MISUMI Carbide Square End Mills（Torsion Angle (θ)：High Helix (45˚ to 60˚)）
Search by sub-category
Square End Mills (Carbide)
Multi-Function Square End Mills (Carbide)
High Helical End Mills (Carbide)
Roughing End Mills (Carbide)
Long Neck Square End Mills (Carbide)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model
MISUMI
Achieves high-efficiency machining with the 3-geometry that's emphasized the rigidity!- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price- Volume Discount
- XAL
- General Steel
- 4 Flutes
Starting from∗ ： 18.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)
MISUMI
[Features]
-Cutting edge runout accuracy within 5µm (compared to manufacturer's measurements), back taper within 5µm and shank diameter tolerance h5 standards are used, making it ideal for lateral surface machining that requires high precision using high quality tools with low quality variation
-Designed with a blade shape that emphasises sharpness with positive blade and cutting edge sharpness corner, suitable for machining raw material such as carbon steel.- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Starting from∗ ： 77.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model
MISUMI
[Features]
-The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting of grooves with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose 30° helix square cutter
-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Min. Shipping Days ： 5 Days -
DLC Coated Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model
MISUMI
The durability is enhanced with the adoption of the 4-geometry- Volume Discount
- DLC
- Aluminum
- 4 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model
MISUMI
Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 3 times the outer diameter is available at an ultra low price- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Starting from∗ ： 14.05 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price- Volume Discount
- XAL
- General Steel
- 3 Flutes
Starting from∗ ： 18.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-blade shape, it is resistant to chattering and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-blade tool
-Adopting the stub-blade length, which is 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Compared with square cutters with 30° spiral angle, both rotation and feed are more than twice as fast
-The 45° spiral angle makes it ideal for high-speed machining compared with the general 30° spiral angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape makes it resistant to chatter, The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-The 45° helix angle makes it ideal for high-speed machining compared to a 30° helix angle for general purpose
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape, it is resistant to chatter,
-The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-This product has an average cutting edge length between TSC-HEM3S (short cutting edge length) and TSC-HEM3R (normal cutting edge length), hence it is called "SR Cutting Edge Length. "
-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose cutters with 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- SR
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flute shape, it is resistant to chatter and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-flute tool
-Comparable to 30° helix angle square shoulder cutters, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle cutters
-The coating has high oxidation resistance and hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- L (Long)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model
MISUMI
[Features]
-High performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
-The application of a rounded cutting edge at the rear end of the flute suppresses machining streaks that occur when machining the side face in multiple steps (product shown in Fig. 3 only).
-The helix angle of 45° makes it ideal for high-speed machining, compared with the general helix angle of 30°
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Starting from∗ ： 64.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables grooves to be cut with a depth of cut equivalent to that of a 2-blade tool
-By adopting a stitch groove length 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose cutter with 30° helix angle
-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating characteristics
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model
MISUMI
[Features]
-The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
-This product has an average flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (normal flute length), hence it is called "SR flute length". "
-Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose end mills with 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- SR
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Due to the unique shape of the chip groove, groove cutting can be performed with a depth of cut comparable to that of a 2-groove.
-The application of a rounded blade at the rear end of the groove suppresses machining streaks that occur during multi-step machining of the side face. (Product in Fig. 3 only)
-The 45° helix angle makes it ideal for high-speed machining compared to the general 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Starting from∗ ： 50.99 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide long neck square end mill, 4-flute / long neck model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Can select optimum body length for machining deep parts of workpiece
