• 10 million products
  • Same-day shipment for 30.000 stock items
  • Competitive prices

Our business hours are 08:00 to 17:00 (Mon-Thu) / 08:00 to 16:00 (Fri). (GMT+2)

Search by category
or manufacturer

Category search
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Material Handling & Storage
Safety & General Supplies
Lab & Clean Room Supplies
Press Die Components
Plastic Mold Components

Manufacturer search
Manufacturer list

Mirror Holders

  • Data to be displayed
    30
    45
    60
  • Sort
Shipping Days
  • ALL
  • 3 Days or Less
  • 4 Days or Less
  • 6 Days or Less
  • 7 Days or Less
  • 8 Days or Less
  • 9 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 23 Days or Less
  • 32 Days or Less
  • Rectangular Mirror Holder

    Rectangular Mirror Holder

    SURUGA SEIKI

    [Features] · Holder for fastening square mirrors, filters, projection plates, and the like. · Fastening done with two screws. · Holder only for fastening. · Two types of holders with 60 mm and 100 mm width.

    CAD
    2D3D
    Starting from
    55.78€
    Min. Shipping Days
    4 Days

    *Unit price with basic configuration

  • Compact Mirror Holder (with lock)

    Compact Mirror Holder (with lock)

    SURUGA SEIKI

    [Features] · The holder fixes a compact mirror up to ø30 mm and enables fine tuning of the tilt in the directions of two axes (θy, θz). · The mirror fixing methods are "adhesion type" and "three-point support type." · The type without rod is fixed with M3 screw or M6 screw. · The three-point support type (F58N-30-2) can fix a mirror up to mirror with a diameter of ø20–30 mm by changing the position of the lower supporting pin. · The tilt adjusting knob can be turned with 0.5 mm increments (P = 0.5 mm), and fixed with the locknut.

    CAD
    2D3D
    Starting from
    92.31€
    Min. Shipping Days
    Quote

    *Unit price with basic configuration

  • Gimbaled Mirror Holder

    Gimbaled Mirror Holder

    SURUGA SEIKI

    This is a holder where mirrors, plate beam splitters and other elements are fixed and the tilt can be adjusted on two axes. The rotation center during slight movements and the center of the mirror is always the same. [Features] ■ F50, F55 · This is a holder where mirrors, plate beam splitter, lens and other elements are fixed, and tilt can finely adjusted (θy, θz). · If clamp is tightened on both θy and θz, slight movement of ±4°-6° is possible, and if the clamp is loosened, a coarse adjustment of 360° is possible. · Because it is a gimbal mechanism, the center of rotation for slight movement and coarse movement is always the same as the center of the mirror. · Standard rod that is included is ø20, L=60 mm, but the rod length can be changed. Screw holes in the holder are M6P=1, and A40-A42 rods can be used. · Mirror Holder F50: Feed method is the A type micrometer head and the screw type E type. · Horizontal operation mirror holder F55: It is a unique horizontal operation (the operation system is mounted in a horizontal direction) so it can be operated without putting touching the optical axis, and proximity specification is possible. ■ F52 · This is a holder where mirrors, plate beam splitter, lens and other elements are fixed, for which tilt can be slightly adjusted on two axes (θy, θz). · 2-axis tilt (θy, θz). Slight adjustment of ±2° or ±3° (F52) is possible. · Because it is a gimbal mechanism, the center of rotation for slight movement and coarse movement is always the same as the center of the mirror. · Removal of elements such as mirror and such use the screw ring method, and there is a resin ring for protection attached included.

    CAD
    2D3D
    Starting from
    169.22€
    Min. Shipping Days
    8 Days

    *Unit price with basic configuration

  • Beam steering holder

    Beam steering holder

    SURUGA SEIKI

    [Features] · Types with only the upper mirror movable and with both upper and lower mirrors movable are available. · The available adjustment screw pitches are 0.5 mm and 0.25 mm. · The mirror is fixed by adhesion or by three-point support. · The lower side of the ball is M16P=1 mm male screw. · This can be fixed to a magnet base, plate, etc.

    CAD
    2D3D
    Starting from
    233.07€
    Min. Shipping Days
    6 Days

    *Unit price with basic configuration

  • Kinematic Square Mirror Holder

    Kinematic Square Mirror Holder

    CHUO PRECISION INDUSTRIAL

    [Features] · The mirror holder is three-point supported. · Fix the sample with locking screw and cover (only round and box shape). · The locking screw can be turned with a minus driver (this is not supplied). · For square optical elements; supports two-axis direction tilt adjustment.

