- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 to 15:00 (CEST) 16/6/2024. We apologize for the inconvenience.
OSG Carbide Ball End Mills（work material：Quenched and tempered steel）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
WXL-Coated 2-Flute Ball End Type WXL-EBD
OSG
[Features]
· High-accuracy ball end mill coated with WXL hard lubricating film coating.
Proven performance on a wide range of work materials.
Long life regardless of whether being used for dry-type or wet-type machining.- Volume Discount
Starting from∗ ： 49.20 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
2-Flute, Ball End, Miniature, FX-MG-EBD-3
OSG
The use of FX coating and high strength carbide allows a wide range of machining.
Coated for steel
Standard/Alternation category: Manufacturer's standard product
Number of blades (pcs.) 2
Shaft diameter (mm) 3, Total length (mm) 40, Spiral angle: standard spiral (30 to 44°)
R Accuracy (µm) ±10.Starting from∗ ： 84.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Slim Shank, Ball End, FX-SS-EBD
OSG
Shank diameters are 1 mm smaller than blade diameter. Can freely adjust the extension and length.- Volume Discount
Starting from∗ ： 245.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Pencil Short Neck, Ball End (High Precision Type) FX-PCS-EBD-6
OSG
High pencil neck of stiffness and ultra-fine cemented carbide achieves high-speed, high-precision, ultra-life. Eliminate chatter problems in fine shape processing and dug processing.Starting from∗ ： 83.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ball End, Miniature, MG-EBD-3
OSG
Shank diameter (mm) 3, total length (mm) 40, helix angle: standard helix (30 to 44°).Starting from∗ ： 64.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ball End, CBN-EBD
OSG
2-Flute Ball End Type CBN-EBD
-Demonstrates high performance when machining high strength materials and cast iron
-The wide selection of CBN tools allows you to choose the best tool for your application.Starting from∗ ： 235.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ball End, CBN-SXB
OSG
Spiral ball blade with its own twist achieve deep cuts in acute sharpness and small diameter. CBN end mill that can be used in the cut of the CarbideStarting from∗ ： 125.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ball End, FX-MG-EBD
OSG
Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.- Volume Discount
Starting from∗ ： 91.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 56.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ball End, MG-EBD
OSG
Achieves long tool life at medium low speed by adopting the high toughness cemented carbide- Volume Discount
Starting from∗ ： 67.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ball End, WX-EBD
OSG
General-purpose ball end mill for a wide range of workpieces and machining. High toughness carbide-based materials achieve a stable long-term continuous machining.Starting from∗ ： 33.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ball End, WXS-EBD
OSG
High-precision ball end mill that was subjected to a WX super coat of super-hard and ultra-heat. High-speed machining of general steel, of course, but even suitable for high speed direct carving machining of hardened steel.Starting from∗ ： 30.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ball End (Heavy Duty Type) WXL-HS-EBD
OSG
WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions- Volume Discount
Starting from∗ ： 41.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ball End (High Precision Type) FX-EBD-6
OSG
High precision ball end mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center. Ultra-fine carbide based material achieves long tool life in hardened steel high-speed machining.Starting from∗ ： 89.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Long Shank, Ball End, FX-LS-MG-EBD
OSG
Depth of long shank can be processed- Volume Discount
Starting from∗ ： 88.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS
OSG
Ball end mill for heavy cutting that allows high-speed, high-efficiency (large depth of the cut) machining. Shrink-HSK Just Fit short overall length types.- Volume Discount