-Optimal for machining in low to medium turning range due to universal 30° helix angle
-It has coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 4 Flutes
Min. Shipping Days ： 8 Days -
TSC series carbide long neck square end mill, 2-flute / long neck model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Can select the optimum body length for machining deep parts of the workpiece
-Optimal for machining in the low to medium rotation range due to the universal 30° helix angle
-It has a coating with high oxidation resistance and high hardness and achieves a long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 2 Flutes
Min. Shipping Days ： 8 Days -
TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Multifunctional square long-neck type with high feed capability and excellent durability
-The 45° helix angle makes it ideal for high-speed machining compared to general 30° helix angle
-It has coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model
MISUMI
The high precision high helical end mill for shrink fit holder is ideal for side finishing- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- B (Stub)
Starting from∗ ： 81.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model
MISUMI
[Features]
When machining raw material, heat-treated steel, aluminium, etc., finishing standing walls for mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, sharp corners of the bottom edge and strong bevel angle of 53°
-High tool rigidity minimises tool tilt during side milling.- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model
MISUMI
[Features]
-When machining raw material, heat-treated steel, aluminium, etc., when finishing standing walls of the mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, the sharp corners of the bottom edge and the strong bevel angle of 53°
-High tool rigidity minimises tool tilt during side milling.- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, 45° spiral / fine pitch / short model
MISUMI
[Features]
-High-speed rotary machining is possible with 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model
MISUMI
[Features]
-High-speed rotary machining is possible with 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, 45° spiral / fine pitch / long model
MISUMI
[Features]
-High-speed rotary machining is possible by adopting 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- L (Long)
Min. Shipping Days ： 5 Days -
TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model
MISUMI
[Features]
-High-speed rotary machining is possible by using a 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-Long shank, ideal for milling deep cavities
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating features.- Volume Discount
- TS
- General Steel
- R (Regular)
Min. Shipping Days ： 5 Days -
XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model
MISUMI
[Features]
-Designed with a tool shape that increases rigidity for machining high hardness steels
-Since it is designed with a large rake angle, it can also be used on machines where the cutting speed is not increased
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- High-Hardness Steel
- Multi-Flutes （5 ~）
Starting from∗ ： 32.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model
MISUMI
The expensive long flute type for high hardness is offered at an affordable price- Volume Discount
- TiAlN
- High-Hardness Steel
- Multi-Flutes （5 ~）
Starting from∗ ： 37.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model
MISUMI
Demonstrates phenomenal performance in processing the difficult-to-cut SUS304- Volume Discount
- TS
- SUS
- 3 Flutes
- S (Short)
Starting from∗ ： 54.29 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model
MISUMI
Ideal for the standing-wall finish of stainless steel- Volume Discount
- TS
- SUS
- 3 Flutes
- R (Regular)
Starting from∗ ： 75.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model
MISUMI
An end mill for titanium machining that performs medium roughing and finish machining at the same time- Volume Discount
- TS
- Titanium
- 4 Flutes
- S (Short)
Starting from∗ ： 88.65 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model
MISUMI
Demonstrates the tremendous durability and finishing precision in aluminum machining- Volume Discount
- DIA
- Aluminum
- 2 Flutes
- R (Regular)
Starting from∗ ： 65.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Regular Model
MISUMI
Demonstrates the tremendous durability and finishing precision in aluminum machining- Volume Discount
- DIA
- Aluminum
- 3 Flutes
- R (Regular)
Starting from∗ ： 82.54 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model
MISUMI
Short flute length that suppresses chattering- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model
MISUMI
The cutting performance of aluminum has been improved by the combination of sharp edge and DLC coating- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model
MISUMI
4D flute length type that's ideal for deep engraving- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- L (Long)
Min. Shipping Days ： 5 Days -
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model
MISUMI
3-flute structure that's excellent in discharging chips- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model
MISUMI
The unique tip pocket shape improves the discharging of chips- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
MISUMI
