Holder（Page 2）

?* Information on days to ship and prices

• 

  Coaxial Type Lens Holder

  SURUGA SEIKI

  A holder that can fix lenses of any diameter and always keep the center of the held lens constant. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	162.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adapter for Rotation

  SURUGA SEIKI

  [Features]
  · An adapter for attaching and rotating adapters for FC connectors and adapters for ferrules.
  · Used by attaching to various types of cross motion holder.
  · When using, fix the rotation adapter in the holder and then set the adapter and device.
  · The scale features degrees markings every 1°.
  

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	134.97 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Fixed Type Holder

  SURUGA SEIKI

  Can retain and fix various types of adapter. The optical axis height is standardized at 25 mm from the bottom. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	38.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adapter for Objective Lenses

  SURUGA SEIKI

  Used by attaching to various types of cross motion holder.
  
  [Features]
  · An adapter for objective lenses.
  · Used by attaching to various types of cross motion holder.
  · The objective lens is fixed by screwing in.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	38.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Small Mirror Holder (with Lock)

  SURUGA SEIKI

  [Features]
  · A holder for holding small mirrors up to ø30 mm. The tilt (θy, θz) can be adjusted in the two axes.
  · Adhesive type and three-point support type fixing are available for the mirror fixing methods.
  · With the rod-less type, M3 or M6 screws are used for fixing.
  · With the three-point support type (F58N-30-2), mirrors from ø20 to 30 mm can be held by changing the position of the lower supporting pin.
  · The fine tilt-adjustment knob is P = 0.5 mm and can be fixed to a set incline with a lock nut.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	108.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Small Top Operated Mirror Holder

  SURUGA SEIKI

  [Features]
  · A small top operated mirror holder with excellent stability and operability.
  · Can hold small mirrors up to ø30. The tilt can be adjusted in the two axes.
  · The tilt axis can be locked using the included lock nut.
  · The mirror can be fixed using either adhesive or via the three-point support method.
  · Types with a rod and types without a rod are available.
  · With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	144.27 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fine Movement Small Mirror Holder

  SURUGA SEIKI

  A holder that can hold small mirrors up to ø30. The tilt can be adjusted in the two axes.
  
  [Features]
  · The fine-movement resolution is 0.7°/rotation, two times that of F58N.
  · Adhesive type and three-point support type fixing are available for the mirror fixing methods.
  · Both the adhesive and screw types are available with or without a rod.
  · With the rod-less type, M3 or M6 screws are used for fixing.
  · With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	108.18 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Fine Movement Small Mirror Holder (with Lock)

  SURUGA SEIKI

  [Features]
  · The FM58 with an added tilt-lock nut.
  · Adhesive type and three-point support type fixing are available for the mirror fixing methods.
  · Both the adhesive and screw types are available with or without a rod.
  · With the rod-less type, M3 or M6 screws are used for fixing.
  · With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	108.48 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Prism Holder with Fine Adjustment Function

  SURUGA SEIKI

  Can rotate prisms, cube beam splitters, and similar other objects and tilt them in the two axes. Prisms are fixed using the slide clamp screw on the upper part and an element clamp screw.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	226.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Polarizer Holder with Fine Adjustment Function

  SURUGA SEIKI

  [Features]
  · A holder consisting of the F62 type polarizer holder with additional fine adjustment functionality.
  · Allows for 360° coarse movement with the clamp loosened. With the clamp tightened, it can perform micro adjustments on the micrometer head to ±4°.
  · The F63-30N can be fitted with the F69polarizing prism adapter.
  · The scale is structured in a way that allows zero point alignment, and so can be set to any angle from the reference angle.
  · Calculating the optical axis of the rod stand.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	316.01 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Leaf Spring Type Filter Holder

  SURUGA SEIKI

  [Features]
  · A holder for holding square and round filters.
  · Can be fitted with up to four filters with external diameters of ø50 mm.
  · Filters are fixed by inserting them from the top whereupon the leaf spring will push them against the reference surface.
  · As the tilt of the filter (even when replacing them) remains constant in relation to the optical axis, the optical axis will not shift dramatically.
  · The filters will not abut against each other.
  · The filter-contacting portion of the leaf spring is made of resin.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	126.45 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Resin Ring

  SURUGA SEIKI

  [Features]
  · A product for fixing lenses and mirrors to holders by the manufacturer.
  · Note that this product has been designed exclusively for holders from the manufacturer.
  · Note that even when the diameters are the same, the shapes can differ depending on the product.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.21 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Water-Cooling Adapter