Starting from∗ ： 87.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD
OSG
Ultra-high accuracy precision grade of ball end mill series for carpentes. Short overall length of shrink-fit holder. HP3 spec comes with a product precision guarantee.Starting from∗ ： 86.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD
OSG
Oil hole is quite useful in the machining of deep parts with chip emission problem.Starting from∗ ： 91.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS
OSG
Extremely increased rigidity ball end mill with oil hole for high hardness steel.- Volume Discount
Starting from∗ ： 95.68 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Pencil Neck, Ball End FX-PC-MG-EBD
OSG
Quality cutting is provided even in large protruding length, due to high rigidity pencil neck.Starting from∗ ： 84.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications- Volume Discount
Starting from∗ ： 63.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Pencil Long Neck, Ball End FX-PCL-EBD
OSG
Ball end mill for deep engraving work that ordinary end mills can't reach.Starting from∗ ： 239.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Long Shank Ball End (High-Efficacy) FXS-LS-EBT
OSG
In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.Starting from∗ ： 104.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Pencil Neck, Ball End (High-Efficacy) FXS-PC-EBT
OSG
In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.Starting from∗ ： 91.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT
OSG
Overturns old notions of deep engraving work with improved high efficiency machining. Unique spiral ball blade prevents vibrations during deep engraving and allows stable high feed cutting.Starting from∗ ： 83.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Ball End (High-Efficacy) FXS-EBT
OSG
Allows high efficiency machining with up to 50% increased table feed due to the ball geometry formed by 3-blades to the center.Starting from∗ ： 83.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Ball End, High-Cut High-Feed Type PHX-DBT
OSG
New concept ball end mill with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.Starting from∗ ： 84.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spherical Ball End FXS-EQD
OSG
Spherical cutting edge prevent chattering in the machining of standing wall. Machining undercut enabled.- Volume Discount
Starting from∗ ： 121.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spherical Ball End GX-EQD-SF
OSG
Ball end mills having spherical cutting tips developed for shrink fitting.Starting from∗ ： 98.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD
OSG
Achieves stable cutting with not only HSK holders but also with L / D large shrink long arbors.- Volume Discount
Starting from∗ ： 83.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Long Neck, Ball End CBN-LN-SXB
OSG
2-Flute Long Neck Ball End Type CBN-LN-SXB
-Achieves deep cut milling even with small diameters. Good cutting quality.
With the effect of spiral cutting, both cutting edge strength and sharpness are achieved.
-CBN sintered body is used for flute material.Starting from∗ ： 110.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD
OSG
WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting RegionsStarting from∗ ： 20.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6
OSG
High-speed, high-accuracy, high-speed machining Long Neck Ball End Mill that sufficiently exhibits performance of the machining center.- Volume Discount
Starting from∗ ： 88.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD
OSG
Long neck ball which has been subjected to WX super coat of super-hard and ultra-heat-resistant. In accordance with the processing shape, freely effective length can be selected.- Volume Discount
Starting from∗ ： 57.40 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD
OSG
Displays effectiveness on a wide range of uses such as metal mold machining to copper electrode processing thanks to the effects of the high hardness lubricating film WXL coating.- Volume Discount