    CAD
    2D
    Starting from
    107.88€
    Min. Shipping Days
    32 Days

    *Unit price with basic configuration

  • Half-inch Mirror Holder

    Half-inch Mirror Holder

    SURUGA SEIKI

    The mirror holder is dedicated to mirror with a diameter of ø12.7 mm. Two types of operation screws: the knurled knob, which can be operated by hand, and the set bolt type for embedded equipment, which can prevent mis-operation, are available. [Features] · Newly designed on the concept of small size and high performance. · Although the machine body is compact enough to fit in a 1-inch cubic meter of space, the holder reduces the meandering width and the hysteresis width of two axes - θy and θz - to several order of microrads, and delivers the top level of stability for 60 hours after being located (at normal temperature). · The holder can be mounted with an M4 screw that has a step to prevent the holder from rotating. · The mounting plate type that can be installed at positions of 0° and 45° are also available. · When the plate is used, the rod axis flushes with the mirror reflecting surface.

    CAD
    2D3D
    Starting from
    91.85€
    Min. Shipping Days
    8 Days

    *Unit price with basic configuration

  • Compact Mirror Holder (Optical Axis 25 mm Type)

    Compact Mirror Holder (Optical Axis 25 mm Type)

    SURUGA SEIKI

    Mirror holder with an optical axis height 25 mm; for Opt Station. The user can select the mounting method so that the element distortion does not occur due to the mounting. *The CAD data for this series is being revised. This product will be available as soon as modifications are complete.

    CAD
    2D3D
    Starting from
    92.00€
    Min. Shipping Days
    4 Days

    *Unit price with basic configuration

  • Mirror Holder (Strip Clamp)

    Mirror Holder (Strip Clamp)

    SURUGA SEIKI

    A mirror holder that uses a slit clamp (slit fastening) system. *The CAD data for this series is being revised. This product will be available as soon as modifications are complete.

    CAD
    2D3D
    Starting from
    122.45€
    Min. Shipping Days
    8 Days

    *Unit price with basic configuration

  • Small Upward Operational Mirror Holder

    Small Upward Operational Mirror Holder

    SURUGA SEIKI

    Upward operational mirror holder with excellent safety and operability. *The CAD data for this series is being revised. This product will be available as soon as modifications are complete.

    CAD
    2D3D
    Starting from
    183.31€
    Min. Shipping Days
    8 Days

    *Unit price with basic configuration

  • Grooved Holder

    Grooved Holder

    CHUO PRECISION INDUSTRIAL

    [Features] · Holder to put a mirror, chart, etc. into the groove and fix it with a clamp screw. · Duracon (R) is inserted into the tip of the clamp screw, and a Teflon sheet is mounted to the opposite side such that the sandwiched object is not scratched "Duracon (R)" is a registered trademark of Polyplastics Co,. Ltd. in Japan and other countries.

    CAD
    2D
    Starting from
    54.51€
    Min. Shipping Days
    12 Days

    *Unit price with basic configuration

  • Mirror Holder

    Mirror Holder

    SURUGA SEIKI

    This is an inexpensive mirror holder for fixing an element such as a mirror or a plate beam splitter, and it can make two-axis fine tilt adjustments. *The CAD data for this series is being revised. This product will be available as soon as modifications are complete.

    CAD
    2D3D
    Starting from
    100.49€
    Min. Shipping Days
    Quote

    *Unit price with basic configuration

  • Precision Mirror Holder (Gimbal Type)

    Precision Mirror Holder (Gimbal Type)

    SURUGA SEIKI

    Center of tilt axis matches the mirror surface. Able to freely change to right-left, vertical 45° incident type by switching the plate. *The CAD data for this series is being revised. This product will be available as soon as modifications are complete.

    CAD
    2D3D
    Starting from
    258.88€
    Min. Shipping Days
    9 Days

    *Unit price with basic configuration

  • Small Upward Operation Mirror Holder

    Small Upward Operation Mirror Holder

    SURUGA SEIKI

    [Features] · Compact type upward operation mirror holder with excellent safety and operability. · Holds a small mirror up to ⌀30 and allows two-axis tilt fine adjustment. · The tilt shaft can be locked with the lock nut. · There are two mirror fixing methods: adhesion and three-point support. · There are types with and without a rod. · For the three-point support type, mirrors of ⌀20 to ⌀30 can be fixed by replacing two pins.