  SURUGA SEIKI

  [Features]
  · A water cooling adapter for F125/F126/F127 LD holders
  · Connect to water tanks which circulate water at low temperatures to enable superior temperature stability and low temperature control.
  · Connect using a 1/4 inch hose (hose not included)

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	106.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Precision Cross Motion Holder

  SURUGA SEIKI

  Can support and hold various types of adapter, and finely adjust them in the YZ axes. Enables a smooth and straight feed. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	341.88 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Precision Cross Motion Holder (□45 Type)

  SURUGA SEIKI

  A holder with a through hole of ø14 mm that can support and fix various types of adapter, and finely adjust them in the YZ axes and Yzθyθz axes. Delivers both in terms of thinness and high precision movement.
  
  [Features]
  · V-groove rails and cross rollers are used for the guide. Boasts a thickness of just 16 mm (YZ part) and high precision movement.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	387.89 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Precision Cross Motion Holder (□60 Type)

  SURUGA SEIKI

  A holder with a through hole of ø25 mm that can support and fix various types of adapter, and finely adjust them in the YZ axes and Yzθyθz axes. Delivers both in terms of thinness and high precision movement.
  
  [Features]
  · V-groove rails and cross rollers are used for the guide. Boasts a thickness of just 16 mm (YZ part) and high precision movement.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	415.88 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Precision Plate Type Cross Motion Holder

  SURUGA SEIKI

  [Features]
  · A holder with a through hole of ø14 mm that can support and fix various types of adapter, and finely adjust them in the YZ axes and Yzθyθz axes.
  · A plate type with good stability. Ideal for experiments with low optical axes.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	396.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Bracket for Element Adapters

  SURUGA SEIKI

  A bracket to which various types of adapter can be mounted. Can be mounted to a tilt stage. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	117.10 €
  Min. Shipping Days ：	23 Days

  *Unit price with basic configuration

• 

  Centering Lens Holder: for Collimating Lenses, Fixed Type

  SURUGA SEIKI

  [Features]
  · Can be used for the construction of optical systems.

  Select to compare

  › Configure now
  Starting from∗ ：	58.15 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Centering Lens Holder: for Collimating Lenses, Stability and Operability-Emphasized Type

  SURUGA SEIKI

  [Features]
  · Can be used for the construction of optical systems.

  Select to compare

  › Configure now
  Starting from∗ ：	394.07 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Centering Lens Holder: for Collimating Lenses, Precision Cross Roller Type

  SURUGA SEIKI

  [Features]
  · Can be used for the construction of optical systems.

  Select to compare

  › Configure now
  Starting from∗ ：	368.94 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Centering Lens Holder: Single Lens, Fixed Type

  SURUGA SEIKI

  Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	85.29 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Centering Lens Holder: Single Lens, Stability and Operability-Emphasized Type

  SURUGA SEIKI

  Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	413.86 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Centering Lens Holder: Objective Lens, Fixed Type

  SURUGA SEIKI

  [Features] Inexpensive optical holder without adjustment mechanism. [Features] It can be used for optical experiments.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	77.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Centering Lens Holder: Objective Lens, Stability and Operability-Emphasized Type

  SURUGA SEIKI

  [Features]
  · Can be used for the construction of optical systems.
  · When using objective lenses with large outer diameters. The F504-40 series high rigidity cross motion holder is recommended.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	404.87 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Centering Lens Holder: Objective Lens, Precision Cross Roller Type

  SURUGA SEIKI

  [Features]
  · Can be used for the construction of optical systems.
  · When using objective lenses with large outer diameters. The F504-40 series high rigidity cross motion holder is recommended.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	368.94 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Thin Polarizer Holder (Optical Axis 25 mm)

  SURUGA SEIKI

  A holder used for retaining and rotating polarizing plates, polarizing filters, and wave plates, etc. The optical axis height is standardized at 25 mm from the bottom. Scale notches are placed every 90°.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	128.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Iris Diaphragm

  SURUGA SEIKI

  [Features]
  · A holder with an iris diaphragm.
  · The aperture diameter is variable from ø1.5 to ø27 mm.
  · Rotate the aperture-adjustment knob (shared with the clamp) to fix.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	203.78 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adapter for Iris Diaphragms

  SURUGA SEIKI

  Used by attaching to various types of cross motion holder. The diaphragm diameter can be changed from ø1 to ø12 mm. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	128.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High Rigidity Cross Motion Holder