Given the rounded edge on the blade rear end, it suppresses machining streaks- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- B (Stub)
Starting from∗ ： 65.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model
MISUMI
A multi-functional type that's capable of everything from thrusting to continuous high-efficiency machining of aluminum- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- B (Stub)
Starting from∗ ： 22.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model
MISUMI
A non-coated type that does not impair the sharpness of the blade- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model
MISUMI
Affordable, non-coated type of the Aluminum Processing Series- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model
MISUMI
The large rake angle prevents the built-up edge that's unique to aluminum- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- L (Long)
Min. Shipping Days ： 5 Days
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model | XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model | TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less) | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model | DLC Coated Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model | Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model | XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model | TSC series carbide long neck square end mill, 4-flute / long neck model | TSC series carbide long neck square end mill, 2-flute / long neck model | TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model | TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model | TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model | TSC series carbide roughing end mill, 45° spiral / fine pitch / short model | TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model | TSC series carbide roughing end mill, 45° spiral / fine pitch / long model | TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model | TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model | TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model | Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model | Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Regular Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model | Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model | Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model | Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model | Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model | ||||
| Starting from∗ | - Volume Discount | 18.80 € *Unit price with basic configuration Volume Discount | 77.90 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | 14.05 € *Unit price with basic configuration Volume Discount | 18.22 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 64.59 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 50.99 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 81.46 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 32.80 € *Unit price with basic configuration Volume Discount | 37.11 € *Unit price with basic configuration Volume Discount | 54.29 € *Unit price with basic configuration Volume Discount | 75.77 € *Unit price with basic configuration Volume Discount | 88.65 € *Unit price with basic configuration Volume Discount | 65.31 € *Unit price with basic configuration Volume Discount | 82.54 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 65.45 € *Unit price with basic configuration Volume Discount | 22.12 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 8 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Blade diameter (D)(φ) | 0.5 ～ 20 | 2 ～ 20 | 3 ～ 12 | 2 ～ 20 | 0.5 ～ 12 | 0.5 ～ 20 | 1 ～ 12 | 1 ～ 12 | 1 ～ 20 | 3 ～ 16 | 1 ～ 20 | 2 ～ 20 | 2 ～ 20 | 1 ～ 16 | 1 ～ 20 | 3 ～ 16 | 1 ～ 20 | 2 ～ 22 | 1.5 ～ 5 | 1.5 ～ 5 | 1 ～ 6 | 3 ～ 12 | 1 ～ 12 | 1 ～ 20 | 5 ～ 20 | 3 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 6 ～ 20 | 3 ～ 16 | 3 ～ 12 | 6 ～ 20 | 1 ～ 12 | 1 ～ 12 | 1 ～ 20 | 0.5 ～ 20 | 3 ～ 12 | 1 ～ 12 | 0.5 ～ 20 | 5 ～ 22 | 1 ～ 12 | 0.5 ～ 20 | 0.5 ～ 20 | 3 ～ 12 |
| work material | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] |
| Blade length (ℓ)(mm) | 1.5 ～ 60 | 5 ～ 38 | 10 ～ 30 | 5 ～ 75 | 1.5 ～ 28 | 1.5 ～ 60 | 1.5 ～ 26 | 1.5 ～ 18 | 3 ～ 38 | 5 ～ 40 | 4 ～ 56 | 5 ～ 75 | 3.5 ～ 30 | 1.5 ～ 24 | 3 ～ 38 | 5 ～ 40 | 4 ～ 56 | 3.5 ～ 30 | 3 ～ 10 | 3 ～ 10 | 1.5 ～ 13 | 4.5 ～ 18 | 2 ～ 24 | 2.5 ～ 45 | 10 ～ 38 | 15 ～ 45 | 25 ～ 65 | 15 ～ 45 | 13 ～ 44 | 26 ～ 76 | 7 ～ 35 | 10.5 ～ 38 | 14 ～ 42 | 3 ～ 36 | 3 ～ 36 | 2 ～ 40 | 1.5 ～ 60 | 5 ～ 48 | 2 ～ 24 | 1.5 ～ 60 | 9 ～ 33 | 1.5 ～ 18 | 1 ～ 40 | 1.5 ～ 60 | 5 ～ 48 |
| Number of flutes(sheet) | 3 | 4 | 4 ～ 6 | 4 | 4 | 2 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 4 | 2 | 3 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 6 ～ 8 | 3 | 3 | 4 | 2 | 3 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 2 | 2 | 2 |
| Type | Square | Square | High Helical | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | High Helical | High Helical | High Helical | Roughing | Roughing | Roughing | Roughing | High Helical | High Helical | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Coating | Non-Coated | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | Non-Coated | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Dia Coat | Dia Coat | DLC | DLC | DLC | DLC | DLC | DLC | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Shank diameter (d)(mm) | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 6 ～ 20 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 6 ～ 12 | 4 ～ 20 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 4 ～ 20 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 6 ～ 20 | 6 ～ 16 | 6 ～ 12 | 6 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 |
