Cutting punches / cylindrical head / push-off pin / dowel hole / stepped / Dicoat
Click on this image to zoom in.
Click on this image to zoom in.
- FLANGE
- SKD11
- DICOAT
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Jector | Tip shape | B (Tip length) | D (Shank diameter) (mm) | P (Tip dimension) (mm) | L (L dimension) (mm) | LC (Full length alteration) (mm) | R (Tip corner R) (mm) | W (Tip dimension) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Quote | 10 | Standard type | A | L | 10 | 3 ～ 9.99 | 70 ～ 100 | - | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 10 | 3 ～ 9.99 | - | 53 ～ 69.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 10 | 3 ～ 9.99 | - | 70 ～ 90 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 10 | 3 ～ 9.99 | - | 70.1 ～ 79.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 10 | 3 ～ 9.99 | - | 80.1 ～ 89.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 10 | 3 ～ 9.99 | - | 90.1 ～ 99.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | 6 ～ 12.99 | 70 ～ 100 | - | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | - | 70 ～ 100 | - | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | 6 ～ 12.99 | - | 53 ～ 69.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | - | - | 53 ～ 69.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | 6 ～ 12.99 | - | 70 ～ 90 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | - | - | 70 ～ 90 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | 6 ～ 12.99 | - | 70.1 ～ 79.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | - | - | 70.1 ～ 79.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | 6 ～ 12.99 | - | 80.1 ～ 89.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | - | - | 80.1 ～ 89.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | 6 ～ 12.99 | - | 90.1 ～ 99.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 13 | - | - | 90.1 ～ 99.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | 10 ～ 15.99 | 70 ～ 100 | - | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | - | 70 ～ 100 | - | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | 10 ～ 15.99 | - | 47 ～ 69.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | - | - | 47 ～ 69.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | 10 ～ 15.99 | - | 70 ～ 90 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | - | - | 70 ～ 90 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | 10 ～ 15.99 | - | 70.1 ～ 79.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | - | - | 70.1 ～ 79.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | 10 ～ 15.99 | - | 80.1 ～ 89.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | - | - | 80.1 ～ 89.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | 10 ～ 15.99 | - | 90.1 ～ 99.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 16 | - | - | 90.1 ～ 99.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | 13 ～ 19.99 | 70 ～ 100 | - | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | - | 70 ～ 100 | - | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | 13 ～ 19.99 | - | 47 ～ 69.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | - | - | 47 ～ 69.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | 13 ～ 19.99 | - | 70 ～ 90 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | - | - | 70 ～ 90 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | 13 ～ 19.99 | - | 70.1 ～ 79.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | - | - | 70.1 ～ 79.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | 13 ～ 19.99 | - | 80.1 ～ 89.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | - | - | 80.1 ～ 89.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | 13 ～ 19.99 | - | 90.1 ～ 99.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 20 | - | - | 90.1 ～ 99.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | 18 ～ 24.99 | 70 ～ 100 | - | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | - | 70 ～ 100 | - | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | 18 ～ 24.99 | - | 47 ～ 69.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | - | - | 47 ～ 69.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | 18 ～ 24.99 | - | 70 ～ 90 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | - | - | 70 ～ 90 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | 18 ～ 24.99 | - | 70.1 ～ 79.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | - | - | 70.1 ～ 79.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | 18 ～ 24.99 | - | 80.1 ～ 89.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | - | - | 80.1 ～ 89.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | 18 ～ 24.99 | - | 90.1 ～ 99.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 25 | - | - | 90.1 ～ 99.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 32 | 20 ～ 31.99 | 70 ～ 120 | - | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 32 | - | 70 ～ 120 | - | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 32 | 20 ～ 31.99 | - | 47 ～ 69.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 32 | - | - | 47 ～ 69.9 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 32 | 20 ～ 31.99 | - | 70 ～ 110 | - | - | ||
- | 1 | Quote | 10 | Standard type | A | L | 32 | - | - | 70 ～ 110 | - | - |
Loading...
Basic information
| Heavy-load punches | No | Shank type | Single-stepped | Material | SKD11 Equivalent |
|---|---|---|---|---|---|
| Surface treatment | Dicoat | Shank (mounting part) shape | With locating dowel hole | Shank diameter D tolerance | m5 |
| T (Head thickness/plate thickness)(mm) | 5 |
Configure
Basic Attributes
-
Jector
- Standard type
- Spring reinforced type
-
Tip shape
- A
- D
- R
- E
- G
-
B (Tip length)
- L
- S
-
D (Shank diameter)(mm)
- 10
- 13
- 16
- 20
- 25
- 32
- 38
- 45
-
P (Tip dimension)(mm)
-
L (L dimension)(mm)
-
LC (Full length alteration)(mm)
[47-69.9/0.1mm Unit(s)][70.1-79.9/0.1mm Unit(s)][80.1-89.9/0.1mm Unit(s)][90.1-99.9/0.1mm Unit(s)][100.1-109.9/0.1mm Unit(s)][110.1-119.9/0.1mm Unit(s)][60-110/10mm Unit(s)]
-
R (Tip corner R)(mm)
-
W (Tip dimension)(mm)
-
Type
- T-SJAL-C
- T-SJAS-C
- T-SJDL-C
- T-SJDS-C
- T-SJEL-C
- T-SJES-C
- T-SJGL-C
- T-SJGS-C
- T-SJRL-C
- T-SJRS-C
- T-SJVAL-C
- T-SJVAS-C
- T-SJVDL-C
- T-SJVDS-C
- T-SJVEL-C
- T-SJVES-C
- T-SJVGL-C
- T-SJVGS-C
- T-SJVRL-C
- T-SJVRS-C
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.