MIRAI INDUSTRY Installation Parts

?* Information on days to ship and prices

• 

  Adjustable Fixed Bar

  MIRAI INDUSTRY

  [Features]
  - Simple installation with single-sided mounting.
  - Use to mount a box to a lightweight partition wall.
  - No need to purchase accessories for different stud sizes or types; this is all you need to mount a box.
  - Convenient for locations with narrow stud spacing (can be used even when cut down).
  - Use the included double-sided tape for temporary fastening is possible; mounting to lightweight studs is also simple.
  - The manufacturer's slide box includes holes for mounting, so it can be easily mounted to the center (vertical) position of an adjustable fixed bar (exclusions apply).
  - The KGP-230 (total length 230 mm) can be mounted to any location, provided the studs are installed at an interval of 450 mm.
  - The slide box (thickness 36mm) will fit right in if you align the box with the stud end before mounting.

  Starting from∗ ：	3.03 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Free-Mounting Plate, Vertical Type

  MIRAI INDUSTRY

  [Features]
  · A plastic mounting plate that enables equipment such as breakers, switches, watt-hour meter boxes and instrument boxes to be mounted in any position.
  · Band through holes are provided for securing onto poles, etc., using stainless steel bands
  · Two cabling knockouts convenient for routing VE pipes are provided respectively on the top, bottom, left, and right side surfaces.
  (VE pipe [16] for BPF-3622, 4222, and 4922, and VE pipe [22] for BPF-5042, 6530, and BFO-5042)

  • Volume Discount

  Starting from∗ ：	5.15 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Free Mounting Plate (With Knockouts)

  MIRAI INDUSTRY

  [Features]
  · Two handy knockouts for routing VE tubes are provided on each of the top, bottom, left and right side surfaces respectively. · (VE tube [16] for BF-3622, 4222, and 4922, and VE tube [22] for BF-6530)
  · With conduit knockouts, ideal for mounting instrument boxes.

  Starting from∗ ：	26.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Instrument Box Mounting Plate

  MIRAI INDUSTRY

  [Specifications]·Can be mounted to pole bands. ·Compatible instrument box: 3-phase small (M/L)

  Starting from∗ ：	16.22 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Energy Meter / Instrument Box Mounting Plate

  MIRAI INDUSTRY

  [Features]
  · Can be mounted to pole bands.
  For the BP-2U model, band through-holes (10‑mm wide) are provided for securing onto fixtures such as poles using stainless steel bands.

  Starting from∗ ：	9.06 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Integrated Watt-Hour Meter Mounting Plate

  MIRAI INDUSTRY

  [Features]
  · Can be mounted to pole bands.
  For the B-2U model, band through-holes (10‑mm wide) are provided for securing onto fixtures such as poles using stainless steel bands.
  · The B-2H is a 55‑mm thick type that can hold excess cable and features knockouts for feeding through VE tubes (22/28/36) and molded cable ducts (MD-40/70).

  Starting from∗ ：	14.99 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  WB Mounting Stay (For Temporary Installation)

  MIRAI INDUSTRY

  [Features]
  · Used for mounting wall boxes onto walls or single pipes, etc.
  · The mounting stay also can be used vertically.

  • Volume Discount

  Starting from∗ ：	19.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pole Band (For Stainless Steel Band)

  MIRAI INDUSTRY

  [Features]
  · A pole band for mounting stainless steel bands onto steel pipes or concrete poles.
  · Enables various boxes/equipment to be easily mounted using wood screws.
  · Clamps and stays are not required, nor are drilling holes or welding steel pipes.
  · Can be mounted on a Rakudashi Pole (MRD-63Y) as-is.
  　(Use the box fixture included with Rakudashi Pole. [Excludes POB-F, POB-1F])

  • Volume Discount

  Starting from∗ ：	1.61 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pole Band Kit

  MIRAI INDUSTRY

  [Features]
  · Kit for mounting wall boxes, mounting plates, etc., to a pole.　(Secured at 2 points [top/bottom])
  · With plastic end caps to prevent injury.

  • Volume Discount

  Starting from∗ ：	67.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  L Bracket For Mirakku Hanger

  MIRAI INDUSTRY

  [Features]
  · Used for mounting Mirakku Hangers at a right angle onto walls or poles.

  • Volume Discount

  Starting from∗ ：	8.84 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pole Band Bracket For Mirakku Hanger

  MIRAI INDUSTRY

  [Features]
  · A metal fixture used for securing Mirakku Hangers onto poles with stainless steel bands, etc.
  (Bands up to 30 mm in width can be mounted to MNBKS.)
  · Allowable static load: MNBS vertical direction 98 N (10 kgf): MNBKS vertical direction 196 N (20 kgf)
  *Cannot be used with FRP products.

  Starting from∗ ：	7.52 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pole Band For Steel Pipe

  MIRAI INDUSTRY

  [Features]
  · Combines the Mirakku Hanger with a duct clip. Used for mounting wall boxes or wooden boards for mounting wall boxes onto poles.
  · · With screw and end caps to prevent injury.

  • Volume Discount

  Starting from∗ ：	19.95 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pole Band For Steel Pipe (U Bolt Type)

  MIRAI INDUSTRY

  [Features]
  · Combination of Mirakku Hanger and U bolt.　Used for mounting wall boxes, etc., onto poles.

  • Volume Discount

  Starting from∗ ：	9.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...