| Overall Length (L)(mm) | 40 ～ 130 | 45 ～ 125 | 60 ～ 100 | 60 ～ 150 | 40 ～ 80 | 40 ～ 130 | 45 ～ 100 | 60 ～ 100 | 60 ～ 110 | 60 ～ 110 | 60 ～ 130 | 60 ～ 150 | 80 ～ 200 | 60 ～ 110 | 60 ～ 110 | 60 ～ 110 | 60 ～ 130 | 80 ～ 200 | 40 ～ 45 | 40 ～ 45 | 50 ～ 100 | 50 ～ 75 | 60 ～ 100 | 60 ～ 130 | 60 ～ 110 | 60 ～ 130 | 100 ～ 150 | 100 ～ 150 | 57 ～ 104 | 70 ～ 140 | 60 ～ 105 | 60 ～ 100 | 60 ～ 120 | 40 ～ 80 | 40 ～ 80 | 40 ～ 110 | 40 ～ 130 | 60 ～ 100 | 40 ～ 80 | 40 ～ 130 | 80 ～ 200 | 40 ～ 80 | 40 ～ 110 | 40 ～ 130 | 60 ～ 100 |
| Underneck length (ℓ1)(mm) | 23 ～ 92 | - | - | 30 ～ 112 | 22 ～ 50 | - | - | 14 ～ 68 | 18 ～ 73 | 22 ～ 78 | 26 ～ 92 | 30 ～ 112 | 30 ～ 140 | 14 ～ 74 | 18 ～ 72 | 22 ～ 78 | 26 ～ 92 | 30 ～ 140 | 8 ～ 25 | 8 ～ 25 | 4 ～ 60 | - | 17 ～ 70 | 20 ～ 92 | 17 ～ 72 | 20 ～ 92 | 30 ～ 112 | 20 ～ 95 | - | - | - | - | - | - | - | 17 ～ 73 | 23 ～ 92 | 29 ～ 70 | 17 ～ 50 | 23 ～ 92 | - | 3 ～ 36 | 17 ～ 73 | 23 ～ 92 | 29 ～ 70 |
| Machining Application | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking |
| Blade tip shape | With Lead | With Lead | Sharp Edge | Sharp Edge / With Lead | Sharp Edge | - | With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | C plane | C plane | C plane | C plane | With Lead | With Lead | C plane | C plane | C plane | Sharp Edge | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | Micro R | With Lead | Sharp Edge | Sharp Edge | Sharp Edge |
| Torsion Angle (θ) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.775
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.875
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.4
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.96
- 3
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
- 3.96
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.3688
- 4.4
- 4.5
- 4.6
- 4.7
- 4.78
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.5626
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9502
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.5438
- 7.6
- 7.7
- 7.8
- 7.9
- 7.9502
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.1186
- 9.2
- 9.3
- 9.4
- 9.5
- 9.52
- 9.525
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.3124
- 10.4
- 10.49
- 10.5
- 10.6
- 10.7
- 10.7188
- 10.8
- 10.9
-
11～11.9126
- 11
- 11.0998
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.5062
- 11.6
- 11.7
- 11.8
- 11.9
- 11.9126
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.8938
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.4874
- 13.5
- 13.6
- 13.7
- 13.8
- 13.8938
-
14～14.9
- 14
- 14.1
- 14.2
- 14.2748
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.875
- 15.88
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.4498
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.2626
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.05
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.6502
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.4376
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.225
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.4188
- 23.5
- 23.6
- 23.7998
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.1874
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.0002
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7876
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.575
- 28.8
-
29～29.8
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.8
-
30～30.9626
- 30
- 30.1752
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
- 30.9626
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.75
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.3502
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.8
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
-
36～36.8
- 36
- 36.4
- 36.4998
- 36.5
- 36.8
-
37～37.6936
- 37
- 37.2
- 37.5
- 37.6
- 37.6936
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.7002
- 39
- 39.2
- 39.5
- 39.6
- 39.7002
-
40～40.8
- 40
- 40.4
- 40.4876
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.28
- 41.5
- 41.6
-
42～42.8498
- 42
- 42.4
- 42.5
- 42.8
- 42.8498
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.4312
- 46.5
- 46.8
-
47～47.8
- 47
- 47.2
- 47.5
- 47.6
- 47.8
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.2252
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.1876
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.15
- 57.5
-
58～58.7502
- 58
- 58.5
- 58.7502
-
59～59.5376
- 59
- 59.5
- 59.5376
-
60～60.5
- 60
- 60.5
-
62
-
63～63.5
- 63
- 63.5
-
64
-
65
-
66
-
67
-
70～70.5
- 70
- 70.5
-
72
-
75
-
76
-
77.95
-
78
-
80
-
82
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
115
-
120
-
125
-
130
-
150
-
200
[5-75/1mm Unit(s)]
-
-
Number of flutes(sheet)
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Narrow search by specifying Brand
-
- MISUMI (57)
- NS TOOL (25)
- OKAZAKI SEIKO (19)
- SANDVIK (19)
- DIJET (16)
- OSG (16)
- GUHRING (12)
- NACHI(FUJIKOSHI) (9)
- SANKO MFG (8)
- THE CUT (6)
- KYOCERA (5)
- SPEED TIGER (5)
- UNION TOOL (5)
- 7 LEADERS (4)
- KYOWA SEIKO (2)
- GCT (1)
- PROCHI (1)
- WIDIN (0)
- EIKOSHA (0)
- ASAHI TOOLS (0)
- VAN_HOORN (0)
- ATOM (0)
- TAIYO-TOOL (0)
- TOYO DRILL (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Carbide Square End Mills
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.