedNitrided
                                Head thickness4mm(T4) / 6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)4mm(T4)4mm(T4)4mm(T4)6mm(JIS) / 8mm(JIS)4mm(T4)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)
                                Shaft diameter tolerance0/-0.005 / -0.01/-0.02-0.01/-0.02 / -0.01/-0.03-0.01/-0.020/-0.005 / -0.01/-0.02-0.01/-0.02 / -0.01/-0.03-0.01/-0.020/-0.005 / -0.01/-0.020/-0.005-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02 / -0.01/-0.03-0.01/-0.02-0.01/-0.02
                                D/P (Shaft diameter)(mm)3.2 ~ 143.5 ~ 203.5 ~ 203.2 ~ 144 ~ 204 ~ 102.5 ~ 82.5 ~ 84 ~ 104 ~ 103.5 ~ 104 ~ 164 ~ 203.5 ~ 104 ~ 16
                                V (Hole diameter)(mm)0.8 ~ 12.21.5 ~ 161.5 ~ 160.8 ~ 12.21.5 ~ 151.5 ~ 81 ~ 6.81 ~ 61.5 ~ 81.5 ~ 81.5 ~ 7.91.5 ~ 3001.5 ~ 151.5 ~ 81.5 ~ 12
                                Concentricity between the hole and shaft diameters◎0.005 / ◎0.01◎0.06◎0.06◎0.01◎0.06◎0.06◎0.01◎0.005◎0.03◎0.03◎0.03◎0.06◎0.06◎0.03◎0.06
                                Boring methodGrindingReamingReamingWire cutting & polishingReamingReaming-GrindingReamingReamingReamingReamingReamingReamingReaming
                                Inner dia. tolerance+0.005/0 / +0.01/0H7H7+0.01/0H7H7+0.005/0 / +0.01/0+0.005/0H7H7H7H7H7H7H7
                                Tapered or notNoNoNoNoNoNoYesYesNoNoNoNoNoNoNo
                                Center pin tip shapeNoNoNoNoNoNoNoNoNoNoNoNoNoNoNo

                                Loading...

                                1. 1

                                Categories related to Ejector Sleeves