  SURUGA SEIKI

  A precision cross motion holder that can support and hold various types of adapter, and finely adjust them in the YZ axes. Includes a direct lock mechanism that can directly fix the movable parts. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	351.07 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High Stability Mirror Holder

  SURUGA SEIKI

  A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	144.31 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  High Performance Mirror Holder (25 mm Optical Axis Type)

  SURUGA SEIKI

  [Features]
  · A compact version of the FM532.
  · Designed with an optical axis height of 25 mm. For use with the Opt Station.
  · A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	117.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High Performance Cross Motion Holder

  SURUGA SEIKI

  Can be mounted with various types of adapter and then finely adjust them in the YZ axes. Capable of a smooth and straight feed. Designed with an optical axis height of 25 mm from the bottom. For use with the Opt Station.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	377.82 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Filter Holder

  SURUGA SEIKI

  [Features]
  · A holder for setting round and square type filters.
  · Can be fitted with up to four filters with external diameters of ø50 mm.
  · Filters are inserted from the top, but as they are only placed down, they can be angled depending on the filter thickness.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	129.71 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Filter Holder

  SURUGA SEIKI

  [Features]
  · A holder for setting filters with diameters of ø15 mm or ø20 mm.
  · The optical axis height is standardized at 25 mm from the bottom.
  · Can be fitted with two filters.
  · Fix by loosening the clamp and sliding the holding part backwards or forwards in line with the thickness of the filter.
  · Filters with a thickness of up to 4 mm are supported.
  · The bottom plate features an M4 tapped hole. Mount a rod to change to a rod type.
  · The F561-20 can also be used as a simplified polarizing element holder by directly turning the element.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	125.94 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Kinematic Round Mirror Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A three-point support type mirror holder.
  · The sample is fixed using set screws and a pad (round and square types only).
  · The set screw can be turned using a straight slot flathead screwdriver (not included). The round mirror holder is for circular optical devices. The tilt can be adjusted in the two axial directions.
  · The square mirror holder if for square optical devices. The tilt can be adjusted in the two axial directions.
  · The grooved mirror holder is for rectangular optical devices. The tilt can be adjusted in the two axial directions (square optical devices can also be used).

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	160.45 €
  Min. Shipping Days ：	16 Days

  *Unit price with basic configuration

• 

  Simple Mirror Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The mirror holder fixes optical devices by affixing them. As such, it can be used with both circular and rectangular shaped objects.
  · A kinematic type in which the tilt can be adjusted using the inclined fulcrum (right-top) as a guide.
  · Available with a shaft (ø8 mm, length 60 mm) or with a base plate (long hole for M6 screws).

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	106.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Groove Type Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A holder for mirrors and charts, etc. Insert the corresponding item into the groove and fix in place with a clamp screw.
  · Duracon® is inserted at the tip of the clamp screw and a fluoropolymer sheet is attached to the other side in order to avoid scratching of the clamped item.
  "Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	63.88 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Adapter

  CHUO PRECISION INDUSTRIAL

  [Features]
  · For changing the aperture to fit the holder when using a lens that does not fit

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	44.48 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  V-Type Lens Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The HL-C30, HL-C70, and HL-C100 are lens holders with grooves for fixing lenses. There are three products available depending on the maximum size of the object that can be fixed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	102.83 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cylindrical Lens Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A lens holder with a groove for fixing cylindrical lenses.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	115.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Lens Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A holder for circular lenses (can also be used with mirrors).
  · Metal frame and shaft only. Does not include a tilt adjustment function.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	123.36 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Ring Wrench

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A ring wrench that uses bits.
  · Can be used with products that have slits in the press ring such as adapters, mirror holders, and lens holders.
  · The MHZ-1 is a fixed bit type. The range of use for the MHZ-2 can be increased by changing the position of the bit.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	38.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Small and Thin Y Type Rail

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A Y type aluminum rail.
  · Carriers (the C-211(- 1)P and C-211(- 2)P) can be used for X type rails as is.
  · Can be used with a lower optical axis than X types.
  · The spacing between the M6 counterbore holes for attaching to surface plates is 100 mm.
  · With a lever type magnet stand mounted using the M4 counterbore holes, it is possible to magnetically attach and fix to surface plates, etc.
  · Includes memory with scale.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	329.51 €
  Min. Shipping Days ：	20 Days

  *Unit price with basic configuration

• 

  Small X Type Rail

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An X type aluminum rail.
  · Slides using a dedicated carrier.
  · Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
  · Includes memory with scale.
  · Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws, and M4 screws, etc.
  · X type rails can be fixed and retained using rail stands or T type carriers.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	140.23 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

Loading...