    CAD
    2D3D
    Starting from
    122.45€
    Min. Shipping Days
    8 Days

    *Unit price with basic configuration

  • Simple mirror holder

    Simple mirror holder

    CHUO PRECISION INDUSTRIAL

    [Features] · A fixed mirror holder optical element mount, enabling either round or rectangular shapes to be used. · Kinematic type that returns the tilting fulcrum (upper right) to standard tilt adjustment. · With shaft (⌀8 mm, length 60 mm) and with base board (M6 screw use long hole) also available.

    CAD
    2D
    Starting from
    107.44€
    Min. Shipping Days
    8 Days

    *Unit price with basic configuration

  • Kinematic Groove Mirror Holder

    Kinematic Groove Mirror Holder

    CHUO PRECISION INDUSTRIAL

    [Features] · The mirror holder is three-point supported. · The locking screw can be turned with a minus driver (this is not supplied). · Two-axis direction tilt adjustment is available for rectangular optical elements (and for square optical elements). · Two-axis direction tilt adjustment is available for rectangular optical elements (and for square optical elements).

    CAD
    2D
    Starting from
    107.93€
    Min. Shipping Days
    33 Days

    *Unit price with basic configuration

  • Small Mirror Holder

    Small Mirror Holder

    SURUGA SEIKI

    A holder that can hold small mirrors in dimensions up to ø30 mm and adjust 2-axis tilts. [Features] · The fine resolution is twice that of F58N and handles 0.7°/rotation. · The mirror fixing methods are "adhesion type" and "three-point support type." · Detachable, screw-in, rod type, and rod-less types are available. · The type without rod is fixed with M3 screw or M6 screw. · For the three-point supporting type, the mirror can be fixed in position by replacing the pins in two places from ⌀ 20 mm to ⌀ 30 mm.

    CAD
    2D3D
    Starting from
    92.04€
    Min. Shipping Days
    Quote

    *Unit price with basic configuration

  • High Stability Mirror Holder

    High Stability Mirror Holder

    SURUGA SEIKI

    This product is ideal for locations requiring stability and operability, and locations in which high precision or alignment processes are required. *The CAD data for this series is being revised. This product will be available as soon as modifications are complete.

    CAD
    2D3D
    Starting from
    122.48€
    Min. Shipping Days
    8 Days

    *Unit price with basic configuration

  • Kinematic round mirror holder

    Kinematic round mirror holder

    CHUO PRECISION INDUSTRIAL

    [Features] · The mirror holder is three-point supported. · Fix the sample with locking screw and cover (only round and box shape). · The stopper screw can be turned using a flat screwdriver (not supplied). The 2-axis tilt of round mirror holders can be adjusted using a round optical element. · The 2-axis tilt of square mirror holders can be adjusted using a square (oblong) optical element. · The 2-axis tilt of grooved mirror holders can be adjusted using a rectangular optical element. (Oblong optical elements can also be used.)

    CAD
    2D
    Starting from
    107.82€
    Min. Shipping Days
    33 Days

    *Unit price with basic configuration

  • High-Performance Mirror Holder (Optical Axis: 25 mm Type)

    High-Performance Mirror Holder (Optical Axis: 25 mm Type)

    SURUGA SEIKI

    [Features] · Small specification of FM532. · Optical axis height of 25 mm is designed for optical stations. · This product is ideal for locations that require stability and operability, and locations in which high precision or alignment processes are required.

    CAD
    2D3D
    Starting from
    99.61€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Upper operation gimbal type mirror holder

    Upper operation gimbal type mirror holder

    CHUO PRECISION INDUSTRIAL

    [Features] · A mirror holder that incorporates a round mirror and uses gimbal to match the mirror center to the center of the holder's rotations. · Tilt adjustments are from the upper part of the holder and so there is no risk of cutting across optics when adjusting. · Shaft mounting direction can be changed by 90°.

    CAD
    2D
    Starting from
    249.16€
    Min. Shipping Days
    23 Days

    *Unit price with basic configuration

  • Fine Movement Small Type Mirror Holder, with Lock

    Fine Movement Small Type Mirror Holder, with Lock

    SURUGA SEIKI

    [Features] · FM58 includes a tilt lock nut. · The mirror fixing methods are 'Detachable Type' and 'Three-Point Supporting type.' · Detachable, screw-in, rod type, and rod-less types are available. · The type without rod is fixed with M3 screw or M6 screw. · For the three-point supporting type, the mirror can be fixed in position by replacing the pins in two places from ⌀ 20 mm to ⌀ 30 mm.

    CAD
    2D3D
    Starting from
    92.27€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

Configure

Reset

Narrow search by specifying manufacturer

Brand

MISUMI Public Circulation Product Business

Narrow search by specifying CAD data type

  • 2D
  • 3D

Select Image

Close