Starting from∗ ： 49.20 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD
OSG
Long neck ball with choice of effective length according to machining form. High tenacity cemented carbide base material achieves a stable cutting in wide range of machining applications.Starting from∗ ： 35.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Long Neck Ball Series WXS Coat 3-Flute Long Neck
OSG
A long neck ball nose cutter with WXS coating.
A corner radius shape that achieves both cutting force and cutting edge rigidity.
Peripheral cutting edge and undercutting specifications to suppress chatter vibration.
A special edge line prevents interference.
Optimum chip groove for excellent chip evacuation.- Volume Discount
Starting from∗ ： 62.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| R Size(mm) |
| Type |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Coating |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| R Precision(μm) |
| Machining Application |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | 2-Flute, Pencil Short Neck, Ball End (High Precision Type) FX-PCS-EBD-6 | 2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS | 2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD | 2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS | 3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT | ||||||||||||||||||||||||||||||||
| Starting from∗ | 49.20 € *Unit price with basic configuration Volume Discount | 84.73 € *Unit price with basic configuration | 245.50 € *Unit price with basic configuration Volume Discount | 83.69 € *Unit price with basic configuration | 64.79 € *Unit price with basic configuration | 235.08 € *Unit price with basic configuration | 125.12 € *Unit price with basic configuration | 91.40 € *Unit price with basic configuration Volume Discount | 56.95 € *Unit price with basic configuration | 67.83 € *Unit price with basic configuration Volume Discount | 33.32 € *Unit price with basic configuration | 30.41 € *Unit price with basic configuration | 41.80 € *Unit price with basic configuration Volume Discount | 89.48 € *Unit price with basic configuration | 88.71 € *Unit price with basic configuration Volume Discount | 87.89 € *Unit price with basic configuration Volume Discount | 86.67 € *Unit price with basic configuration | 91.40 € *Unit price with basic configuration | 95.68 € *Unit price with basic configuration Volume Discount | 84.69 € *Unit price with basic configuration | 63.80 € *Unit price with basic configuration Volume Discount | 239.02 € *Unit price with basic configuration | 104.54 € *Unit price with basic configuration | 91.00 € *Unit price with basic configuration | 83.42 € *Unit price with basic configuration | 83.96 € *Unit price with basic configuration | 84.50 € *Unit price with basic configuration | 121.20 € *Unit price with basic configuration Volume Discount | 98.58 € *Unit price with basic configuration | 83.15 € *Unit price with basic configuration Volume Discount | 110.50 € *Unit price with basic configuration | 20.02 € *Unit price with basic configuration | 88.82 € *Unit price with basic configuration Volume Discount | 57.40 € *Unit price with basic configuration Volume Discount | 49.20 € *Unit price with basic configuration Volume Discount | 35.60 € *Unit price with basic configuration | 62.70 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | Same day | 6 Days | 6 Days |
| R Size(mm) | 0.05 ～ 10 | 0.2 ～ 1.5 | 3 ～ 6 | 0.1 ～ 2 | 0.05 ～ 1.5 | 3 ～ 6 | 0.2 ～ 1.5 | 0.5 ～ 15 | 5 ～ 10 | 0.5 ～ 12.5 | 0.6 | 0.75 ～ 8 | 0.1 ～ 6 | 0.1 ～ 3 | 0.5 ～ 15 | 0.5 ～ 6 | 4 | 3 ～ 10 | 3 ～ 10 | 0.3 ～ 6 | 0.1 ～ 6 | 2 ～ 6 | 3 ～ 10 | 1 ～ 6 | 0.5 ～ 6 | 1 ～ 10 | 0.5 ～ 10 | 0.5 ～ 6 | 8 ～ 10 | 0.5 ～ 6 | 0.2 ～ 1.5 | 0.3 ～ 1.5 | 0.25 ～ 3 | 0.1 ～ 3 | 0.05 ～ 3 | 0.1 ～ 3 | 0.5 ～ 3 |
| Type | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Spherical Ball | Spherical Ball | Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball |
| work material | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] |
| Blade length (ℓ)(mm) | 0.2 ～ 38 | 0.8 ～ 8 | 12 ～ 22 | 0.16 ～ 3.2 | 0.2 ～ 8 | 4 ～ 7 | 0.3 ～ 1.8 | 2.5 ～ 55 | 10 ～ 20 | 2.5 ～ 50 | 3 | 1.5 ～ 24 | 0.4 ～ 18 | 0.2 ～ 6 | 2.5 ～ 55 | 1 ～ 12 | 8 | 12 ～ 38 | 6 ～ 20 | 0.6 ～ 22 | 0.16 ～ 12 | 8 ～ 22 | 12 ～ 38 | 2 ～ 12 | 1.5 ～ 18 | 5 ～ 38 | 1.5 ～ 30 | 0.7 ～ 8.1 | 12 ～ 15 | 1 ～ 12 | 0.3 ～ 1.8 | 0.5 ～ 2.4 | 0.5 ～ 6 | 0.16 ～ 4.8 | 0.08 ～ 6 | 0.16 ～ 4.8 | 0.75 ～ 4.5 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 |
| Coating | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | TiAlN | For General Steels (AlCrN, etc.) | Non-Coated | TiAlN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) |
| Overall Length (L)(mm) | 40 ～ 160 | 40 | 120 ～ 160 | 50 ～ 100 | 40 | 90 ～ 110 | 45 ～ 50 | 50 ～ 180 | 32 ～ 58 | 50 ～ 180 | 50 | 50 ～ 140 | 35 ～ 70 | 50 | 70 ～ 280 | 50 ～ 80 | 60 | 90 ～ 160 | 90 ～ 160 | 60 ～ 160 | 45 ～ 160 | 200 ～ 250 | 140 ～ 250 | 70 ～ 160 | 60 ～ 220 | 50 ～ 160 | 60 ～ 200 | 60 ～ 110 | 49 ～ 58 | 50 ～ 80 | 45 ～ 50 | 35 ～ 40 | 60 ～ 90 | 45 ～ 90 | 45 ～ 120 | 45 ～ 120 | 50 ～ 70 |
| Underneck length (ℓ1)(mm) | - | - | - | 1 ～ 30 | - | 20 | 1.2 ～ 6 | - | - | - | - | 3 ～ 8 | - | 1.1 ～ 9 | - | 2.5 ～ 30 | 16 | - | - | 10 ～ 80 | 1 ～ 80 | 100 ～ 140 | - | 20 ～ 85 | 6 ～ 160.8 | - | - | 5 ～ 60 | - | 2.5 ～ 30 | 2 ～ 15 | 1.5 ～ 12 | 2.5 ～ 30 | 0.5 ～ 40 | 0.3 ～ 50 | 0.5 ～ 50 | 4 ～ 30 |
| Shank diameter (d)(mm) | 4 ～ 20 | 3 | 5 ～ 11 | 6 | 3 | 6 ～ 12 | 4 ～ 6 | 4 ～ 25 | 6 ～ 12 | 4 ～ 25 | 4 | 4 ～ 16 | 4 ～ 12 | 6 | 3 ～ 25 | 6 ～ 12 | 8 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 4 ～ 16 | 10 ～ 16 | 6 ～ 20 | 6 ～ 16 | 6 ～ 20 | 4 ～ 20 | 6 ～ 20 | 6 ～ 12 | 10 ～ 12 | 6 ～ 12 | 4 ～ 6 | 4 | 6 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 4 ～ 6 |
| R Precision(μm) | -0.007 to 0.003 ～ ±0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.005～+0.005 | - | -0.01～+0.01 | -0.005～+0.005 | -0.01～+0.01 | -0.01～+0.01 | - | -0.01～+0.01 | -0.01～+0.01 ～ -0.005～+0.005 | -0.007～+0.003 ～ -0.005～+0.005 | -0.005～+0.005 | -0.01～+0.01 | -0.015～+0.015 ～ -0.01 | -0.003～+0.003 | -0.01～+0.01 | -0.01～+0.01 | -0.01～0.01 | -0.005 to +0.005 ～ -0.005～+0.005 | -0.01～0.01 | -0.015～+0.015 | -0.015～+0.015 | - | -0.015～+0.015 | -0.01～+0.01 | - | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.005～+0.005 | -0.005～+0.005 | -0.005～+0.005 | -0.005～+0.005 | -0.01～+0.01 | ±0.07 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- R3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- R 4.0
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- R4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.45
- 0.48
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.1
- 1.12
- 1.19
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.4
- 1.42
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.39
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.85
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.81
- 3.85
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.874
- 7
- 7.1
- 7.2
- 7.4
- 7.5
- 7.874
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.7
- 9
- 9.5
- 9.7
-
10～10.8
- 10
- 10.5
- 10.8
-
11～11.5
- 11
- 11.2
- 11.278
- 11.28
- 11.3
- 11.5
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.199
- 14.2
- 14.4
- 14.5
-
15
-
16～16.993
- 16
- 16.5
- 16.99
- 16.993
-
17～17.9
- 17
- 17.5
- 17.9
-
18
-
19
-
20
-
21～21.5
- 21
- 21.5
-
22～22.682
- 22
- 22.3
- 22.68
- 22.682
-
23
-
24
-
25
-
26～26.9
- 26
- 26.9
-
27
-
28～28.6
- 28
- 28.296
- 28.3
- 28.6
-
29
-
30
-
31.6
-
32
-
33
-
34
-
35
-
36～36.5
- 36
- 36.5
-
38
-
40
-
44.6
-
45～45.49
- 45
- 45.49
-
48
-
50
-
55
-
58
-
60
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
-
-
Number of flutes(sheet)
-
Coating
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
R Precision(μm)
-
Machining Application
Narrow search by specifying Brand
-
- MISUMI (30)
- OSG (37)
- NS TOOL (30)
- NACHI(FUJIKOSHI) (10)
- UNION TOOL (10)
- DIJET (7)
- OKAZAKI SEIKO (5)
- SANDVIK (5)
- THE CUT (5)
- 7 LEADERS (4)
- SANKO MFG (4)
- ATOM (3)
- ASAHI TOOLS (2)
- KYOWA SEIKO (2)
- SPEED TIGER (2)
- TOYO DRILL (1)
- EIKOSHA (1)
- KYOCERA (1)
- WIDIN (1)
- GUHRING (0)
- VAN_HOORN (0)
- CREATE TOOL (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Carbide Ball End Mills
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.